TY  - JOUR
AU  - Mrdak, Mihailo
AU  - Lačnjevac, Časlav
AU  - Rakin, Marko
AU  - Janaćković, Đorđe
AU  - Veljić, Darko
AU  - Bajić, Darko
PY  - 2021
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5913
AB  - In this paper, analyzed are the effects of the plasma spray distance on the microstructure and mechanical properties of the NiCrAlCoY2O3 coating layers deposited at atmospheric pressure. The microstructure and mechanical properties of the coating layers are under the influence of the interaction of plasma particles (ions and electrons) with powder particles, providing the transfer of velocity and temperature of the plasma particles onto the powder particles. The effect of the interaction is directly dependent on the time the powder particles were present in the plasma which is defined by distance of the plasma gun from the substrate, depending on the granulation of the powder, the melting point and specific gravity. In order to obtain homogeneous and denser coating layers with high adhesion, in the experiment three distances from the substrate were used: 95 mm, 105 mm and 115 mm. The layers were deposited on thin sheets of AlMg1 aluminum thickness of 0.6 mm. Evaluation of mechanical properties of the layers was carried out by examining microhardness using the HV0.1 method and the bond strength by tensile testing. The morphology of the powder particles was examined on the SEM, while the microstructure of the layers was evaluated under a light microscope in accordance with the Pratt Whitney standard. The results of the experiment showed that the distance from the substrate substantially influenced the structure and mechanical properties of the coating layers. The best deposited layers were examined in the system with the ZrO224%MgO ceramic coating, which have proved to be reliable protectionfrom high temperature and abrasive rocket jet fuel.
PB  - Engineers Society for Corrosion
T2  - Materials Protection
T1  - [Characterization of deposited plasma spray nicralcoy2o3 coating layers on almg1 alloy substrates] [Karakterizacija deponovanih slojeva plazma sprej prevlake nicralcoy2o3 na podlogama od legure almg1]
EP  - 40
IS  - 1
SP  - 34
VL  - 2021
DO  - 10.5937/zasmat2101034M
ER  - 

@article{
author = "Mrdak, Mihailo and Lačnjevac, Časlav and Rakin, Marko and Janaćković, Đorđe and Veljić, Darko and Bajić, Darko",
year = "2021",
abstract = "In this paper, analyzed are the effects of the plasma spray distance on the microstructure and mechanical properties of the NiCrAlCoY2O3 coating layers deposited at atmospheric pressure. The microstructure and mechanical properties of the coating layers are under the influence of the interaction of plasma particles (ions and electrons) with powder particles, providing the transfer of velocity and temperature of the plasma particles onto the powder particles. The effect of the interaction is directly dependent on the time the powder particles were present in the plasma which is defined by distance of the plasma gun from the substrate, depending on the granulation of the powder, the melting point and specific gravity. In order to obtain homogeneous and denser coating layers with high adhesion, in the experiment three distances from the substrate were used: 95 mm, 105 mm and 115 mm. The layers were deposited on thin sheets of AlMg1 aluminum thickness of 0.6 mm. Evaluation of mechanical properties of the layers was carried out by examining microhardness using the HV0.1 method and the bond strength by tensile testing. The morphology of the powder particles was examined on the SEM, while the microstructure of the layers was evaluated under a light microscope in accordance with the Pratt Whitney standard. The results of the experiment showed that the distance from the substrate substantially influenced the structure and mechanical properties of the coating layers. The best deposited layers were examined in the system with the ZrO224%MgO ceramic coating, which have proved to be reliable protectionfrom high temperature and abrasive rocket jet fuel.",
publisher = "Engineers Society for Corrosion",
journal = "Materials Protection",
title = "[Characterization of deposited plasma spray nicralcoy2o3 coating layers on almg1 alloy substrates] [Karakterizacija deponovanih slojeva plazma sprej prevlake nicralcoy2o3 na podlogama od legure almg1]",
pages = "40-34",
number = "1",
volume = "2021",
doi = "10.5937/zasmat2101034M"
}

Mrdak, M., Lačnjevac, Č., Rakin, M., Janaćković, Đ., Veljić, D.,& Bajić, D.. (2021). [Characterization of deposited plasma spray nicralcoy2o3 coating layers on almg1 alloy substrates] [Karakterizacija deponovanih slojeva plazma sprej prevlake nicralcoy2o3 na podlogama od legure almg1]. in Materials Protection
Engineers Society for Corrosion., 2021(1), 34-40.
https://doi.org/10.5937/zasmat2101034M

Mrdak M, Lačnjevac Č, Rakin M, Janaćković Đ, Veljić D, Bajić D. [Characterization of deposited plasma spray nicralcoy2o3 coating layers on almg1 alloy substrates] [Karakterizacija deponovanih slojeva plazma sprej prevlake nicralcoy2o3 na podlogama od legure almg1]. in Materials Protection. 2021;2021(1):34-40.
doi:10.5937/zasmat2101034M .

Mrdak, Mihailo, Lačnjevac, Časlav, Rakin, Marko, Janaćković, Đorđe, Veljić, Darko, Bajić, Darko, "[Characterization of deposited plasma spray nicralcoy2o3 coating layers on almg1 alloy substrates] [Karakterizacija deponovanih slojeva plazma sprej prevlake nicralcoy2o3 na podlogama od legure almg1]" in Materials Protection, 2021, no. 1 (2021):34-40,
https://doi.org/10.5937/zasmat2101034M . .

TY  - JOUR
AU  - Mrdak, Mihailo
AU  - Lačnjevac, Časlav
AU  - Rakin, Marko
AU  - Janaćković, Đorđe
AU  - Veljić, Darko
AU  - Bajić, Darko
PY  - 2021
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/6035
AB  - The aim of this study was to deposit multi-functional ZrO28%Y2O3 coating layers using the plasma spray technology and then to characterise such layers. In combination with other biomedical ceramics, this coating is intended for the application in implant surface modification. The examination was focused on the mechanical properties and microstructure layers. Using the atmospheric plasma spraying, duplex ZrO28%Y2O3/Ni22Cr10Al1Y coating system was deposited on the X15Cr13 stainless steel, with two different thicknesses of the bond and ceramic coatings. The microstructure was analysed using an optical microscope, including the assessment of the content of micropores. The morphology of powder particles and ceramic coating surfaces were examined on a scanning electron microscope (SEM). The quality of the ZrO28%Y2O3 layers makes them suitable for the application and combination with other materials to create a system of biomedical or multifunctional coatings.
PB  - Engineers Society for Corrosion
T2  - Materials Protection
T1  - Characterisation of biocompatible layers of ZrO28%Y2O used in combination with other ceramics to modify the surface of implants
EP  - 268
IS  - 4
SP  - 262
VL  - 62
DO  - 10.5937/zasmat2104262M
ER  - 

@article{
author = "Mrdak, Mihailo and Lačnjevac, Časlav and Rakin, Marko and Janaćković, Đorđe and Veljić, Darko and Bajić, Darko",
year = "2021",
abstract = "The aim of this study was to deposit multi-functional ZrO28%Y2O3 coating layers using the plasma spray technology and then to characterise such layers. In combination with other biomedical ceramics, this coating is intended for the application in implant surface modification. The examination was focused on the mechanical properties and microstructure layers. Using the atmospheric plasma spraying, duplex ZrO28%Y2O3/Ni22Cr10Al1Y coating system was deposited on the X15Cr13 stainless steel, with two different thicknesses of the bond and ceramic coatings. The microstructure was analysed using an optical microscope, including the assessment of the content of micropores. The morphology of powder particles and ceramic coating surfaces were examined on a scanning electron microscope (SEM). The quality of the ZrO28%Y2O3 layers makes them suitable for the application and combination with other materials to create a system of biomedical or multifunctional coatings.",
publisher = "Engineers Society for Corrosion",
journal = "Materials Protection",
title = "Characterisation of biocompatible layers of ZrO28%Y2O used in combination with other ceramics to modify the surface of implants",
pages = "268-262",
number = "4",
volume = "62",
doi = "10.5937/zasmat2104262M"
}

Mrdak, M., Lačnjevac, Č., Rakin, M., Janaćković, Đ., Veljić, D.,& Bajić, D.. (2021). Characterisation of biocompatible layers of ZrO28%Y2O used in combination with other ceramics to modify the surface of implants. in Materials Protection
Engineers Society for Corrosion., 62(4), 262-268.
https://doi.org/10.5937/zasmat2104262M

Mrdak M, Lačnjevac Č, Rakin M, Janaćković Đ, Veljić D, Bajić D. Characterisation of biocompatible layers of ZrO28%Y2O used in combination with other ceramics to modify the surface of implants. in Materials Protection. 2021;62(4):262-268.
doi:10.5937/zasmat2104262M .

Mrdak, Mihailo, Lačnjevac, Časlav, Rakin, Marko, Janaćković, Đorđe, Veljić, Darko, Bajić, Darko, "Characterisation of biocompatible layers of ZrO28%Y2O used in combination with other ceramics to modify the surface of implants" in Materials Protection, 62, no. 4 (2021):262-268,
https://doi.org/10.5937/zasmat2104262M . .

TY  - CONF
AU  - Vujančević, Jelena
AU  - Bjelajac, Anđelika
AU  - Provatas, Georgios
AU  - Siketić, Zdravko
AU  - Jakšić, Milko
AU  - Pavlović, Vladimir
AU  - Janaćković, Đorđe
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/6985
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5749
AB  - Different semiconductors have been studied as photoanode material for solar cells. Among them, TiO2 has been shown to be the best material due to its chemical stability and good charge transport capability. It is usually deposited onto FTO glass (F-SnO2), and then heated at high temperature in order to obtain inter-crystalline electric contact for improving electron conductivity. The focus of this research was chemical analysis of the TiO2 nanotubes (NTs) obtained by anodization of titanium film on FTO glass using NH4F in ethylene glycol electrolyte. There are only few studies suggesting that the electrolyte is a source of N dopant in TiO2, but also Sn diffusion from FTO support was reported. This study aims to show the chemical distribution of elements of interest along the nanotubes depth. For that purpose the time-of-flight elastic recoil detection analysis (ToF-ERDA) and Rutherford backscattering (RBS) methods were used as complementary techniques for chemical analysis of both light, such is N, and heavy elements, such is Sn. The TiO2 NTs films were annealed at different temperatures (450– 630 °C) and the impact of the heating temperature on the chemical distribution was followed.
PB  - Novi Sad : Faculty of Technology
C3  - Programme and book of abstracts / 13th Conference for Young Scientists in Ceramics (CYSC-2017), October 16-19, 2019, Novi Sad
T1  - ToF-ERDA/RBS analysis of annealed TiO2 nanotubes grown onto FTO glass
EP  - 132
SP  - 132
UR  - https://hdl.handle.net/21.15107/rcub_dais_6985
ER  - 

@conference{
author = "Vujančević, Jelena and Bjelajac, Anđelika and Provatas, Georgios and Siketić, Zdravko and Jakšić, Milko and Pavlović, Vladimir and Janaćković, Đorđe",
year = "2019",
abstract = "Different semiconductors have been studied as photoanode material for solar cells. Among them, TiO2 has been shown to be the best material due to its chemical stability and good charge transport capability. It is usually deposited onto FTO glass (F-SnO2), and then heated at high temperature in order to obtain inter-crystalline electric contact for improving electron conductivity. The focus of this research was chemical analysis of the TiO2 nanotubes (NTs) obtained by anodization of titanium film on FTO glass using NH4F in ethylene glycol electrolyte. There are only few studies suggesting that the electrolyte is a source of N dopant in TiO2, but also Sn diffusion from FTO support was reported. This study aims to show the chemical distribution of elements of interest along the nanotubes depth. For that purpose the time-of-flight elastic recoil detection analysis (ToF-ERDA) and Rutherford backscattering (RBS) methods were used as complementary techniques for chemical analysis of both light, such is N, and heavy elements, such is Sn. The TiO2 NTs films were annealed at different temperatures (450– 630 °C) and the impact of the heating temperature on the chemical distribution was followed.",
publisher = "Novi Sad : Faculty of Technology",
journal = "Programme and book of abstracts / 13th Conference for Young Scientists in Ceramics (CYSC-2017), October 16-19, 2019, Novi Sad",
title = "ToF-ERDA/RBS analysis of annealed TiO2 nanotubes grown onto FTO glass",
pages = "132-132",
url = "https://hdl.handle.net/21.15107/rcub_dais_6985"
}

Vujančević, J., Bjelajac, A., Provatas, G., Siketić, Z., Jakšić, M., Pavlović, V.,& Janaćković, Đ.. (2019). ToF-ERDA/RBS analysis of annealed TiO2 nanotubes grown onto FTO glass. in Programme and book of abstracts / 13th Conference for Young Scientists in Ceramics (CYSC-2017), October 16-19, 2019, Novi Sad
Novi Sad : Faculty of Technology., 132-132.
https://hdl.handle.net/21.15107/rcub_dais_6985

Vujančević J, Bjelajac A, Provatas G, Siketić Z, Jakšić M, Pavlović V, Janaćković Đ. ToF-ERDA/RBS analysis of annealed TiO2 nanotubes grown onto FTO glass. in Programme and book of abstracts / 13th Conference for Young Scientists in Ceramics (CYSC-2017), October 16-19, 2019, Novi Sad. 2019;:132-132.
https://hdl.handle.net/21.15107/rcub_dais_6985 .

Vujančević, Jelena, Bjelajac, Anđelika, Provatas, Georgios, Siketić, Zdravko, Jakšić, Milko, Pavlović, Vladimir, Janaćković, Đorđe, "ToF-ERDA/RBS analysis of annealed TiO2 nanotubes grown onto FTO glass" in Programme and book of abstracts / 13th Conference for Young Scientists in Ceramics (CYSC-2017), October 16-19, 2019, Novi Sad (2019):132-132,
https://hdl.handle.net/21.15107/rcub_dais_6985 .

TY  - CONF
AU  - Vujančević, Jelena
AU  - Bjelajac, Anđelika
AU  - Ćirković, Jovana
AU  - Pavlović, Vera P.
AU  - Horváth, Endre
AU  - Forró, László
AU  - Janaćković, Đorđe
AU  - Pavlović, Vladimir B.
PY  - 2018
UR  - http://dais.sanu.ac.rs/123456789/4722
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5735
AB  - Semiconductor TiO2 photocatalysis is a heterogeneous catalysis, where the photons of the sun or artificial light source are activating the catalyst that enters in reactions. The targeted real-world applications are in environmental protection and remediation such as wastewater treatment, air purification and decomposition of harmful organic pollutants. In this talk, I present the synthesis of nanotubular, thin TiO2 coatings with altered morphology and crystallinity made by anodization technique. The influence of the anodization parameters and post-synthesis annealing conditions on the photocatalytic methyl orange dye decomposition was assessed. Different morphology, crystallinity and introducing a dopant into lattice increase electron transport and electron lifetime which further improve photocatalytic activity.
PB  - Belgrade : Institute of Technical Sciences of SASA
C3  - Program and the Book of Abstracts / Seventeenth Young Researchers' Conference Materials Sciences and Engineering, December 5-7, 2018, Belgrade, Serbia
T1  - Customizing nanotubular titania for photocatalytic activity
EP  - 77
SP  - 77
UR  - https://hdl.handle.net/21.15107/rcub_dais_4722
ER  - 

@conference{
author = "Vujančević, Jelena and Bjelajac, Anđelika and Ćirković, Jovana and Pavlović, Vera P. and Horváth, Endre and Forró, László and Janaćković, Đorđe and Pavlović, Vladimir B.",
year = "2018",
abstract = "Semiconductor TiO2 photocatalysis is a heterogeneous catalysis, where the photons of the sun or artificial light source are activating the catalyst that enters in reactions. The targeted real-world applications are in environmental protection and remediation such as wastewater treatment, air purification and decomposition of harmful organic pollutants. In this talk, I present the synthesis of nanotubular, thin TiO2 coatings with altered morphology and crystallinity made by anodization technique. The influence of the anodization parameters and post-synthesis annealing conditions on the photocatalytic methyl orange dye decomposition was assessed. Different morphology, crystallinity and introducing a dopant into lattice increase electron transport and electron lifetime which further improve photocatalytic activity.",
publisher = "Belgrade : Institute of Technical Sciences of SASA",
journal = "Program and the Book of Abstracts / Seventeenth Young Researchers' Conference Materials Sciences and Engineering, December 5-7, 2018, Belgrade, Serbia",
title = "Customizing nanotubular titania for photocatalytic activity",
pages = "77-77",
url = "https://hdl.handle.net/21.15107/rcub_dais_4722"
}

Vujančević, J., Bjelajac, A., Ćirković, J., Pavlović, V. P., Horváth, E., Forró, L., Janaćković, Đ.,& Pavlović, V. B.. (2018). Customizing nanotubular titania for photocatalytic activity. in Program and the Book of Abstracts / Seventeenth Young Researchers' Conference Materials Sciences and Engineering, December 5-7, 2018, Belgrade, Serbia
Belgrade : Institute of Technical Sciences of SASA., 77-77.
https://hdl.handle.net/21.15107/rcub_dais_4722

Vujančević J, Bjelajac A, Ćirković J, Pavlović VP, Horváth E, Forró L, Janaćković Đ, Pavlović VB. Customizing nanotubular titania for photocatalytic activity. in Program and the Book of Abstracts / Seventeenth Young Researchers' Conference Materials Sciences and Engineering, December 5-7, 2018, Belgrade, Serbia. 2018;:77-77.
https://hdl.handle.net/21.15107/rcub_dais_4722 .

Vujančević, Jelena, Bjelajac, Anđelika, Ćirković, Jovana, Pavlović, Vera P., Horváth, Endre, Forró, László, Janaćković, Đorđe, Pavlović, Vladimir B., "Customizing nanotubular titania for photocatalytic activity" in Program and the Book of Abstracts / Seventeenth Young Researchers' Conference Materials Sciences and Engineering, December 5-7, 2018, Belgrade, Serbia (2018):77-77,
https://hdl.handle.net/21.15107/rcub_dais_4722 .

TY  - CONF
AU  - Vujančević, Jelena
AU  - Bjelajac, Anđelika
AU  - Pavlović, Vera P.
AU  - Vlahović, Branislav
AU  - Janaćković, Đorđe
AU  - Pavlović, Vladimir B.
PY  - 2017
UR  - http://dais.sanu.ac.rs/123456789/5141
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5739
AB  - Nanomaterials development is a rapidly emerging field of research with enormous potential for societal and economic benefits. In agro and food industries dimension-dependent properties or phenomena of nanomaterials may be used for various functional effects such as increased bioavailability or decreased toxicity of products, better detection of pathogens, improved food packaging materials, or improved delivery of nutrients. Since these effects may derive from altered or unique characteristics of materials in the nanoscale range that are not normally observed or expected in larger-scale materials with the same chemical composition, such changes raise questions about the safety, effectiveness, performance, quality or public health impact of nanotechnology products. In this article, we have reviewed the fabrication, properties, and selected applications of nanostructured TiO2 based materials. Special attention has been paid to TiO2 nanoparticles and nanotubes fabrication perspectives and applications in agriculture. We have shown that high photocatalytic disinfection and photobiological effects of nanostructured TiO2 coupled with its low price, nontoxicity, and stable performance especially provide new approaches for solving environmental pollution and pesticide residue problems in agriculture.
PB  - Belgrade : Faculty of Agriculture, Department for Agricultural Engineering
C3  - Book of Abstracts / The Third International Symposium on Agricultural Engineering, ISAE-2017, 20th-21st October 2017, Belgrade - Zemun, Serbia
T1  - Fabrication and applications of multifunctional nanostructured TiO2
EP  - 44
EP  - 
EP  - 
SP  - 44
UR  - https://hdl.handle.net/21.15107/rcub_dais_5141
ER  - 

@conference{
author = "Vujančević, Jelena and Bjelajac, Anđelika and Pavlović, Vera P. and Vlahović, Branislav and Janaćković, Đorđe and Pavlović, Vladimir B.",
year = "2017",
abstract = "Nanomaterials development is a rapidly emerging field of research with enormous potential for societal and economic benefits. In agro and food industries dimension-dependent properties or phenomena of nanomaterials may be used for various functional effects such as increased bioavailability or decreased toxicity of products, better detection of pathogens, improved food packaging materials, or improved delivery of nutrients. Since these effects may derive from altered or unique characteristics of materials in the nanoscale range that are not normally observed or expected in larger-scale materials with the same chemical composition, such changes raise questions about the safety, effectiveness, performance, quality or public health impact of nanotechnology products. In this article, we have reviewed the fabrication, properties, and selected applications of nanostructured TiO2 based materials. Special attention has been paid to TiO2 nanoparticles and nanotubes fabrication perspectives and applications in agriculture. We have shown that high photocatalytic disinfection and photobiological effects of nanostructured TiO2 coupled with its low price, nontoxicity, and stable performance especially provide new approaches for solving environmental pollution and pesticide residue problems in agriculture.",
publisher = "Belgrade : Faculty of Agriculture, Department for Agricultural Engineering",
journal = "Book of Abstracts / The Third International Symposium on Agricultural Engineering, ISAE-2017, 20th-21st October 2017, Belgrade - Zemun, Serbia",
title = "Fabrication and applications of multifunctional nanostructured TiO2",
pages = "44---44",
url = "https://hdl.handle.net/21.15107/rcub_dais_5141"
}

Vujančević, J., Bjelajac, A., Pavlović, V. P., Vlahović, B., Janaćković, Đ.,& Pavlović, V. B.. (2017). Fabrication and applications of multifunctional nanostructured TiO2. in Book of Abstracts / The Third International Symposium on Agricultural Engineering, ISAE-2017, 20th-21st October 2017, Belgrade - Zemun, Serbia
Belgrade : Faculty of Agriculture, Department for Agricultural Engineering., 44-44.
https://hdl.handle.net/21.15107/rcub_dais_5141

Vujančević J, Bjelajac A, Pavlović VP, Vlahović B, Janaćković Đ, Pavlović VB. Fabrication and applications of multifunctional nanostructured TiO2. in Book of Abstracts / The Third International Symposium on Agricultural Engineering, ISAE-2017, 20th-21st October 2017, Belgrade - Zemun, Serbia. 2017;:44-44.
https://hdl.handle.net/21.15107/rcub_dais_5141 .

Vujančević, Jelena, Bjelajac, Anđelika, Pavlović, Vera P., Vlahović, Branislav, Janaćković, Đorđe, Pavlović, Vladimir B., "Fabrication and applications of multifunctional nanostructured TiO2" in Book of Abstracts / The Third International Symposium on Agricultural Engineering, ISAE-2017, 20th-21st October 2017, Belgrade - Zemun, Serbia (2017):44-44,
https://hdl.handle.net/21.15107/rcub_dais_5141 .

TY  - CONF
AU  - Vujančević, Jelena
AU  - Bjelajac, Anđelika
AU  - Pavlović, Vera P.
AU  - Vlahović, Branislav
AU  - Janaćković, Đorđe
AU  - Pavlović, Vladimir
PY  - 2017
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5762
AB  - Nanomaterials development is a rapidly emerging field of research with enormous potential for societal and economic benefits. In agro and food industries dimension-dependent properties or phenomena of nanomaterials may be used for various functional effects such as increased bioavailability or decreased toxicity of products, better detection of pathogens, improved food packaging materials, or improved delivery of nutrients. Since these effects may derive from altered or unique characteristics of materials in the nanoscale range that are not normally observed or expected in larger-scale materials with the same chemical composition, such changes raise questions about the safety, effectiveness, performance, quality or public health impact of nanotechnology products. In this article, we have reviewed the fabrication, properties, and selected applications of nanostructured TiO2 based materials. Special attention has been paid to TiO2 nanoparticles and nanotubes fabrication perspectives and applications in agriculture. We have shown that high photocatalytic disinfection and photobiological effects of nanostructured TiO2 coupled with its low price, nontoxicity, and stable performance especially provide new approaches for solving environmental pollution and pesticide residue problems in agriculture.
PB  - Belgrade : Faculty of Agriculture, Department for Agricultural Engineering
C3  - Book of Abstracts / The Third International Symposium on Agricultural Engineering, ISAE-2017, 20th-21st October 2017, Belgrade - Zemun, Serbia
T1  - Fabrication and applications of multifunctional nanostructured TiO2
EP  - 44
SP  - 44
UR  - https://hdl.handle.net/21.15107/rcub_dais_5141
ER  - 

@conference{
author = "Vujančević, Jelena and Bjelajac, Anđelika and Pavlović, Vera P. and Vlahović, Branislav and Janaćković, Đorđe and Pavlović, Vladimir",
year = "2017",
abstract = "Nanomaterials development is a rapidly emerging field of research with enormous potential for societal and economic benefits. In agro and food industries dimension-dependent properties or phenomena of nanomaterials may be used for various functional effects such as increased bioavailability or decreased toxicity of products, better detection of pathogens, improved food packaging materials, or improved delivery of nutrients. Since these effects may derive from altered or unique characteristics of materials in the nanoscale range that are not normally observed or expected in larger-scale materials with the same chemical composition, such changes raise questions about the safety, effectiveness, performance, quality or public health impact of nanotechnology products. In this article, we have reviewed the fabrication, properties, and selected applications of nanostructured TiO2 based materials. Special attention has been paid to TiO2 nanoparticles and nanotubes fabrication perspectives and applications in agriculture. We have shown that high photocatalytic disinfection and photobiological effects of nanostructured TiO2 coupled with its low price, nontoxicity, and stable performance especially provide new approaches for solving environmental pollution and pesticide residue problems in agriculture.",
publisher = "Belgrade : Faculty of Agriculture, Department for Agricultural Engineering",
journal = "Book of Abstracts / The Third International Symposium on Agricultural Engineering, ISAE-2017, 20th-21st October 2017, Belgrade - Zemun, Serbia",
title = "Fabrication and applications of multifunctional nanostructured TiO2",
pages = "44-44",
url = "https://hdl.handle.net/21.15107/rcub_dais_5141"
}

Vujančević, J., Bjelajac, A., Pavlović, V. P., Vlahović, B., Janaćković, Đ.,& Pavlović, V.. (2017). Fabrication and applications of multifunctional nanostructured TiO2. in Book of Abstracts / The Third International Symposium on Agricultural Engineering, ISAE-2017, 20th-21st October 2017, Belgrade - Zemun, Serbia
Belgrade : Faculty of Agriculture, Department for Agricultural Engineering., 44-44.
https://hdl.handle.net/21.15107/rcub_dais_5141

Vujančević J, Bjelajac A, Pavlović VP, Vlahović B, Janaćković Đ, Pavlović V. Fabrication and applications of multifunctional nanostructured TiO2. in Book of Abstracts / The Third International Symposium on Agricultural Engineering, ISAE-2017, 20th-21st October 2017, Belgrade - Zemun, Serbia. 2017;:44-44.
https://hdl.handle.net/21.15107/rcub_dais_5141 .

Vujančević, Jelena, Bjelajac, Anđelika, Pavlović, Vera P., Vlahović, Branislav, Janaćković, Đorđe, Pavlović, Vladimir, "Fabrication and applications of multifunctional nanostructured TiO2" in Book of Abstracts / The Third International Symposium on Agricultural Engineering, ISAE-2017, 20th-21st October 2017, Belgrade - Zemun, Serbia (2017):44-44,
https://hdl.handle.net/21.15107/rcub_dais_5141 .

TY  - CONF
AU  - Vujančević, Jelena
AU  - Bjelajac, Anđelika
AU  - Obradović, Nina
AU  - Pavlović, Vera P.
AU  - Mitrić, Miodrag
AU  - Janaćković, Đorđe
AU  - Rašić, Goran
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir B.
PY  - 2015
UR  - http://dais.sanu.ac.rs/123456789/764
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5710
AB  - The influence of electrochemical conditions and the heat treatment on the crystal structure and the microstructure evolution of TiO2 based nanotubes synthesized by the self-ordering anodization process is investigated in this work. The electrochemical anodization was performed at room temperature, for 30 minutes under 15, 20 and 25 V, with stirring. The as-anodized Ti foils were annealed in air at 450, 600, 650 and 700 °C for 30 minutes. The structure and the lattice dynamics of the samples has been studied by using XRD and Raman spectroscopy methods. The microstructure development of the 1-D TiO2 nanostructures has been analyzed by FESEM.
PB  - Belgrade : Serbian Ceramic Society
C3  - Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / IV Serbian Ceramic Society Conference, Belgrade, 21-23. September 2015
T1  - Influence of Synthesis Parameters on Structure of 1-D TiO2 nanostructures
EP  - 81
SP  - 81
UR  - https://hdl.handle.net/21.15107/rcub_dais_764
ER  - 

@conference{
author = "Vujančević, Jelena and Bjelajac, Anđelika and Obradović, Nina and Pavlović, Vera P. and Mitrić, Miodrag and Janaćković, Đorđe and Rašić, Goran and Vlahović, Branislav and Pavlović, Vladimir B.",
year = "2015",
abstract = "The influence of electrochemical conditions and the heat treatment on the crystal structure and the microstructure evolution of TiO2 based nanotubes synthesized by the self-ordering anodization process is investigated in this work. The electrochemical anodization was performed at room temperature, for 30 minutes under 15, 20 and 25 V, with stirring. The as-anodized Ti foils were annealed in air at 450, 600, 650 and 700 °C for 30 minutes. The structure and the lattice dynamics of the samples has been studied by using XRD and Raman spectroscopy methods. The microstructure development of the 1-D TiO2 nanostructures has been analyzed by FESEM.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / IV Serbian Ceramic Society Conference, Belgrade, 21-23. September 2015",
title = "Influence of Synthesis Parameters on Structure of 1-D TiO2 nanostructures",
pages = "81-81",
url = "https://hdl.handle.net/21.15107/rcub_dais_764"
}

Vujančević, J., Bjelajac, A., Obradović, N., Pavlović, V. P., Mitrić, M., Janaćković, Đ., Rašić, G., Vlahović, B.,& Pavlović, V. B.. (2015). Influence of Synthesis Parameters on Structure of 1-D TiO2 nanostructures. in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / IV Serbian Ceramic Society Conference, Belgrade, 21-23. September 2015
Belgrade : Serbian Ceramic Society., 81-81.
https://hdl.handle.net/21.15107/rcub_dais_764

Vujančević J, Bjelajac A, Obradović N, Pavlović VP, Mitrić M, Janaćković Đ, Rašić G, Vlahović B, Pavlović VB. Influence of Synthesis Parameters on Structure of 1-D TiO2 nanostructures. in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / IV Serbian Ceramic Society Conference, Belgrade, 21-23. September 2015. 2015;:81-81.
https://hdl.handle.net/21.15107/rcub_dais_764 .

Vujančević, Jelena, Bjelajac, Anđelika, Obradović, Nina, Pavlović, Vera P., Mitrić, Miodrag, Janaćković, Đorđe, Rašić, Goran, Vlahović, Branislav, Pavlović, Vladimir B., "Influence of Synthesis Parameters on Structure of 1-D TiO2 nanostructures" in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / IV Serbian Ceramic Society Conference, Belgrade, 21-23. September 2015 (2015):81-81,
https://hdl.handle.net/21.15107/rcub_dais_764 .

TY  - CONF
AU  - Vujančević, Jelena
AU  - Đokić, Veljko
AU  - Bjelajac, Anđelika
AU  - Pavlović, Vera P.
AU  - Mitrić, Miodrag
AU  - Janaćković, Đorđe
AU  - Pavlović, Vladimir B.
PY  - 2015
UR  - http://dais.sanu.ac.rs/123456789/841
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5712
AB  - Having in mind that anodic oxidation method can be used for tailoring desired structure and morphology of TiO2, herein the synthesis of self-ordered TiO2 nanotubes via electrochemical anodization of high purity Ti foil is reported. The influence of synthesis parameters such as oxidative voltage, different electrolyte, annealing temperature and annealing atmosphere were explored and correlate with obtained TiO2 nanotube arrays. The results show that applied potential is the main factor that controls the diameter of the nanotubes, while annealing temperature influence on crystal type and morphology is related to different contents of electrolyte. Investigated method gives opportunity to enhanced performance of TiO2 nanotubes, providing many applications in different field.
PB  - Belgrade : Institute of Technical Sciences of SASA
C3  - Program and the Book of Abstracts / Fourteenth Young Researchers' Conference Materials Sciences and Engineering, December 9-11, 2015, Belgrade, Serbia
T1  - Tailoring self-ordering TiO2 nanotube arrays by oxidative anodization
EP  - 18
SP  - 18
UR  - https://hdl.handle.net/21.15107/rcub_dais_841
ER  - 

@conference{
author = "Vujančević, Jelena and Đokić, Veljko and Bjelajac, Anđelika and Pavlović, Vera P. and Mitrić, Miodrag and Janaćković, Đorđe and Pavlović, Vladimir B.",
year = "2015",
abstract = "Having in mind that anodic oxidation method can be used for tailoring desired structure and morphology of TiO2, herein the synthesis of self-ordered TiO2 nanotubes via electrochemical anodization of high purity Ti foil is reported. The influence of synthesis parameters such as oxidative voltage, different electrolyte, annealing temperature and annealing atmosphere were explored and correlate with obtained TiO2 nanotube arrays. The results show that applied potential is the main factor that controls the diameter of the nanotubes, while annealing temperature influence on crystal type and morphology is related to different contents of electrolyte. Investigated method gives opportunity to enhanced performance of TiO2 nanotubes, providing many applications in different field.",
publisher = "Belgrade : Institute of Technical Sciences of SASA",
journal = "Program and the Book of Abstracts / Fourteenth Young Researchers' Conference Materials Sciences and Engineering, December 9-11, 2015, Belgrade, Serbia",
title = "Tailoring self-ordering TiO2 nanotube arrays by oxidative anodization",
pages = "18-18",
url = "https://hdl.handle.net/21.15107/rcub_dais_841"
}

Vujančević, J., Đokić, V., Bjelajac, A., Pavlović, V. P., Mitrić, M., Janaćković, Đ.,& Pavlović, V. B.. (2015). Tailoring self-ordering TiO2 nanotube arrays by oxidative anodization. in Program and the Book of Abstracts / Fourteenth Young Researchers' Conference Materials Sciences and Engineering, December 9-11, 2015, Belgrade, Serbia
Belgrade : Institute of Technical Sciences of SASA., 18-18.
https://hdl.handle.net/21.15107/rcub_dais_841

Vujančević J, Đokić V, Bjelajac A, Pavlović VP, Mitrić M, Janaćković Đ, Pavlović VB. Tailoring self-ordering TiO2 nanotube arrays by oxidative anodization. in Program and the Book of Abstracts / Fourteenth Young Researchers' Conference Materials Sciences and Engineering, December 9-11, 2015, Belgrade, Serbia. 2015;:18-18.
https://hdl.handle.net/21.15107/rcub_dais_841 .

Vujančević, Jelena, Đokić, Veljko, Bjelajac, Anđelika, Pavlović, Vera P., Mitrić, Miodrag, Janaćković, Đorđe, Pavlović, Vladimir B., "Tailoring self-ordering TiO2 nanotube arrays by oxidative anodization" in Program and the Book of Abstracts / Fourteenth Young Researchers' Conference Materials Sciences and Engineering, December 9-11, 2015, Belgrade, Serbia (2015):18-18,
https://hdl.handle.net/21.15107/rcub_dais_841 .

TY  - JOUR
AU  - Mrdak, Mihailo
AU  - Lačnjevac, Časlav
AU  - Rakin, Marko
AU  - Janaćković, Đorđe
AU  - Veljić, Darko
PY  - 2011
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5915
AB  - In this paper, studied was the melting of W powder particles in plasma, their behavior at oxidation as well as the mechanism of hardening on the surface of the substrate. Tungsten coating layers were deposited with vacuum plasma spray technology (VPS) on the test specimens of steel Č.4171 (X15Cr13 EN10027). VPS technology has advantages over the APS technology due to decreased oxidation of melted powder particles, by producing a coating with a controlled proportion of micro pores and greater uniformity of the deposited layers. Evaluation of mechanical characteristics of the layers was done by examining the microhardness using the HV0.3 method and tensile bond strength by tensile testing. The microstructures of the deposited layers were analyzed by means of optical microscopy (OM) and scanning electron microscopy (SEM). The results obtained showed that the tungsten coating consisted of well melted particles that interconnected and were overlapping, which shows a typical lamellar microstructure. Present in the microstructure are micro pores in very small proportion at the inter-lamellar boundaries. Tests have shown that layers of W coating deposited by plasma spray in inert gas shielding at low pressure have good mechanical properties and microstructure, which in the fully enables its use in exploitation.
PB  - Engineers Society for Corrosion
T2  - Materials Protection
T1  - [Characterization of vacuum plasma spray vps-w coating deposited on stainless steel substrates] [Karakterizacija vakuum plazma sprej vps-w prevlake deponovane na čeličnim podloga]
EP  - 112
IS  - 2
SP  - 106
VL  - 2021
DO  - 10.5937/zasmat2102106M
ER  - 

@article{
author = "Mrdak, Mihailo and Lačnjevac, Časlav and Rakin, Marko and Janaćković, Đorđe and Veljić, Darko",
year = "2011",
abstract = "In this paper, studied was the melting of W powder particles in plasma, their behavior at oxidation as well as the mechanism of hardening on the surface of the substrate. Tungsten coating layers were deposited with vacuum plasma spray technology (VPS) on the test specimens of steel Č.4171 (X15Cr13 EN10027). VPS technology has advantages over the APS technology due to decreased oxidation of melted powder particles, by producing a coating with a controlled proportion of micro pores and greater uniformity of the deposited layers. Evaluation of mechanical characteristics of the layers was done by examining the microhardness using the HV0.3 method and tensile bond strength by tensile testing. The microstructures of the deposited layers were analyzed by means of optical microscopy (OM) and scanning electron microscopy (SEM). The results obtained showed that the tungsten coating consisted of well melted particles that interconnected and were overlapping, which shows a typical lamellar microstructure. Present in the microstructure are micro pores in very small proportion at the inter-lamellar boundaries. Tests have shown that layers of W coating deposited by plasma spray in inert gas shielding at low pressure have good mechanical properties and microstructure, which in the fully enables its use in exploitation.",
publisher = "Engineers Society for Corrosion",
journal = "Materials Protection",
title = "[Characterization of vacuum plasma spray vps-w coating deposited on stainless steel substrates] [Karakterizacija vakuum plazma sprej vps-w prevlake deponovane na čeličnim podloga]",
pages = "112-106",
number = "2",
volume = "2021",
doi = "10.5937/zasmat2102106M"
}

Mrdak, M., Lačnjevac, Č., Rakin, M., Janaćković, Đ.,& Veljić, D.. (2011). [Characterization of vacuum plasma spray vps-w coating deposited on stainless steel substrates] [Karakterizacija vakuum plazma sprej vps-w prevlake deponovane na čeličnim podloga]. in Materials Protection
Engineers Society for Corrosion., 2021(2), 106-112.
https://doi.org/10.5937/zasmat2102106M

Mrdak M, Lačnjevac Č, Rakin M, Janaćković Đ, Veljić D. [Characterization of vacuum plasma spray vps-w coating deposited on stainless steel substrates] [Karakterizacija vakuum plazma sprej vps-w prevlake deponovane na čeličnim podloga]. in Materials Protection. 2011;2021(2):106-112.
doi:10.5937/zasmat2102106M .

Mrdak, Mihailo, Lačnjevac, Časlav, Rakin, Marko, Janaćković, Đorđe, Veljić, Darko, "[Characterization of vacuum plasma spray vps-w coating deposited on stainless steel substrates] [Karakterizacija vakuum plazma sprej vps-w prevlake deponovane na čeličnim podloga]" in Materials Protection, 2021, no. 2 (2011):106-112,
https://doi.org/10.5937/zasmat2102106M . .