Vujančević, Jelena

Link to this page

Authority KeyName Variants
0f1c701f-9a3a-450a-9fe3-785f9269d21d
  • Vujančević, Jelena (7)
Projects

Author's Bibliography

Effect of the Deposition of Vanadium-Oxide on the Photocatalytic Activity of TiO2 Nanotubes and Its Photodiode Performance Interfaced with CH3NH3PbI3 Single Crystal

Vujančević, Jelena; Andričević, Pavao; Djokić, Veljko; Blagojević, Vladimir; Pavlović, Vera P.; Ćirković, Jovana; Horváth, Endre; Forró, László; Karoui, Abdennaceur; Pavlović, Vladimir B.; Janaćković, Djordje

(2023)

TY  - JOUR
AU  - Vujančević, Jelena
AU  - Andričević, Pavao
AU  - Djokić, Veljko
AU  - Blagojević, Vladimir
AU  - Pavlović, Vera P.
AU  - Ćirković, Jovana
AU  - Horváth, Endre
AU  - Forró, László
AU  - Karoui, Abdennaceur
AU  - Pavlović, Vladimir B.
AU  - Janaćković, Djordje
PY  - 2023
UR  - https://www.mdpi.com/2073-4344/13/2/352
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/6305
AB  - In this study, we report the influence of vanadium oxide (VO), as a photosensitive component, on the photoactivity of TiO2 nanotubes (TNTs). A series of TNTs of varying tube diameter were synthesized by the anodization of titanium foils at different voltages, while vanadium oxide was deposited on TNTs by wet chemical deposition. An improvement in the optical properties of nanotubes was observed after the deposition of vanadium oxide. An improvement in the optical properties (redshift in UV-Vis spectra) of TNTs and TNT/VO was noted. The photocatalytic activity was improved with increasing tube diameter, while it was weakened after the deposition of VO. Furthermore, photoactivity was investigated in photodiodes based on TNTs or TNT/VO and single crystals of CH3NH3PbI3. The photoelectric measurement revealed that different TNT diameters did not influence the I-V characteristic of the photodiodes, while the deposition of VO improved the photocurrent for smaller TNTs.
T2  - Catalysts
T2  - Catalysts
T1  - Effect of the Deposition of Vanadium-Oxide on the Photocatalytic Activity of TiO2 Nanotubes and Its Photodiode Performance Interfaced with CH3NH3PbI3 Single Crystal
IS  - 2
SP  - 352
VL  - 13
DO  - 10.3390/catal13020352
ER  - 
@article{
author = "Vujančević, Jelena and Andričević, Pavao and Djokić, Veljko and Blagojević, Vladimir and Pavlović, Vera P. and Ćirković, Jovana and Horváth, Endre and Forró, László and Karoui, Abdennaceur and Pavlović, Vladimir B. and Janaćković, Djordje",
year = "2023",
abstract = "In this study, we report the influence of vanadium oxide (VO), as a photosensitive component, on the photoactivity of TiO2 nanotubes (TNTs). A series of TNTs of varying tube diameter were synthesized by the anodization of titanium foils at different voltages, while vanadium oxide was deposited on TNTs by wet chemical deposition. An improvement in the optical properties of nanotubes was observed after the deposition of vanadium oxide. An improvement in the optical properties (redshift in UV-Vis spectra) of TNTs and TNT/VO was noted. The photocatalytic activity was improved with increasing tube diameter, while it was weakened after the deposition of VO. Furthermore, photoactivity was investigated in photodiodes based on TNTs or TNT/VO and single crystals of CH3NH3PbI3. The photoelectric measurement revealed that different TNT diameters did not influence the I-V characteristic of the photodiodes, while the deposition of VO improved the photocurrent for smaller TNTs.",
journal = "Catalysts, Catalysts",
title = "Effect of the Deposition of Vanadium-Oxide on the Photocatalytic Activity of TiO2 Nanotubes and Its Photodiode Performance Interfaced with CH3NH3PbI3 Single Crystal",
number = "2",
pages = "352",
volume = "13",
doi = "10.3390/catal13020352"
}
Vujančević, J., Andričević, P., Djokić, V., Blagojević, V., Pavlović, V. P., Ćirković, J., Horváth, E., Forró, L., Karoui, A., Pavlović, V. B.,& Janaćković, D.. (2023). Effect of the Deposition of Vanadium-Oxide on the Photocatalytic Activity of TiO2 Nanotubes and Its Photodiode Performance Interfaced with CH3NH3PbI3 Single Crystal. in Catalysts, 13(2), 352.
https://doi.org/10.3390/catal13020352
Vujančević J, Andričević P, Djokić V, Blagojević V, Pavlović VP, Ćirković J, Horváth E, Forró L, Karoui A, Pavlović VB, Janaćković D. Effect of the Deposition of Vanadium-Oxide on the Photocatalytic Activity of TiO2 Nanotubes and Its Photodiode Performance Interfaced with CH3NH3PbI3 Single Crystal. in Catalysts. 2023;13(2):352.
doi:10.3390/catal13020352 .
Vujančević, Jelena, Andričević, Pavao, Djokić, Veljko, Blagojević, Vladimir, Pavlović, Vera P., Ćirković, Jovana, Horváth, Endre, Forró, László, Karoui, Abdennaceur, Pavlović, Vladimir B., Janaćković, Djordje, "Effect of the Deposition of Vanadium-Oxide on the Photocatalytic Activity of TiO2 Nanotubes and Its Photodiode Performance Interfaced with CH3NH3PbI3 Single Crystal" in Catalysts, 13, no. 2 (2023):352,
https://doi.org/10.3390/catal13020352 . .

ToF-ERDA/RBS analysis of annealed TiO2 nanotubes grown onto FTO glass

Vujančević, Jelena; Bjelajac, Anđelika; Provatas, Georgios; Siketić, Zdravko; Jakšić, Milko; Pavlović, Vladimir; Janaćković, Đorđe

(Novi Sad : Faculty of Technology, 2019)

TY  - CONF
AU  - Vujančević, Jelena
AU  - Bjelajac, Anđelika
AU  - Provatas, Georgios
AU  - Siketić, Zdravko
AU  - Jakšić, Milko
AU  - Pavlović, Vladimir
AU  - Janaćković, Đorđe
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/6985
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5749
AB  - Different semiconductors have been studied as photoanode material for solar cells. Among them, TiO2 has been shown to be the best material due to its chemical stability and good charge transport capability. It is usually deposited onto FTO glass (F-SnO2), and then heated at high temperature in order to obtain inter-crystalline electric contact for improving electron conductivity. The focus of this research was chemical analysis of the TiO2 nanotubes (NTs) obtained by anodization of titanium film on FTO glass using NH4F in ethylene glycol electrolyte. There are only few studies suggesting that the electrolyte is a source of N dopant in TiO2, but also Sn diffusion from FTO support was reported. This study aims to show the chemical distribution of elements of interest along the nanotubes depth. For that purpose the time-of-flight elastic recoil detection analysis (ToF-ERDA) and Rutherford backscattering (RBS) methods were used as complementary techniques for chemical analysis of both light, such is N, and heavy elements, such is Sn. The TiO2 NTs films were annealed at different temperatures (450– 630 °C) and the impact of the heating temperature on the chemical distribution was followed.
PB  - Novi Sad : Faculty of Technology
C3  - Programme and book of abstracts / 13th Conference for Young Scientists in Ceramics (CYSC-2017), October 16-19, 2019, Novi Sad
T1  - ToF-ERDA/RBS analysis of annealed TiO2 nanotubes grown onto FTO glass
EP  - 132
SP  - 132
UR  - https://hdl.handle.net/21.15107/rcub_dais_6985
ER  - 
@conference{
author = "Vujančević, Jelena and Bjelajac, Anđelika and Provatas, Georgios and Siketić, Zdravko and Jakšić, Milko and Pavlović, Vladimir and Janaćković, Đorđe",
year = "2019",
abstract = "Different semiconductors have been studied as photoanode material for solar cells. Among them, TiO2 has been shown to be the best material due to its chemical stability and good charge transport capability. It is usually deposited onto FTO glass (F-SnO2), and then heated at high temperature in order to obtain inter-crystalline electric contact for improving electron conductivity. The focus of this research was chemical analysis of the TiO2 nanotubes (NTs) obtained by anodization of titanium film on FTO glass using NH4F in ethylene glycol electrolyte. There are only few studies suggesting that the electrolyte is a source of N dopant in TiO2, but also Sn diffusion from FTO support was reported. This study aims to show the chemical distribution of elements of interest along the nanotubes depth. For that purpose the time-of-flight elastic recoil detection analysis (ToF-ERDA) and Rutherford backscattering (RBS) methods were used as complementary techniques for chemical analysis of both light, such is N, and heavy elements, such is Sn. The TiO2 NTs films were annealed at different temperatures (450– 630 °C) and the impact of the heating temperature on the chemical distribution was followed.",
publisher = "Novi Sad : Faculty of Technology",
journal = "Programme and book of abstracts / 13th Conference for Young Scientists in Ceramics (CYSC-2017), October 16-19, 2019, Novi Sad",
title = "ToF-ERDA/RBS analysis of annealed TiO2 nanotubes grown onto FTO glass",
pages = "132-132",
url = "https://hdl.handle.net/21.15107/rcub_dais_6985"
}
Vujančević, J., Bjelajac, A., Provatas, G., Siketić, Z., Jakšić, M., Pavlović, V.,& Janaćković, Đ.. (2019). ToF-ERDA/RBS analysis of annealed TiO2 nanotubes grown onto FTO glass. in Programme and book of abstracts / 13th Conference for Young Scientists in Ceramics (CYSC-2017), October 16-19, 2019, Novi Sad
Novi Sad : Faculty of Technology., 132-132.
https://hdl.handle.net/21.15107/rcub_dais_6985
Vujančević J, Bjelajac A, Provatas G, Siketić Z, Jakšić M, Pavlović V, Janaćković Đ. ToF-ERDA/RBS analysis of annealed TiO2 nanotubes grown onto FTO glass. in Programme and book of abstracts / 13th Conference for Young Scientists in Ceramics (CYSC-2017), October 16-19, 2019, Novi Sad. 2019;:132-132.
https://hdl.handle.net/21.15107/rcub_dais_6985 .
Vujančević, Jelena, Bjelajac, Anđelika, Provatas, Georgios, Siketić, Zdravko, Jakšić, Milko, Pavlović, Vladimir, Janaćković, Đorđe, "ToF-ERDA/RBS analysis of annealed TiO2 nanotubes grown onto FTO glass" in Programme and book of abstracts / 13th Conference for Young Scientists in Ceramics (CYSC-2017), October 16-19, 2019, Novi Sad (2019):132-132,
https://hdl.handle.net/21.15107/rcub_dais_6985 .

Customizing nanotubular titania for photocatalytic activity

Vujančević, Jelena; Bjelajac, Anđelika; Ćirković, Jovana; Pavlović, Vera P.; Horváth, Endre; Forró, László; Janaćković, Đorđe; Pavlović, Vladimir B.

(Belgrade : Institute of Technical Sciences of SASA, 2018)

TY  - CONF
AU  - Vujančević, Jelena
AU  - Bjelajac, Anđelika
AU  - Ćirković, Jovana
AU  - Pavlović, Vera P.
AU  - Horváth, Endre
AU  - Forró, László
AU  - Janaćković, Đorđe
AU  - Pavlović, Vladimir B.
PY  - 2018
UR  - http://dais.sanu.ac.rs/123456789/4722
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5735
AB  - Semiconductor TiO2 photocatalysis is a heterogeneous catalysis, where the photons of the sun or artificial light source are activating the catalyst that enters in reactions. The targeted real-world applications are in environmental protection and remediation such as wastewater treatment, air purification and decomposition of harmful organic pollutants. In this talk, I present the synthesis of nanotubular, thin TiO2 coatings with altered morphology and crystallinity made by anodization technique. The influence of the anodization parameters and post-synthesis annealing conditions on the photocatalytic methyl orange dye decomposition was assessed. Different morphology, crystallinity and introducing a dopant into lattice increase electron transport and electron lifetime which further improve photocatalytic activity.
PB  - Belgrade : Institute of Technical Sciences of SASA
C3  - Program and the Book of Abstracts / Seventeenth Young Researchers' Conference Materials Sciences and Engineering, December 5-7, 2018, Belgrade, Serbia
T1  - Customizing nanotubular titania for photocatalytic activity
EP  - 77
SP  - 77
UR  - https://hdl.handle.net/21.15107/rcub_dais_4722
ER  - 
@conference{
author = "Vujančević, Jelena and Bjelajac, Anđelika and Ćirković, Jovana and Pavlović, Vera P. and Horváth, Endre and Forró, László and Janaćković, Đorđe and Pavlović, Vladimir B.",
year = "2018",
abstract = "Semiconductor TiO2 photocatalysis is a heterogeneous catalysis, where the photons of the sun or artificial light source are activating the catalyst that enters in reactions. The targeted real-world applications are in environmental protection and remediation such as wastewater treatment, air purification and decomposition of harmful organic pollutants. In this talk, I present the synthesis of nanotubular, thin TiO2 coatings with altered morphology and crystallinity made by anodization technique. The influence of the anodization parameters and post-synthesis annealing conditions on the photocatalytic methyl orange dye decomposition was assessed. Different morphology, crystallinity and introducing a dopant into lattice increase electron transport and electron lifetime which further improve photocatalytic activity.",
publisher = "Belgrade : Institute of Technical Sciences of SASA",
journal = "Program and the Book of Abstracts / Seventeenth Young Researchers' Conference Materials Sciences and Engineering, December 5-7, 2018, Belgrade, Serbia",
title = "Customizing nanotubular titania for photocatalytic activity",
pages = "77-77",
url = "https://hdl.handle.net/21.15107/rcub_dais_4722"
}
Vujančević, J., Bjelajac, A., Ćirković, J., Pavlović, V. P., Horváth, E., Forró, L., Janaćković, Đ.,& Pavlović, V. B.. (2018). Customizing nanotubular titania for photocatalytic activity. in Program and the Book of Abstracts / Seventeenth Young Researchers' Conference Materials Sciences and Engineering, December 5-7, 2018, Belgrade, Serbia
Belgrade : Institute of Technical Sciences of SASA., 77-77.
https://hdl.handle.net/21.15107/rcub_dais_4722
Vujančević J, Bjelajac A, Ćirković J, Pavlović VP, Horváth E, Forró L, Janaćković Đ, Pavlović VB. Customizing nanotubular titania for photocatalytic activity. in Program and the Book of Abstracts / Seventeenth Young Researchers' Conference Materials Sciences and Engineering, December 5-7, 2018, Belgrade, Serbia. 2018;:77-77.
https://hdl.handle.net/21.15107/rcub_dais_4722 .
Vujančević, Jelena, Bjelajac, Anđelika, Ćirković, Jovana, Pavlović, Vera P., Horváth, Endre, Forró, László, Janaćković, Đorđe, Pavlović, Vladimir B., "Customizing nanotubular titania for photocatalytic activity" in Program and the Book of Abstracts / Seventeenth Young Researchers' Conference Materials Sciences and Engineering, December 5-7, 2018, Belgrade, Serbia (2018):77-77,
https://hdl.handle.net/21.15107/rcub_dais_4722 .

Fabrication and applications of multifunctional nanostructured TiO2

Vujančević, Jelena; Bjelajac, Anđelika; Pavlović, Vera P.; Vlahović, Branislav; Janaćković, Đorđe; Pavlović, Vladimir B.

(Belgrade : Faculty of Agriculture, Department for Agricultural Engineering, 2017)

TY  - CONF
AU  - Vujančević, Jelena
AU  - Bjelajac, Anđelika
AU  - Pavlović, Vera P.
AU  - Vlahović, Branislav
AU  - Janaćković, Đorđe
AU  - Pavlović, Vladimir B.
PY  - 2017
UR  - http://dais.sanu.ac.rs/123456789/5141
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5739
AB  - Nanomaterials development is a rapidly emerging field of research with enormous potential for societal and economic benefits. In agro and food industries dimension-dependent properties or phenomena of nanomaterials may be used for various functional effects such as increased bioavailability or decreased toxicity of products, better detection of pathogens, improved food packaging materials, or improved delivery of nutrients. Since these effects may derive from altered or unique characteristics of materials in the nanoscale range that are not normally observed or expected in larger-scale materials with the same chemical composition, such changes raise questions about the safety, effectiveness, performance, quality or public health impact of nanotechnology products. In this article, we have reviewed the fabrication, properties, and selected applications of nanostructured TiO2 based materials. Special attention has been paid to TiO2 nanoparticles and nanotubes fabrication perspectives and applications in agriculture. We have shown that high photocatalytic disinfection and photobiological effects of nanostructured TiO2 coupled with its low price, nontoxicity, and stable performance especially provide new approaches for solving environmental pollution and pesticide residue problems in agriculture.
PB  - Belgrade : Faculty of Agriculture, Department for Agricultural Engineering
C3  - Book of Abstracts / The Third International Symposium on Agricultural Engineering, ISAE-2017, 20th-21st October 2017, Belgrade - Zemun, Serbia
T1  - Fabrication and applications of multifunctional nanostructured TiO2
EP  - 44
EP  - 
EP  - 
SP  - 44
UR  - https://hdl.handle.net/21.15107/rcub_dais_5141
ER  - 
@conference{
author = "Vujančević, Jelena and Bjelajac, Anđelika and Pavlović, Vera P. and Vlahović, Branislav and Janaćković, Đorđe and Pavlović, Vladimir B.",
year = "2017",
abstract = "Nanomaterials development is a rapidly emerging field of research with enormous potential for societal and economic benefits. In agro and food industries dimension-dependent properties or phenomena of nanomaterials may be used for various functional effects such as increased bioavailability or decreased toxicity of products, better detection of pathogens, improved food packaging materials, or improved delivery of nutrients. Since these effects may derive from altered or unique characteristics of materials in the nanoscale range that are not normally observed or expected in larger-scale materials with the same chemical composition, such changes raise questions about the safety, effectiveness, performance, quality or public health impact of nanotechnology products. In this article, we have reviewed the fabrication, properties, and selected applications of nanostructured TiO2 based materials. Special attention has been paid to TiO2 nanoparticles and nanotubes fabrication perspectives and applications in agriculture. We have shown that high photocatalytic disinfection and photobiological effects of nanostructured TiO2 coupled with its low price, nontoxicity, and stable performance especially provide new approaches for solving environmental pollution and pesticide residue problems in agriculture.",
publisher = "Belgrade : Faculty of Agriculture, Department for Agricultural Engineering",
journal = "Book of Abstracts / The Third International Symposium on Agricultural Engineering, ISAE-2017, 20th-21st October 2017, Belgrade - Zemun, Serbia",
title = "Fabrication and applications of multifunctional nanostructured TiO2",
pages = "44---44",
url = "https://hdl.handle.net/21.15107/rcub_dais_5141"
}
Vujančević, J., Bjelajac, A., Pavlović, V. P., Vlahović, B., Janaćković, Đ.,& Pavlović, V. B.. (2017). Fabrication and applications of multifunctional nanostructured TiO2. in Book of Abstracts / The Third International Symposium on Agricultural Engineering, ISAE-2017, 20th-21st October 2017, Belgrade - Zemun, Serbia
Belgrade : Faculty of Agriculture, Department for Agricultural Engineering., 44-44.
https://hdl.handle.net/21.15107/rcub_dais_5141
Vujančević J, Bjelajac A, Pavlović VP, Vlahović B, Janaćković Đ, Pavlović VB. Fabrication and applications of multifunctional nanostructured TiO2. in Book of Abstracts / The Third International Symposium on Agricultural Engineering, ISAE-2017, 20th-21st October 2017, Belgrade - Zemun, Serbia. 2017;:44-44.
https://hdl.handle.net/21.15107/rcub_dais_5141 .
Vujančević, Jelena, Bjelajac, Anđelika, Pavlović, Vera P., Vlahović, Branislav, Janaćković, Đorđe, Pavlović, Vladimir B., "Fabrication and applications of multifunctional nanostructured TiO2" in Book of Abstracts / The Third International Symposium on Agricultural Engineering, ISAE-2017, 20th-21st October 2017, Belgrade - Zemun, Serbia (2017):44-44,
https://hdl.handle.net/21.15107/rcub_dais_5141 .

Fabrication and applications of multifunctional nanostructured TiO2

Vujančević, Jelena; Bjelajac, Anđelika; Pavlović, Vera P.; Vlahović, Branislav; Janaćković, Đorđe; Pavlović, Vladimir

(Belgrade : Faculty of Agriculture, Department for Agricultural Engineering, 2017)

TY  - CONF
AU  - Vujančević, Jelena
AU  - Bjelajac, Anđelika
AU  - Pavlović, Vera P.
AU  - Vlahović, Branislav
AU  - Janaćković, Đorđe
AU  - Pavlović, Vladimir
PY  - 2017
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5762
AB  - Nanomaterials development is a rapidly emerging field of research with enormous potential for societal and economic benefits. In agro and food industries dimension-dependent properties or phenomena of nanomaterials may be used for various functional effects such as increased bioavailability or decreased toxicity of products, better detection of pathogens, improved food packaging materials, or improved delivery of nutrients. Since these effects may derive from altered or unique characteristics of materials in the nanoscale range that are not normally observed or expected in larger-scale materials with the same chemical composition, such changes raise questions about the safety, effectiveness, performance, quality or public health impact of nanotechnology products. In this article, we have reviewed the fabrication, properties, and selected applications of nanostructured TiO2 based materials. Special attention has been paid to TiO2 nanoparticles and nanotubes fabrication perspectives and applications in agriculture. We have shown that high photocatalytic disinfection and photobiological effects of nanostructured TiO2 coupled with its low price, nontoxicity, and stable performance especially provide new approaches for solving environmental pollution and pesticide residue problems in agriculture.
PB  - Belgrade : Faculty of Agriculture, Department for Agricultural Engineering
C3  - Book of Abstracts / The Third International Symposium on Agricultural Engineering, ISAE-2017, 20th-21st October 2017, Belgrade - Zemun, Serbia
T1  - Fabrication and applications of multifunctional nanostructured TiO2
EP  - 44
SP  - 44
UR  - https://hdl.handle.net/21.15107/rcub_dais_5141
ER  - 
@conference{
author = "Vujančević, Jelena and Bjelajac, Anđelika and Pavlović, Vera P. and Vlahović, Branislav and Janaćković, Đorđe and Pavlović, Vladimir",
year = "2017",
abstract = "Nanomaterials development is a rapidly emerging field of research with enormous potential for societal and economic benefits. In agro and food industries dimension-dependent properties or phenomena of nanomaterials may be used for various functional effects such as increased bioavailability or decreased toxicity of products, better detection of pathogens, improved food packaging materials, or improved delivery of nutrients. Since these effects may derive from altered or unique characteristics of materials in the nanoscale range that are not normally observed or expected in larger-scale materials with the same chemical composition, such changes raise questions about the safety, effectiveness, performance, quality or public health impact of nanotechnology products. In this article, we have reviewed the fabrication, properties, and selected applications of nanostructured TiO2 based materials. Special attention has been paid to TiO2 nanoparticles and nanotubes fabrication perspectives and applications in agriculture. We have shown that high photocatalytic disinfection and photobiological effects of nanostructured TiO2 coupled with its low price, nontoxicity, and stable performance especially provide new approaches for solving environmental pollution and pesticide residue problems in agriculture.",
publisher = "Belgrade : Faculty of Agriculture, Department for Agricultural Engineering",
journal = "Book of Abstracts / The Third International Symposium on Agricultural Engineering, ISAE-2017, 20th-21st October 2017, Belgrade - Zemun, Serbia",
title = "Fabrication and applications of multifunctional nanostructured TiO2",
pages = "44-44",
url = "https://hdl.handle.net/21.15107/rcub_dais_5141"
}
Vujančević, J., Bjelajac, A., Pavlović, V. P., Vlahović, B., Janaćković, Đ.,& Pavlović, V.. (2017). Fabrication and applications of multifunctional nanostructured TiO2. in Book of Abstracts / The Third International Symposium on Agricultural Engineering, ISAE-2017, 20th-21st October 2017, Belgrade - Zemun, Serbia
Belgrade : Faculty of Agriculture, Department for Agricultural Engineering., 44-44.
https://hdl.handle.net/21.15107/rcub_dais_5141
Vujančević J, Bjelajac A, Pavlović VP, Vlahović B, Janaćković Đ, Pavlović V. Fabrication and applications of multifunctional nanostructured TiO2. in Book of Abstracts / The Third International Symposium on Agricultural Engineering, ISAE-2017, 20th-21st October 2017, Belgrade - Zemun, Serbia. 2017;:44-44.
https://hdl.handle.net/21.15107/rcub_dais_5141 .
Vujančević, Jelena, Bjelajac, Anđelika, Pavlović, Vera P., Vlahović, Branislav, Janaćković, Đorđe, Pavlović, Vladimir, "Fabrication and applications of multifunctional nanostructured TiO2" in Book of Abstracts / The Third International Symposium on Agricultural Engineering, ISAE-2017, 20th-21st October 2017, Belgrade - Zemun, Serbia (2017):44-44,
https://hdl.handle.net/21.15107/rcub_dais_5141 .

Influence of Synthesis Parameters on Structure of 1-D TiO2 nanostructures

Vujančević, Jelena; Bjelajac, Anđelika; Obradović, Nina; Pavlović, Vera P.; Mitrić, Miodrag; Janaćković, Đorđe; Rašić, Goran; Vlahović, Branislav; Pavlović, Vladimir B.

(Belgrade : Serbian Ceramic Society, 2015)

TY  - CONF
AU  - Vujančević, Jelena
AU  - Bjelajac, Anđelika
AU  - Obradović, Nina
AU  - Pavlović, Vera P.
AU  - Mitrić, Miodrag
AU  - Janaćković, Đorđe
AU  - Rašić, Goran
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2015
UR  - http://dais.sanu.ac.rs/123456789/764
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5710
AB  - The influence of electrochemical conditions and the heat treatment on the crystal structure and the microstructure evolution of TiO2 based nanotubes synthesized by the self-ordering anodization process is investigated in this work. The electrochemical anodization was performed at room temperature, for 30 minutes under 15, 20 and 25 V, with stirring. The as-anodized Ti foils were annealed in air at 450, 600, 650 and 700 °C for 30 minutes. The structure and the lattice dynamics of the samples has been studied by using XRD and Raman spectroscopy methods. The microstructure development of the 1-D TiO2 nanostructures has been analyzed by FESEM.
PB  - Belgrade : Serbian Ceramic Society
C3  - Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / IV Serbian Ceramic Society Conference, Belgrade, 21-23. September 2015
T1  - Influence of Synthesis Parameters on Structure of 1-D TiO2 nanostructures
EP  - 81
SP  - 81
UR  - https://hdl.handle.net/21.15107/rcub_dais_764
ER  - 
@conference{
author = "Vujančević, Jelena and Bjelajac, Anđelika and Obradović, Nina and Pavlović, Vera P. and Mitrić, Miodrag and Janaćković, Đorđe and Rašić, Goran and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2015",
abstract = "The influence of electrochemical conditions and the heat treatment on the crystal structure and the microstructure evolution of TiO2 based nanotubes synthesized by the self-ordering anodization process is investigated in this work. The electrochemical anodization was performed at room temperature, for 30 minutes under 15, 20 and 25 V, with stirring. The as-anodized Ti foils were annealed in air at 450, 600, 650 and 700 °C for 30 minutes. The structure and the lattice dynamics of the samples has been studied by using XRD and Raman spectroscopy methods. The microstructure development of the 1-D TiO2 nanostructures has been analyzed by FESEM.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / IV Serbian Ceramic Society Conference, Belgrade, 21-23. September 2015",
title = "Influence of Synthesis Parameters on Structure of 1-D TiO2 nanostructures",
pages = "81-81",
url = "https://hdl.handle.net/21.15107/rcub_dais_764"
}
Vujančević, J., Bjelajac, A., Obradović, N., Pavlović, V. P., Mitrić, M., Janaćković, Đ., Rašić, G., Vlahović, B.,& Pavlović, V. B.. (2015). Influence of Synthesis Parameters on Structure of 1-D TiO2 nanostructures. in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / IV Serbian Ceramic Society Conference, Belgrade, 21-23. September 2015
Belgrade : Serbian Ceramic Society., 81-81.
https://hdl.handle.net/21.15107/rcub_dais_764
Vujančević J, Bjelajac A, Obradović N, Pavlović VP, Mitrić M, Janaćković Đ, Rašić G, Vlahović B, Pavlović VB. Influence of Synthesis Parameters on Structure of 1-D TiO2 nanostructures. in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / IV Serbian Ceramic Society Conference, Belgrade, 21-23. September 2015. 2015;:81-81.
https://hdl.handle.net/21.15107/rcub_dais_764 .
Vujančević, Jelena, Bjelajac, Anđelika, Obradović, Nina, Pavlović, Vera P., Mitrić, Miodrag, Janaćković, Đorđe, Rašić, Goran, Vlahović, Branislav, Pavlović, Vladimir B., "Influence of Synthesis Parameters on Structure of 1-D TiO2 nanostructures" in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / IV Serbian Ceramic Society Conference, Belgrade, 21-23. September 2015 (2015):81-81,
https://hdl.handle.net/21.15107/rcub_dais_764 .

Tailoring self-ordering TiO2 nanotube arrays by oxidative anodization

Vujančević, Jelena; Đokić, Veljko; Bjelajac, Anđelika; Pavlović, Vera P.; Mitrić, Miodrag; Janaćković, Đorđe; Pavlović, Vladimir B.

(Belgrade : Institute of Technical Sciences of SASA, 2015)

TY  - CONF
AU  - Vujančević, Jelena
AU  - Đokić, Veljko
AU  - Bjelajac, Anđelika
AU  - Pavlović, Vera P.
AU  - Mitrić, Miodrag
AU  - Janaćković, Đorđe
AU  - Pavlović, Vladimir B.
PY  - 2015
UR  - http://dais.sanu.ac.rs/123456789/841
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5712
AB  - Having in mind that anodic oxidation method can be used for tailoring desired structure and morphology of TiO2, herein the synthesis of self-ordered TiO2 nanotubes via electrochemical anodization of high purity Ti foil is reported. The influence of synthesis parameters such as oxidative voltage, different electrolyte, annealing temperature and annealing atmosphere were explored and correlate with obtained TiO2 nanotube arrays. The results show that applied potential is the main factor that controls the diameter of the nanotubes, while annealing temperature influence on crystal type and morphology is related to different contents of electrolyte. Investigated method gives opportunity to enhanced performance of TiO2 nanotubes, providing many applications in different field.
PB  - Belgrade : Institute of Technical Sciences of SASA
C3  - Program and the Book of Abstracts / Fourteenth Young Researchers' Conference Materials Sciences and Engineering, December 9-11, 2015, Belgrade, Serbia
T1  - Tailoring self-ordering TiO2 nanotube arrays by oxidative anodization
EP  - 18
SP  - 18
UR  - https://hdl.handle.net/21.15107/rcub_dais_841
ER  - 
@conference{
author = "Vujančević, Jelena and Đokić, Veljko and Bjelajac, Anđelika and Pavlović, Vera P. and Mitrić, Miodrag and Janaćković, Đorđe and Pavlović, Vladimir B.",
year = "2015",
abstract = "Having in mind that anodic oxidation method can be used for tailoring desired structure and morphology of TiO2, herein the synthesis of self-ordered TiO2 nanotubes via electrochemical anodization of high purity Ti foil is reported. The influence of synthesis parameters such as oxidative voltage, different electrolyte, annealing temperature and annealing atmosphere were explored and correlate with obtained TiO2 nanotube arrays. The results show that applied potential is the main factor that controls the diameter of the nanotubes, while annealing temperature influence on crystal type and morphology is related to different contents of electrolyte. Investigated method gives opportunity to enhanced performance of TiO2 nanotubes, providing many applications in different field.",
publisher = "Belgrade : Institute of Technical Sciences of SASA",
journal = "Program and the Book of Abstracts / Fourteenth Young Researchers' Conference Materials Sciences and Engineering, December 9-11, 2015, Belgrade, Serbia",
title = "Tailoring self-ordering TiO2 nanotube arrays by oxidative anodization",
pages = "18-18",
url = "https://hdl.handle.net/21.15107/rcub_dais_841"
}
Vujančević, J., Đokić, V., Bjelajac, A., Pavlović, V. P., Mitrić, M., Janaćković, Đ.,& Pavlović, V. B.. (2015). Tailoring self-ordering TiO2 nanotube arrays by oxidative anodization. in Program and the Book of Abstracts / Fourteenth Young Researchers' Conference Materials Sciences and Engineering, December 9-11, 2015, Belgrade, Serbia
Belgrade : Institute of Technical Sciences of SASA., 18-18.
https://hdl.handle.net/21.15107/rcub_dais_841
Vujančević J, Đokić V, Bjelajac A, Pavlović VP, Mitrić M, Janaćković Đ, Pavlović VB. Tailoring self-ordering TiO2 nanotube arrays by oxidative anodization. in Program and the Book of Abstracts / Fourteenth Young Researchers' Conference Materials Sciences and Engineering, December 9-11, 2015, Belgrade, Serbia. 2015;:18-18.
https://hdl.handle.net/21.15107/rcub_dais_841 .
Vujančević, Jelena, Đokić, Veljko, Bjelajac, Anđelika, Pavlović, Vera P., Mitrić, Miodrag, Janaćković, Đorđe, Pavlović, Vladimir B., "Tailoring self-ordering TiO2 nanotube arrays by oxidative anodization" in Program and the Book of Abstracts / Fourteenth Young Researchers' Conference Materials Sciences and Engineering, December 9-11, 2015, Belgrade, Serbia (2015):18-18,
https://hdl.handle.net/21.15107/rcub_dais_841 .