Претраживање
Приказ резултата 11-20 од 34
Sintering Process Influence on Microstructure and Intergranular Impedance of Rare-Earth Modified BaTiO3-Ceramics
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2011)
Sintering process is a complex of different synergetic effects during the ceramics materials consolidation. The microstructural level properties control is very important as a stage in advanced materials prognosis. SEM ...
Analysis and Modeling of Sintering of Sr-hexaferrite Produced by PIM Technology
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2011)
The powder injection moulding (PIM) technology is lately becoming more and more significant due to complex design possibilities and good repeatability. This technology requires optimization of all steps starting with ...
Electrical Properties and Microstructure Fractal Analysis of Magnesium-Modified Aluminium-Silicate Ceramics
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2011)
The addition of Mg(2)(NO)(3) and some active additives, composed of Al salts, to the mixtures of kaolinite and bentonite can provide clay compositions which, after sintering at high temperatures, produce very porous ceramics ...
Isothermal kinetics of titanium-oxo-alkoxy clusters formation
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2011)
In this article, the influences of titanium tetraisopropoxide Ti(OR)4 (R = Pri) concentration, molar ratio, h = [H2O]/[Ti(OR)4], and temperature, on the formation kinetics of the titanium-oxo-alkoxy clusters (TOAC), were ...
Influence of Prolonged Sintering Time on Density and Electrical Properties of Isothermally Sintered Cordierite-based Ceramics
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2013)
Mechanical activation is a commonly used and relatively fast and inexpensive procedure for sample preparation before the sintering process. Cordierite, a stoichiometric mixture of three different oxides (2MgO center dot ...
The Influence of Compaction Pressure on the Density and Electrical Properties of Cordierite-based Ceramics
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2015)
Due to its characteristics, cordierite, 2MgO center dot 2Al(2)O(3)center dot 5SiO(2), is a high-temperature ceramic material of a great scientific interest. Mechanical activation of the starting mixtures containing 5.00 ...
Structural and Electrical Properties of Ti Doped alpha-Fe2O3
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2013)
In this work we have analyzed the effects of Ti doping on structural and electrical properties of alpha-Fe2O3. When the amount of added Ti (5 wt.% TiO2) was within the solubility degree and XRD, SEM and EDS analysis revealed ...
Investigation of Sintering Kinetics of Magnesium Titanate
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2013)
Obtaining new materials including sintered electronic materials using different procedures is the consequence of long complex and expensive experimental work. However, the dynamics of expansive development of electronic ...
Physical Properties of Sintered Alumina Doped with Different Oxides
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2018)
Corundum (alpha-alumina) is a suiTab. material for usage in various industry fields owing to its chemical stability, electrical and mechanical features. It is known that properties of ceramics could be modified by addition ...
Mechanical-Chemical Synthesis Ba0.77Sr0.23TiO3
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2012)
Barium-Strontium-Titanate Ba0.77Sr0.23TiO3 was prepared from starting materials BaCO3, SrCO3 and TiO2 through solid-state reactions. Mixtures of these oxides are mechanically activated in a high-energy planetary ball mill ...