Correlation between densification rate and microstructure evolution of mechanically activated BaTiO3
Само за регистроване кориснике
2005
Конференцијски прилог (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Increasing demands on the quality of electronic ceramics requires a well-controlled correlation between particle morphology and processing conditions. Since mechanical activation is one of the methods for modification of physico-chemical properties of dispersed systems, in this study a correlation between the densification rate and microstructure evolution of mechanically activated BaTiO3 has been analyzed. The shrinkage behaviour of mechanically activated samples, sintered under non-isothermal conditions has been analyzed by a sensitive dilatometer. Densification rate as a function of relative density for different activation times has been calculated. Microstructure investigations of sintered samples were carried out, using a scanning electron microscope (SEM). The presented results enable establishing processing parameters that are indispensable for obtaining materials with advanced properties.
Кључне речи:
barium-titanate / sintering / densification rate / microstructureИзвор:
Ferroelectrics, 2005, 319, 75-85Издавач:
- Taylor & Francis Ltd, Abingdon
DOI: 10.1080/00150190590965451
ISSN: 0015-0193
WoS: 000230962400010
Scopus: 2-s2.0-33751020628
Институција/група
Poljoprivredni fakultetTY - CONF AU - Pavlović, V. P. AU - Nikolić, MV AU - Pavlović, Vladimir AU - Labus, Nebojša AU - Zivković, L AU - Stojanović, BD PY - 2005 UR - http://aspace.agrif.bg.ac.rs/handle/123456789/1001 AB - Increasing demands on the quality of electronic ceramics requires a well-controlled correlation between particle morphology and processing conditions. Since mechanical activation is one of the methods for modification of physico-chemical properties of dispersed systems, in this study a correlation between the densification rate and microstructure evolution of mechanically activated BaTiO3 has been analyzed. The shrinkage behaviour of mechanically activated samples, sintered under non-isothermal conditions has been analyzed by a sensitive dilatometer. Densification rate as a function of relative density for different activation times has been calculated. Microstructure investigations of sintered samples were carried out, using a scanning electron microscope (SEM). The presented results enable establishing processing parameters that are indispensable for obtaining materials with advanced properties. PB - Taylor & Francis Ltd, Abingdon C3 - Ferroelectrics T1 - Correlation between densification rate and microstructure evolution of mechanically activated BaTiO3 EP - 85 SP - 75 VL - 319 DO - 10.1080/00150190590965451 ER -
@conference{ author = "Pavlović, V. P. and Nikolić, MV and Pavlović, Vladimir and Labus, Nebojša and Zivković, L and Stojanović, BD", year = "2005", abstract = "Increasing demands on the quality of electronic ceramics requires a well-controlled correlation between particle morphology and processing conditions. Since mechanical activation is one of the methods for modification of physico-chemical properties of dispersed systems, in this study a correlation between the densification rate and microstructure evolution of mechanically activated BaTiO3 has been analyzed. The shrinkage behaviour of mechanically activated samples, sintered under non-isothermal conditions has been analyzed by a sensitive dilatometer. Densification rate as a function of relative density for different activation times has been calculated. Microstructure investigations of sintered samples were carried out, using a scanning electron microscope (SEM). The presented results enable establishing processing parameters that are indispensable for obtaining materials with advanced properties.", publisher = "Taylor & Francis Ltd, Abingdon", journal = "Ferroelectrics", title = "Correlation between densification rate and microstructure evolution of mechanically activated BaTiO3", pages = "85-75", volume = "319", doi = "10.1080/00150190590965451" }
Pavlović, V. P., Nikolić, M., Pavlović, V., Labus, N., Zivković, L.,& Stojanović, B.. (2005). Correlation between densification rate and microstructure evolution of mechanically activated BaTiO3. in Ferroelectrics Taylor & Francis Ltd, Abingdon., 319, 75-85. https://doi.org/10.1080/00150190590965451
Pavlović VP, Nikolić M, Pavlović V, Labus N, Zivković L, Stojanović B. Correlation between densification rate and microstructure evolution of mechanically activated BaTiO3. in Ferroelectrics. 2005;319:75-85. doi:10.1080/00150190590965451 .
Pavlović, V. P., Nikolić, MV, Pavlović, Vladimir, Labus, Nebojša, Zivković, L, Stojanović, BD, "Correlation between densification rate and microstructure evolution of mechanically activated BaTiO3" in Ferroelectrics, 319 (2005):75-85, https://doi.org/10.1080/00150190590965451 . .