Aqueous extraction of anions from coal and fly ash followed by ion-chromatographic determination

Abstract

Three different techniques were applied for the aqueous extraction of anions from coal and fly ash: rotary mixer-and ultrasonic-assisted extraction with different duration time, and microwave-assisted extraction at different temperatures. Validation showed that the ion-chromatographic method was suitable for the analysis of anions in coal and fly ash extracts. The variations in the amounts of anions using different extraction times during rotary-assisted extraction were minimal for all investigated anions. The efficiency of ultrasound-assisted extraction of anions from coal depended on the sonication time and was highest at 30 min. The ultrasound-assisted extraction was less efficient for the extraction of anions from fly ash than rotary-assisted extraction. Increase of temperature in the microwave-assisted extraction had a positive effect on the amounts of all anions extracted from coal and sulphate from fly ash, while the amounts of fluoride and chloride in fly ash extracts decreased. The microwave-assisted extraction of coal at 150 degrees C was compared with standard ASTM methods, and results were in good agreement only for chloride. Changes in the pH value and conductivity during ultrasound-assisted extraction were measured in order to explain changes on the surface of coal particles in contact with water and different processes that occur under environmental conditions.