Morphology investigation of mechanically activated ZnO-SnO2 system
Само за регистроване кориснике
2008
Аутори
Ivetić, T.Vuković, Z.
Nikolić, M.V.
Pavlović, Vladimir
Nikolić, J.R.
Minić, Dragica M.
Ristić, M.M.
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Powder mixtures of zinc oxide and tin oxide in the molar ratio, ZnO:SnO2 = 2: 1, were mechanically activated in a planetary ball mill in the time intervals of 0-160 min. The adsorption-desorption isotherms, specific surface area, pore volume and pore size distribution spectra of mechanically activated powder mixtures were established by N-2 adsorption at 77 K. Microstructure analysis was performed using scanning electron microscopy (SEM) and digital pattern recognition (DPR) microstructure quantity analysis. The phase composition of the mixed powders was determined by Xray analysis. Mechanochemical activation of the ZnO-SnO2 system resulted in fine grinding of the starting particles and generation of contacts between them, mass transfer at contacts zones and formation of Zn2SnO4 spinel, which was observed after 40 min of activation.
Кључне речи:
milling / powders : solid-state reaction / spinels / microstructure analysisИзвор:
Ceramics International, 2008, 34, 3, 639-643Издавач:
- Elsevier Sci Ltd, Oxford
Финансирање / пројекти:
- Проучавање међузависности у тријади ''синтеза-структура-својства'' за функционалне материјала (RS-142011)
DOI: 10.1016/j.ceramint.2007.01.003
ISSN: 0272-8842
WoS: 000254698300028
Scopus: 2-s2.0-39049093773
Институција/група
Poljoprivredni fakultetTY - JOUR AU - Ivetić, T. AU - Vuković, Z. AU - Nikolić, M.V. AU - Pavlović, Vladimir AU - Nikolić, J.R. AU - Minić, Dragica M. AU - Ristić, M.M. PY - 2008 UR - http://aspace.agrif.bg.ac.rs/handle/123456789/1805 AB - Powder mixtures of zinc oxide and tin oxide in the molar ratio, ZnO:SnO2 = 2: 1, were mechanically activated in a planetary ball mill in the time intervals of 0-160 min. The adsorption-desorption isotherms, specific surface area, pore volume and pore size distribution spectra of mechanically activated powder mixtures were established by N-2 adsorption at 77 K. Microstructure analysis was performed using scanning electron microscopy (SEM) and digital pattern recognition (DPR) microstructure quantity analysis. The phase composition of the mixed powders was determined by Xray analysis. Mechanochemical activation of the ZnO-SnO2 system resulted in fine grinding of the starting particles and generation of contacts between them, mass transfer at contacts zones and formation of Zn2SnO4 spinel, which was observed after 40 min of activation. PB - Elsevier Sci Ltd, Oxford T2 - Ceramics International T1 - Morphology investigation of mechanically activated ZnO-SnO2 system EP - 643 IS - 3 SP - 639 VL - 34 DO - 10.1016/j.ceramint.2007.01.003 ER -
@article{ author = "Ivetić, T. and Vuković, Z. and Nikolić, M.V. and Pavlović, Vladimir and Nikolić, J.R. and Minić, Dragica M. and Ristić, M.M.", year = "2008", abstract = "Powder mixtures of zinc oxide and tin oxide in the molar ratio, ZnO:SnO2 = 2: 1, were mechanically activated in a planetary ball mill in the time intervals of 0-160 min. The adsorption-desorption isotherms, specific surface area, pore volume and pore size distribution spectra of mechanically activated powder mixtures were established by N-2 adsorption at 77 K. Microstructure analysis was performed using scanning electron microscopy (SEM) and digital pattern recognition (DPR) microstructure quantity analysis. The phase composition of the mixed powders was determined by Xray analysis. Mechanochemical activation of the ZnO-SnO2 system resulted in fine grinding of the starting particles and generation of contacts between them, mass transfer at contacts zones and formation of Zn2SnO4 spinel, which was observed after 40 min of activation.", publisher = "Elsevier Sci Ltd, Oxford", journal = "Ceramics International", title = "Morphology investigation of mechanically activated ZnO-SnO2 system", pages = "643-639", number = "3", volume = "34", doi = "10.1016/j.ceramint.2007.01.003" }
Ivetić, T., Vuković, Z., Nikolić, M.V., Pavlović, V., Nikolić, J.R., Minić, D. M.,& Ristić, M.M.. (2008). Morphology investigation of mechanically activated ZnO-SnO2 system. in Ceramics International Elsevier Sci Ltd, Oxford., 34(3), 639-643. https://doi.org/10.1016/j.ceramint.2007.01.003
Ivetić T, Vuković Z, Nikolić M, Pavlović V, Nikolić J, Minić DM, Ristić M. Morphology investigation of mechanically activated ZnO-SnO2 system. in Ceramics International. 2008;34(3):639-643. doi:10.1016/j.ceramint.2007.01.003 .
Ivetić, T., Vuković, Z., Nikolić, M.V., Pavlović, Vladimir, Nikolić, J.R., Minić, Dragica M., Ristić, M.M., "Morphology investigation of mechanically activated ZnO-SnO2 system" in Ceramics International, 34, no. 3 (2008):639-643, https://doi.org/10.1016/j.ceramint.2007.01.003 . .