The effect of polyhedral oligosilsesquioxanes (POSS) on cavitation resistance of hybrid acrylate films
Samo za registrovane korisnike
2020
Autori
Kalifa, MustafaTomić, Nataša Z.
Vuksanović, Marija M.
Stevanović, Sanja
Dokić, Veljko
Volkov-Husović, Tatjana
Pavlović, Vladimir
Jancić-Heinemann, Radmila
Marinković, Aleksandar D.
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
Cavitation erosion of hybrid acrylate composite films with polyhedral oligosilsesquioxanes (POSS) was investigated in this study. The hybrid films are made with 1, 3 and 5 wt% of POSS reagents containing: (a) hydroxyl (POSS-M), (b) both hydroxyl and allyl (POSS-M-A) and (c) methacryloyl groups (POSS-M-Cl). Addition of 5 wt% POSS-M-A caused the highest microhardness increase for 49.8%, in comparison to the pure matrix material. Cavitation resistance of hybrid films, estimated as the time-dependent mass loss, was improved by POSS addition. POSS-M-A addition (5 wt%) contributed to 94% lower mass loss comparing to pure Bis-GMA/TEGDMA film. Scanning electron (SEM) and atomic force microscopy (AFM) showed the lowest surface roughness obtained for composite with POSS-M-A. The improved hardness and wear resistance of the composite films indicated that POSS-M-A filler enhanced interfacial adhesion and reinforcing of the Bis-GMA/TEGDMA matrix.
Ključne reči:
cavitation erosion / coatings / crosslinking / microscopy / surfacesIzvor:
Polymer Composites, 2020, 41, 8, 3403-3410Izdavač:
- Wiley, Hoboken
Finansiranje / projekti:
- Razvoj opreme i procesa dobijanja polimernih kompozitnih materijala sa unapred definisanim funkcionalnim svojstvima (RS-MESTD-Technological Development (TD or TR)-34011)
- Ministarstvo nauke, tehnološkog razvoja i inovacija Republike Srbije, institucionalno finansiranje - 200135 (Univerzitet u Beogradu, Tehnološko-metalurški fakultet) (RS-MESTD-inst-2020-200135)
DOI: 10.1002/pc.25629
ISSN: 0272-8397
WoS: 000532986100001
Scopus: 2-s2.0-85085014224
Institucija/grupa
Poljoprivredni fakultetTY - JOUR AU - Kalifa, Mustafa AU - Tomić, Nataša Z. AU - Vuksanović, Marija M. AU - Stevanović, Sanja AU - Dokić, Veljko AU - Volkov-Husović, Tatjana AU - Pavlović, Vladimir AU - Jancić-Heinemann, Radmila AU - Marinković, Aleksandar D. PY - 2020 UR - http://aspace.agrif.bg.ac.rs/handle/123456789/5401 AB - Cavitation erosion of hybrid acrylate composite films with polyhedral oligosilsesquioxanes (POSS) was investigated in this study. The hybrid films are made with 1, 3 and 5 wt% of POSS reagents containing: (a) hydroxyl (POSS-M), (b) both hydroxyl and allyl (POSS-M-A) and (c) methacryloyl groups (POSS-M-Cl). Addition of 5 wt% POSS-M-A caused the highest microhardness increase for 49.8%, in comparison to the pure matrix material. Cavitation resistance of hybrid films, estimated as the time-dependent mass loss, was improved by POSS addition. POSS-M-A addition (5 wt%) contributed to 94% lower mass loss comparing to pure Bis-GMA/TEGDMA film. Scanning electron (SEM) and atomic force microscopy (AFM) showed the lowest surface roughness obtained for composite with POSS-M-A. The improved hardness and wear resistance of the composite films indicated that POSS-M-A filler enhanced interfacial adhesion and reinforcing of the Bis-GMA/TEGDMA matrix. PB - Wiley, Hoboken T2 - Polymer Composites T1 - The effect of polyhedral oligosilsesquioxanes (POSS) on cavitation resistance of hybrid acrylate films EP - 3410 IS - 8 SP - 3403 VL - 41 DO - 10.1002/pc.25629 ER -
@article{ author = "Kalifa, Mustafa and Tomić, Nataša Z. and Vuksanović, Marija M. and Stevanović, Sanja and Dokić, Veljko and Volkov-Husović, Tatjana and Pavlović, Vladimir and Jancić-Heinemann, Radmila and Marinković, Aleksandar D.", year = "2020", abstract = "Cavitation erosion of hybrid acrylate composite films with polyhedral oligosilsesquioxanes (POSS) was investigated in this study. The hybrid films are made with 1, 3 and 5 wt% of POSS reagents containing: (a) hydroxyl (POSS-M), (b) both hydroxyl and allyl (POSS-M-A) and (c) methacryloyl groups (POSS-M-Cl). Addition of 5 wt% POSS-M-A caused the highest microhardness increase for 49.8%, in comparison to the pure matrix material. Cavitation resistance of hybrid films, estimated as the time-dependent mass loss, was improved by POSS addition. POSS-M-A addition (5 wt%) contributed to 94% lower mass loss comparing to pure Bis-GMA/TEGDMA film. Scanning electron (SEM) and atomic force microscopy (AFM) showed the lowest surface roughness obtained for composite with POSS-M-A. The improved hardness and wear resistance of the composite films indicated that POSS-M-A filler enhanced interfacial adhesion and reinforcing of the Bis-GMA/TEGDMA matrix.", publisher = "Wiley, Hoboken", journal = "Polymer Composites", title = "The effect of polyhedral oligosilsesquioxanes (POSS) on cavitation resistance of hybrid acrylate films", pages = "3410-3403", number = "8", volume = "41", doi = "10.1002/pc.25629" }
Kalifa, M., Tomić, N. Z., Vuksanović, M. M., Stevanović, S., Dokić, V., Volkov-Husović, T., Pavlović, V., Jancić-Heinemann, R.,& Marinković, A. D.. (2020). The effect of polyhedral oligosilsesquioxanes (POSS) on cavitation resistance of hybrid acrylate films. in Polymer Composites Wiley, Hoboken., 41(8), 3403-3410. https://doi.org/10.1002/pc.25629
Kalifa M, Tomić NZ, Vuksanović MM, Stevanović S, Dokić V, Volkov-Husović T, Pavlović V, Jancić-Heinemann R, Marinković AD. The effect of polyhedral oligosilsesquioxanes (POSS) on cavitation resistance of hybrid acrylate films. in Polymer Composites. 2020;41(8):3403-3410. doi:10.1002/pc.25629 .
Kalifa, Mustafa, Tomić, Nataša Z., Vuksanović, Marija M., Stevanović, Sanja, Dokić, Veljko, Volkov-Husović, Tatjana, Pavlović, Vladimir, Jancić-Heinemann, Radmila, Marinković, Aleksandar D., "The effect of polyhedral oligosilsesquioxanes (POSS) on cavitation resistance of hybrid acrylate films" in Polymer Composites, 41, no. 8 (2020):3403-3410, https://doi.org/10.1002/pc.25629 . .