TY  - JOUR
AU  - Nedeljković, Borivoje
AU  - Mitrović, Nebojša
AU  - Orelj, Jelena
AU  - Obradović, Nina
AU  - Pavlović, Vladimir
PY  - 2017
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/4476
AB  - In this study the characterization of FeCo-2V alloys toroidal samples produced by PIM/MIM technology was presented. The feedstock for metal injection molding (MIM) was prepared by mixing starting FeCoV powder with a low viscosity binder. Green samples were subjected to solvent debinding and subsequent thermal debinding followed by sintering. Sintering was performed during 3.5 hours from 1370 degrees C to 1460 degrees C in hydrogen atmosphere in order to attain the appropriate mechanical and magnetic properties. Microstructure, hardness HV10 and magnetic hysteresis B(H) were investigated as a function of sintering temperature. Optimum combination of functional properties was observed after sintering at temperature of 1370 degrees C. In addition, magnetic properties were analyzed as frequency dependent and successfully simulated in operating frequency range from 5 Hz to 60 Hz.
PB  - Međunarodni Institut za nauku o sinterovanju, Beograd
T2  - Science of Sintering
T1  - Characterization of FeCoV Alloy Processed by PIM/MIM Route
EP  - 309
IS  - 3
SP  - 299
VL  - 49
DO  - 10.2298/SOS1703299N
ER  - 

@article{
author = "Nedeljković, Borivoje and Mitrović, Nebojša and Orelj, Jelena and Obradović, Nina and Pavlović, Vladimir",
year = "2017",
abstract = "In this study the characterization of FeCo-2V alloys toroidal samples produced by PIM/MIM technology was presented. The feedstock for metal injection molding (MIM) was prepared by mixing starting FeCoV powder with a low viscosity binder. Green samples were subjected to solvent debinding and subsequent thermal debinding followed by sintering. Sintering was performed during 3.5 hours from 1370 degrees C to 1460 degrees C in hydrogen atmosphere in order to attain the appropriate mechanical and magnetic properties. Microstructure, hardness HV10 and magnetic hysteresis B(H) were investigated as a function of sintering temperature. Optimum combination of functional properties was observed after sintering at temperature of 1370 degrees C. In addition, magnetic properties were analyzed as frequency dependent and successfully simulated in operating frequency range from 5 Hz to 60 Hz.",
publisher = "Međunarodni Institut za nauku o sinterovanju, Beograd",
journal = "Science of Sintering",
title = "Characterization of FeCoV Alloy Processed by PIM/MIM Route",
pages = "309-299",
number = "3",
volume = "49",
doi = "10.2298/SOS1703299N"
}

Nedeljković, B., Mitrović, N., Orelj, J., Obradović, N.,& Pavlović, V.. (2017). Characterization of FeCoV Alloy Processed by PIM/MIM Route. in Science of Sintering
Međunarodni Institut za nauku o sinterovanju, Beograd., 49(3), 299-309.
https://doi.org/10.2298/SOS1703299N

Nedeljković B, Mitrović N, Orelj J, Obradović N, Pavlović V. Characterization of FeCoV Alloy Processed by PIM/MIM Route. in Science of Sintering. 2017;49(3):299-309.
doi:10.2298/SOS1703299N .

Nedeljković, Borivoje, Mitrović, Nebojša, Orelj, Jelena, Obradović, Nina, Pavlović, Vladimir, "Characterization of FeCoV Alloy Processed by PIM/MIM Route" in Science of Sintering, 49, no. 3 (2017):299-309,
https://doi.org/10.2298/SOS1703299N . .

TY  - CONF
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Pavlović, Vladimir B.
AU  - Peleš, Adriana
AU  - Marković, Smilja
AU  - Mitrić, Miodrag
AU  - Mitrović, Nebojša
PY  - 2014
UR  - http://dais.sanu.ac.rs/123456789/634
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5701
AB  - Conference abstract
PB  - Beograd : Društvo za ETRAN
C3  - Zbornik apstrakata i program 58. konferencije ETRAN-a, Vrnjačka Banja, 2-5. jun 2014.
T1  - Mehanohemijska sinteza magnezijum titanata
EP  - 46
SP  - 46
UR  - https://hdl.handle.net/21.15107/rcub_dais_634
ER  - 

@conference{
author = "Filipović, Suzana and Obradović, Nina and Pavlović, Vladimir B. and Peleš, Adriana and Marković, Smilja and Mitrić, Miodrag and Mitrović, Nebojša",
year = "2014",
abstract = "Conference abstract",
publisher = "Beograd : Društvo za ETRAN",
journal = "Zbornik apstrakata i program 58. konferencije ETRAN-a, Vrnjačka Banja, 2-5. jun 2014.",
title = "Mehanohemijska sinteza magnezijum titanata",
pages = "46-46",
url = "https://hdl.handle.net/21.15107/rcub_dais_634"
}

Filipović, S., Obradović, N., Pavlović, V. B., Peleš, A., Marković, S., Mitrić, M.,& Mitrović, N.. (2014). Mehanohemijska sinteza magnezijum titanata. in Zbornik apstrakata i program 58. konferencije ETRAN-a, Vrnjačka Banja, 2-5. jun 2014.
Beograd : Društvo za ETRAN., 46-46.
https://hdl.handle.net/21.15107/rcub_dais_634

Filipović S, Obradović N, Pavlović VB, Peleš A, Marković S, Mitrić M, Mitrović N. Mehanohemijska sinteza magnezijum titanata. in Zbornik apstrakata i program 58. konferencije ETRAN-a, Vrnjačka Banja, 2-5. jun 2014.. 2014;:46-46.
https://hdl.handle.net/21.15107/rcub_dais_634 .

Filipović, Suzana, Obradović, Nina, Pavlović, Vladimir B., Peleš, Adriana, Marković, Smilja, Mitrić, Miodrag, Mitrović, Nebojša, "Mehanohemijska sinteza magnezijum titanata" in Zbornik apstrakata i program 58. konferencije ETRAN-a, Vrnjačka Banja, 2-5. jun 2014. (2014):46-46,
https://hdl.handle.net/21.15107/rcub_dais_634 .

TY  - JOUR
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Pavlović, Vladimir
AU  - Marković, Smilja
AU  - Mitrić, Miodrag
AU  - Mitrović, Nebojša
PY  - 2014
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/3634
AB  - The aim of this paper was mechanochemical preparation of magnesium titanates. Powder mixtures of starting oxides MgO and TiO2 were mechanically activated in a planetary ball mill for the time interval from 0 to 160 minutes. Structural, stereological, thermal characterizations were performed on produced powders. The effects of activation on morphology were investigated by scanning electron microscopy and particle size analyses, while the changes in the phase composition were determined by X-ray diffraction. It is determined that the first traces of MgTiO3 became detectable after 40 minutes of milling, while after 160 minutes the pure magnesium titanates were noticed. The differential thermal analyses and thermo gravimetric analysis, in temperatures range from 25 oC to 1100 oC, has been performed in order to investigate thermal behavior of the mixtures.
AB  - Cilj ovog rada je bio dobijanje čistog magnezijum titanata mehanohemijski, putem reakcije u čvrstom stanju. Smeša polaznih oksida MgO i TiO2 je podvrgnuta mehaničkom tretmanu u vremenskim intervalima od 0 do 160 minuta u visokoenergetskom planetarnom mlinu. Dobijeni prahovi su detaljno okarakterisani termijski, stereoloski i strukturno. Morfologija prahova je ispitana SEM analizom i praćenjem raspodele veličina čestica na laserskom analizatoru, dok su promene u faznom sastavu ispraćene snimanjem XRD. Utvrđeno je da se prvi tragovi magnezijum titanata javljaju već nakon 40 minuta aktivacije, dok je nakon 160 minuta prisutan čist magnezijum titanat. Radi određivanja karakterističnih temperatura reakcija koje se odigravaju u aktiviranim sistemima snimljeni su termogrami u temperaturnom intervalu od sobne do 1100 oC.
PB  - Savez inženjera i tehničara Srbije, Beograd
T2  - Tehnika
T1  - Synthesis of magnesium titanates by mechanochemical method
T1  - Sinteza magnezijum titanata mehanohemijskom metodom
EP  - 731
IS  - 5
SP  - 727
VL  - 69
DO  - 10.5937/tehnika1405727F
ER  - 

@article{
author = "Filipović, Suzana and Obradović, Nina and Pavlović, Vladimir and Marković, Smilja and Mitrić, Miodrag and Mitrović, Nebojša",
year = "2014",
abstract = "The aim of this paper was mechanochemical preparation of magnesium titanates. Powder mixtures of starting oxides MgO and TiO2 were mechanically activated in a planetary ball mill for the time interval from 0 to 160 minutes. Structural, stereological, thermal characterizations were performed on produced powders. The effects of activation on morphology were investigated by scanning electron microscopy and particle size analyses, while the changes in the phase composition were determined by X-ray diffraction. It is determined that the first traces of MgTiO3 became detectable after 40 minutes of milling, while after 160 minutes the pure magnesium titanates were noticed. The differential thermal analyses and thermo gravimetric analysis, in temperatures range from 25 oC to 1100 oC, has been performed in order to investigate thermal behavior of the mixtures., Cilj ovog rada je bio dobijanje čistog magnezijum titanata mehanohemijski, putem reakcije u čvrstom stanju. Smeša polaznih oksida MgO i TiO2 je podvrgnuta mehaničkom tretmanu u vremenskim intervalima od 0 do 160 minuta u visokoenergetskom planetarnom mlinu. Dobijeni prahovi su detaljno okarakterisani termijski, stereoloski i strukturno. Morfologija prahova je ispitana SEM analizom i praćenjem raspodele veličina čestica na laserskom analizatoru, dok su promene u faznom sastavu ispraćene snimanjem XRD. Utvrđeno je da se prvi tragovi magnezijum titanata javljaju već nakon 40 minuta aktivacije, dok je nakon 160 minuta prisutan čist magnezijum titanat. Radi određivanja karakterističnih temperatura reakcija koje se odigravaju u aktiviranim sistemima snimljeni su termogrami u temperaturnom intervalu od sobne do 1100 oC.",
publisher = "Savez inženjera i tehničara Srbije, Beograd",
journal = "Tehnika",
title = "Synthesis of magnesium titanates by mechanochemical method, Sinteza magnezijum titanata mehanohemijskom metodom",
pages = "731-727",
number = "5",
volume = "69",
doi = "10.5937/tehnika1405727F"
}

Filipović, S., Obradović, N., Pavlović, V., Marković, S., Mitrić, M.,& Mitrović, N.. (2014). Synthesis of magnesium titanates by mechanochemical method. in Tehnika
Savez inženjera i tehničara Srbije, Beograd., 69(5), 727-731.
https://doi.org/10.5937/tehnika1405727F

Filipović S, Obradović N, Pavlović V, Marković S, Mitrić M, Mitrović N. Synthesis of magnesium titanates by mechanochemical method. in Tehnika. 2014;69(5):727-731.
doi:10.5937/tehnika1405727F .

Filipović, Suzana, Obradović, Nina, Pavlović, Vladimir, Marković, Smilja, Mitrić, Miodrag, Mitrović, Nebojša, "Synthesis of magnesium titanates by mechanochemical method" in Tehnika, 69, no. 5 (2014):727-731,
https://doi.org/10.5937/tehnika1405727F . .

TY  - JOUR
AU  - Filipović, Suzana
AU  - Obradović, N.
AU  - Pavlović, Vladimir
AU  - Kosanović, Darko
AU  - Mitrić, M.
AU  - Mitrović, N.
AU  - Pouchly, V.
AU  - Kachlik, Martin
AU  - Maca, Karel
PY  - 2014
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/3438
AB  - In this article, the advantages of combined sintering in comparison with the conventional one, of mechanically activated magnesium titanate ceramic were investigated. The stoichiometric mixtures of MgO and TiO2 were mechano-chemically activated for 0, 10, 40, 80 and 160 minutes by ball milling and then isostatically pressed (CIP) to form green bodies. Conventional sintering was realized by heating up to 1400 degrees C and hold for 30 minutes in air atmosphere. Resulting ceramic samples with closed porosity were post-sintered by pressure assisted technique Hot Isostatic Pressing (HIP) at 1280 degrees C/3h in argon atmosphere with a pressure of 200 MPa. The best results were observed in the case of samples post-sintered by HIP, when single-phase MgTiO3 samples with relative density of 96% were prepared.
PB  - Međunarodni Institut za nauku o sinterovanju, Beograd
T2  - Science of Sintering
T1  - Advantages of Combined Sintering Compared to Conventional Sintering of Mechanically Activated Magnesium Titanate
EP  - 290
IS  - 3
SP  - 283
VL  - 46
DO  - 10.2298/SOS1403283F
ER  - 

@article{
author = "Filipović, Suzana and Obradović, N. and Pavlović, Vladimir and Kosanović, Darko and Mitrić, M. and Mitrović, N. and Pouchly, V. and Kachlik, Martin and Maca, Karel",
year = "2014",
abstract = "In this article, the advantages of combined sintering in comparison with the conventional one, of mechanically activated magnesium titanate ceramic were investigated. The stoichiometric mixtures of MgO and TiO2 were mechano-chemically activated for 0, 10, 40, 80 and 160 minutes by ball milling and then isostatically pressed (CIP) to form green bodies. Conventional sintering was realized by heating up to 1400 degrees C and hold for 30 minutes in air atmosphere. Resulting ceramic samples with closed porosity were post-sintered by pressure assisted technique Hot Isostatic Pressing (HIP) at 1280 degrees C/3h in argon atmosphere with a pressure of 200 MPa. The best results were observed in the case of samples post-sintered by HIP, when single-phase MgTiO3 samples with relative density of 96% were prepared.",
publisher = "Međunarodni Institut za nauku o sinterovanju, Beograd",
journal = "Science of Sintering",
title = "Advantages of Combined Sintering Compared to Conventional Sintering of Mechanically Activated Magnesium Titanate",
pages = "290-283",
number = "3",
volume = "46",
doi = "10.2298/SOS1403283F"
}

Filipović, S., Obradović, N., Pavlović, V., Kosanović, D., Mitrić, M., Mitrović, N., Pouchly, V., Kachlik, M.,& Maca, K.. (2014). Advantages of Combined Sintering Compared to Conventional Sintering of Mechanically Activated Magnesium Titanate. in Science of Sintering
Međunarodni Institut za nauku o sinterovanju, Beograd., 46(3), 283-290.
https://doi.org/10.2298/SOS1403283F

Filipović S, Obradović N, Pavlović V, Kosanović D, Mitrić M, Mitrović N, Pouchly V, Kachlik M, Maca K. Advantages of Combined Sintering Compared to Conventional Sintering of Mechanically Activated Magnesium Titanate. in Science of Sintering. 2014;46(3):283-290.
doi:10.2298/SOS1403283F .

Filipović, Suzana, Obradović, N., Pavlović, Vladimir, Kosanović, Darko, Mitrić, M., Mitrović, N., Pouchly, V., Kachlik, Martin, Maca, Karel, "Advantages of Combined Sintering Compared to Conventional Sintering of Mechanically Activated Magnesium Titanate" in Science of Sintering, 46, no. 3 (2014):283-290,
https://doi.org/10.2298/SOS1403283F . .

TY  - JOUR
AU  - Ribić-Zelenović, L.
AU  - Cirović, N.
AU  - Spasojević, M.
AU  - Mitrović, N.
AU  - Maricić, A.
AU  - Pavlović, Vladimir
PY  - 2012
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/2958
AB  - A nanostructured Ni-Fe-W powder was obtained by electrodeposition from ammonium citrate electrolyte within the current density range of 500-1000 mA cm(-2) at the electrolyte temperature of 50 degrees C -70 degrees C. XRD analysis shows that the powder contains an amorphous matrix having embedded nanocrystals of the FCC solid solution of iron and tungsten in nickel, with an average crystal grain size of 3.4 nm, a high internal microstrain value and a high density of chaotically distributed dislocations. EDS analysis exhibits that the chemical composition of the Ni-24%Fe-11%W powder does not depend upon current density and electrolyte temperature due to the diffusion control of the process of code-position of nickel, iron and tungsten. SEM micrographs show that the electrodeposition results in the formation of two particle shapes: large cauliflower-like particles and small dendrite particles. The cauliflower-like particles contain deep cavities at hydrogen evolution sites. Cavity density increases with increasing deposition current density. Smaller powder particles are formed at higher temperatures and at higher current densities. During the first heating, relative magnetic permeability decreases reaching the Curie temperature at about 350 degrees C and after cooling exhibits a 12% increase due to the performed relaxation process. Following the second heating to 500 degrees C, the magnetic permeability of the powder is about 5% lower than that of the as-prepared powder due to crystallization of the amorphous phase of the powder and the crystal grain growth in FCC phase.
PB  - Elsevier Science Sa, Lausanne
T2  - Materials Chemistry and Physics
T1  - Microstructural properties of electrochemically prepared Ni-Fe-W powders
EP  - 219
IS  - 1
SP  - 212
VL  - 135
DO  - 10.1016/j.matchemphys.2012.04.061
ER  - 

@article{
author = "Ribić-Zelenović, L. and Cirović, N. and Spasojević, M. and Mitrović, N. and Maricić, A. and Pavlović, Vladimir",
year = "2012",
abstract = "A nanostructured Ni-Fe-W powder was obtained by electrodeposition from ammonium citrate electrolyte within the current density range of 500-1000 mA cm(-2) at the electrolyte temperature of 50 degrees C -70 degrees C. XRD analysis shows that the powder contains an amorphous matrix having embedded nanocrystals of the FCC solid solution of iron and tungsten in nickel, with an average crystal grain size of 3.4 nm, a high internal microstrain value and a high density of chaotically distributed dislocations. EDS analysis exhibits that the chemical composition of the Ni-24%Fe-11%W powder does not depend upon current density and electrolyte temperature due to the diffusion control of the process of code-position of nickel, iron and tungsten. SEM micrographs show that the electrodeposition results in the formation of two particle shapes: large cauliflower-like particles and small dendrite particles. The cauliflower-like particles contain deep cavities at hydrogen evolution sites. Cavity density increases with increasing deposition current density. Smaller powder particles are formed at higher temperatures and at higher current densities. During the first heating, relative magnetic permeability decreases reaching the Curie temperature at about 350 degrees C and after cooling exhibits a 12% increase due to the performed relaxation process. Following the second heating to 500 degrees C, the magnetic permeability of the powder is about 5% lower than that of the as-prepared powder due to crystallization of the amorphous phase of the powder and the crystal grain growth in FCC phase.",
publisher = "Elsevier Science Sa, Lausanne",
journal = "Materials Chemistry and Physics",
title = "Microstructural properties of electrochemically prepared Ni-Fe-W powders",
pages = "219-212",
number = "1",
volume = "135",
doi = "10.1016/j.matchemphys.2012.04.061"
}

Ribić-Zelenović, L., Cirović, N., Spasojević, M., Mitrović, N., Maricić, A.,& Pavlović, V.. (2012). Microstructural properties of electrochemically prepared Ni-Fe-W powders. in Materials Chemistry and Physics
Elsevier Science Sa, Lausanne., 135(1), 212-219.
https://doi.org/10.1016/j.matchemphys.2012.04.061

Ribić-Zelenović L, Cirović N, Spasojević M, Mitrović N, Maricić A, Pavlović V. Microstructural properties of electrochemically prepared Ni-Fe-W powders. in Materials Chemistry and Physics. 2012;135(1):212-219.
doi:10.1016/j.matchemphys.2012.04.061 .

Ribić-Zelenović, L., Cirović, N., Spasojević, M., Mitrović, N., Maricić, A., Pavlović, Vladimir, "Microstructural properties of electrochemically prepared Ni-Fe-W powders" in Materials Chemistry and Physics, 135, no. 1 (2012):212-219,
https://doi.org/10.1016/j.matchemphys.2012.04.061 . .

TY  - JOUR
AU  - Obradović, N.
AU  - Filipović, Suzana
AU  - Pavlović, Vladimir
AU  - Maricić, A.
AU  - Mitrović, N.
AU  - Balac, I.
AU  - Ristić, M.M.
PY  - 2011
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/2676
AB  - In this article the influence of mechanical activation on sintering process of magnesium-titanate and barium-zinc-titanate ceramics has been investigated. Both non-activated and mixtures treated in planetary ball mill for 80 minutes were sintered at 1100 degrees C and 1300 degrees C. The influence of mechanical activation on phase composition and crystal structure has been analyzed by XRD, while the effect of activation and sintering process on microstructure was investigated by scanning electron microscopy. It has been established that temperature of 1100 degrees C was to low to induce final sintering stage for both systems. Moreover, we concluded that barium-zinc-titanate ceramics exhibited better sinterability than magnesium-titanate ceramics.
PB  - Međunarodni Institut za nauku o sinterovanju, Beograd
T2  - Science of Sintering
T1  - Sintering of Mechanically Activated Magnesium-titanate and Barium-zinc-titanate Ceramics
EP  - 151
IS  - 2
SP  - 145
VL  - 43
DO  - 10.2298/SOS1102145O
ER  - 

@article{
author = "Obradović, N. and Filipović, Suzana and Pavlović, Vladimir and Maricić, A. and Mitrović, N. and Balac, I. and Ristić, M.M.",
year = "2011",
abstract = "In this article the influence of mechanical activation on sintering process of magnesium-titanate and barium-zinc-titanate ceramics has been investigated. Both non-activated and mixtures treated in planetary ball mill for 80 minutes were sintered at 1100 degrees C and 1300 degrees C. The influence of mechanical activation on phase composition and crystal structure has been analyzed by XRD, while the effect of activation and sintering process on microstructure was investigated by scanning electron microscopy. It has been established that temperature of 1100 degrees C was to low to induce final sintering stage for both systems. Moreover, we concluded that barium-zinc-titanate ceramics exhibited better sinterability than magnesium-titanate ceramics.",
publisher = "Međunarodni Institut za nauku o sinterovanju, Beograd",
journal = "Science of Sintering",
title = "Sintering of Mechanically Activated Magnesium-titanate and Barium-zinc-titanate Ceramics",
pages = "151-145",
number = "2",
volume = "43",
doi = "10.2298/SOS1102145O"
}

Obradović, N., Filipović, S., Pavlović, V., Maricić, A., Mitrović, N., Balac, I.,& Ristić, M.M.. (2011). Sintering of Mechanically Activated Magnesium-titanate and Barium-zinc-titanate Ceramics. in Science of Sintering
Međunarodni Institut za nauku o sinterovanju, Beograd., 43(2), 145-151.
https://doi.org/10.2298/SOS1102145O

Obradović N, Filipović S, Pavlović V, Maricić A, Mitrović N, Balac I, Ristić M. Sintering of Mechanically Activated Magnesium-titanate and Barium-zinc-titanate Ceramics. in Science of Sintering. 2011;43(2):145-151.
doi:10.2298/SOS1102145O .

Obradović, N., Filipović, Suzana, Pavlović, Vladimir, Maricić, A., Mitrović, N., Balac, I., Ristić, M.M., "Sintering of Mechanically Activated Magnesium-titanate and Barium-zinc-titanate Ceramics" in Science of Sintering, 43, no. 2 (2011):145-151,
https://doi.org/10.2298/SOS1102145O . .

TY  - JOUR
AU  - Obradović, Nina
AU  - Mitrović, Nebojša
AU  - Pavlović, Vladimir
PY  - 2009
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/2055
AB  - The aim of this work was an investigation of structural and electrical properties of sintered zinc-titanate ceramics obtained by mechanical activation. Mixtures of ZnO and TiO(2) were mechanically activated in a planetary ball mill up to 90 min and sintered isothermally in air for 120 min at 1100 degrees C. The phase composition in the ZnO-TiO(2) system after milling and sintering was analyzed using the XRD method. Microstructure analyses were performed using SEM. The results of electric resistivity, capacitance and loss tangent of the sintered samples were obtained. The existence of zinc-titanate as a dielectric was proved (epsilon(r) = 12.5, Q = 386.1, tg delta = 0.0026, rho = 1.02 Omega m).
PB  - Elsevier Sci Ltd, Oxford
T2  - Ceramics International
T1  - Structural and electrical properties of sintered zinc-titanate ceramics
EP  - 37
IS  - 1
SP  - 35
VL  - 35
DO  - 10.1016/j.ceramint.2007.09.020
ER  - 

@article{
author = "Obradović, Nina and Mitrović, Nebojša and Pavlović, Vladimir",
year = "2009",
abstract = "The aim of this work was an investigation of structural and electrical properties of sintered zinc-titanate ceramics obtained by mechanical activation. Mixtures of ZnO and TiO(2) were mechanically activated in a planetary ball mill up to 90 min and sintered isothermally in air for 120 min at 1100 degrees C. The phase composition in the ZnO-TiO(2) system after milling and sintering was analyzed using the XRD method. Microstructure analyses were performed using SEM. The results of electric resistivity, capacitance and loss tangent of the sintered samples were obtained. The existence of zinc-titanate as a dielectric was proved (epsilon(r) = 12.5, Q = 386.1, tg delta = 0.0026, rho = 1.02 Omega m).",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Ceramics International",
title = "Structural and electrical properties of sintered zinc-titanate ceramics",
pages = "37-35",
number = "1",
volume = "35",
doi = "10.1016/j.ceramint.2007.09.020"
}

Obradović, N., Mitrović, N.,& Pavlović, V.. (2009). Structural and electrical properties of sintered zinc-titanate ceramics. in Ceramics International
Elsevier Sci Ltd, Oxford., 35(1), 35-37.
https://doi.org/10.1016/j.ceramint.2007.09.020

Obradović N, Mitrović N, Pavlović V. Structural and electrical properties of sintered zinc-titanate ceramics. in Ceramics International. 2009;35(1):35-37.
doi:10.1016/j.ceramint.2007.09.020 .

Obradović, Nina, Mitrović, Nebojša, Pavlović, Vladimir, "Structural and electrical properties of sintered zinc-titanate ceramics" in Ceramics International, 35, no. 1 (2009):35-37,
https://doi.org/10.1016/j.ceramint.2007.09.020 . .