Blanusa, J.

Link to this page

Authority KeyName Variants
orcid::0000-0003-4930-9730
  • Blanusa, J. (2)
  • Blanusa, Jovan (1)
Projects

Author's Bibliography

Raman Responses in Mechanically Activated BaTiO3

Pavlović, Vera P.; Nikolić, Maria V.; Pavlović, Vladimir; Blanusa, Jovan; Stevanović, Suzana; Mitić, Vojislav V.; Scepanović, Maja; Vlahović, Branislav

(Wiley, Hoboken, 2014)

TY  - JOUR
AU  - Pavlović, Vera P.
AU  - Nikolić, Maria V.
AU  - Pavlović, Vladimir
AU  - Blanusa, Jovan
AU  - Stevanović, Suzana
AU  - Mitić, Vojislav V.
AU  - Scepanović, Maja
AU  - Vlahović, Branislav
PY  - 2014
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/3495
AB  - The structure and lattice dynamics of mechanically activated BaTiO3 was investigated in this study. Phonon behavior and crystal structure stability of the obtained nanocrystalline BaTiO3 were discussed from the view point of crystallite size effects and microstrains induced by mechanical activation. A systematic study of Raman responses indicates that mechanical activation has a distinct influence on BaTiO3 lattice spectra affecting the intensity, width, and position of Raman modes. The measured Raman spectra were deconvoluted and phonon parameters were estimated. It has been established that applied mechanical activation leads to a significant decrease in the mean crystallites size, but nevertheless enables formation of tetragonal nanocrystalline BaTiO3.
PB  - Wiley, Hoboken
T2  - Journal of the American Ceramic Society
T1  - Raman Responses in Mechanically Activated BaTiO3
EP  - 608
IS  - 2
SP  - 601
VL  - 97
DO  - 10.1111/jace.12423
ER  - 
@article{
author = "Pavlović, Vera P. and Nikolić, Maria V. and Pavlović, Vladimir and Blanusa, Jovan and Stevanović, Suzana and Mitić, Vojislav V. and Scepanović, Maja and Vlahović, Branislav",
year = "2014",
abstract = "The structure and lattice dynamics of mechanically activated BaTiO3 was investigated in this study. Phonon behavior and crystal structure stability of the obtained nanocrystalline BaTiO3 were discussed from the view point of crystallite size effects and microstrains induced by mechanical activation. A systematic study of Raman responses indicates that mechanical activation has a distinct influence on BaTiO3 lattice spectra affecting the intensity, width, and position of Raman modes. The measured Raman spectra were deconvoluted and phonon parameters were estimated. It has been established that applied mechanical activation leads to a significant decrease in the mean crystallites size, but nevertheless enables formation of tetragonal nanocrystalline BaTiO3.",
publisher = "Wiley, Hoboken",
journal = "Journal of the American Ceramic Society",
title = "Raman Responses in Mechanically Activated BaTiO3",
pages = "608-601",
number = "2",
volume = "97",
doi = "10.1111/jace.12423"
}
Pavlović, V. P., Nikolić, M. V., Pavlović, V., Blanusa, J., Stevanović, S., Mitić, V. V., Scepanović, M.,& Vlahović, B.. (2014). Raman Responses in Mechanically Activated BaTiO3. in Journal of the American Ceramic Society
Wiley, Hoboken., 97(2), 601-608.
https://doi.org/10.1111/jace.12423
Pavlović VP, Nikolić MV, Pavlović V, Blanusa J, Stevanović S, Mitić VV, Scepanović M, Vlahović B. Raman Responses in Mechanically Activated BaTiO3. in Journal of the American Ceramic Society. 2014;97(2):601-608.
doi:10.1111/jace.12423 .
Pavlović, Vera P., Nikolić, Maria V., Pavlović, Vladimir, Blanusa, Jovan, Stevanović, Suzana, Mitić, Vojislav V., Scepanović, Maja, Vlahović, Branislav, "Raman Responses in Mechanically Activated BaTiO3" in Journal of the American Ceramic Society, 97, no. 2 (2014):601-608,
https://doi.org/10.1111/jace.12423 . .
19
15
21

Structural investigation of mechanically activated nanocrystalline BaTiO3 powders

Pavlović, Vera P.; Krstić, J.; Scepanović, M.J.; Dojcilović, J.; Minić, Dragica M.; Blanusa, J.; Stevanović, S.; Mitić, V.; Pavlović, Vladimir

(Elsevier Sci Ltd, Oxford, 2011)

TY  - JOUR
AU  - Pavlović, Vera P.
AU  - Krstić, J.
AU  - Scepanović, M.J.
AU  - Dojcilović, J.
AU  - Minić, Dragica M.
AU  - Blanusa, J.
AU  - Stevanović, S.
AU  - Mitić, V.
AU  - Pavlović, Vladimir
PY  - 2011
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/2668
AB  - In this article, in order to obtain tetragonal nanocrystalline BaTiO3, structural investigations of mechanically activated BaTiO3 powder have been performed. A mercury porosimetry analysis and scanning electron microscopy method have been applied for determination of the specific pore volume, porosity and microstructure morphology of the samples. The lattice vibration spectra of nonactivated and activated powders, their phase composition, lattice microstrains and the mean size of coherently diffracting domains were examined by Raman spectroscopy and the X-ray powder diffraction method. The average crystal structure of obtained nanocrystalline powders, estimated from X-ray diffraction data, gave evidence of retained, but slightly sustained tetragonality of powders, even for particles as small as similar to 30 nm. Raman spectroscopy also gave clear evidence for local tetragonal symmetries, in particular through the presence of a band at similar to 307 cm(-1).
PB  - Elsevier Sci Ltd, Oxford
T2  - Ceramics International
T1  - Structural investigation of mechanically activated nanocrystalline BaTiO3 powders
EP  - 2518
IS  - 7
SP  - 2513
VL  - 37
DO  - 10.1016/j.ceramint.2011.03.064
ER  - 
@article{
author = "Pavlović, Vera P. and Krstić, J. and Scepanović, M.J. and Dojcilović, J. and Minić, Dragica M. and Blanusa, J. and Stevanović, S. and Mitić, V. and Pavlović, Vladimir",
year = "2011",
abstract = "In this article, in order to obtain tetragonal nanocrystalline BaTiO3, structural investigations of mechanically activated BaTiO3 powder have been performed. A mercury porosimetry analysis and scanning electron microscopy method have been applied for determination of the specific pore volume, porosity and microstructure morphology of the samples. The lattice vibration spectra of nonactivated and activated powders, their phase composition, lattice microstrains and the mean size of coherently diffracting domains were examined by Raman spectroscopy and the X-ray powder diffraction method. The average crystal structure of obtained nanocrystalline powders, estimated from X-ray diffraction data, gave evidence of retained, but slightly sustained tetragonality of powders, even for particles as small as similar to 30 nm. Raman spectroscopy also gave clear evidence for local tetragonal symmetries, in particular through the presence of a band at similar to 307 cm(-1).",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Ceramics International",
title = "Structural investigation of mechanically activated nanocrystalline BaTiO3 powders",
pages = "2518-2513",
number = "7",
volume = "37",
doi = "10.1016/j.ceramint.2011.03.064"
}
Pavlović, V. P., Krstić, J., Scepanović, M.J., Dojcilović, J., Minić, D. M., Blanusa, J., Stevanović, S., Mitić, V.,& Pavlović, V.. (2011). Structural investigation of mechanically activated nanocrystalline BaTiO3 powders. in Ceramics International
Elsevier Sci Ltd, Oxford., 37(7), 2513-2518.
https://doi.org/10.1016/j.ceramint.2011.03.064
Pavlović VP, Krstić J, Scepanović M, Dojcilović J, Minić DM, Blanusa J, Stevanović S, Mitić V, Pavlović V. Structural investigation of mechanically activated nanocrystalline BaTiO3 powders. in Ceramics International. 2011;37(7):2513-2518.
doi:10.1016/j.ceramint.2011.03.064 .
Pavlović, Vera P., Krstić, J., Scepanović, M.J., Dojcilović, J., Minić, Dragica M., Blanusa, J., Stevanović, S., Mitić, V., Pavlović, Vladimir, "Structural investigation of mechanically activated nanocrystalline BaTiO3 powders" in Ceramics International, 37, no. 7 (2011):2513-2518,
https://doi.org/10.1016/j.ceramint.2011.03.064 . .
15
16
17

The influence of tribophysical activation on non-isothermal sintering of BaTiO3 ceramics

Pavlović, Vera P.; Nikolić, M.V.; Spasojević, V.; Blanusa, J.; Zivković, Lj.; Stojanović, B.D.; Pavlović, Vladimir; Ristić, M.M.

(Trans Tech Publications Ltd, Durnten-Zurich, 2006)

TY  - CONF
AU  - Pavlović, Vera P.
AU  - Nikolić, M.V.
AU  - Spasojević, V.
AU  - Blanusa, J.
AU  - Zivković, Lj.
AU  - Stojanović, B.D.
AU  - Pavlović, Vladimir
AU  - Ristić, M.M.
PY  - 2006
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/1340
AB  - In this paper the influence of tribophysical activation on non-isothermal sintering of barium titanate has been investigated. BaTiO3 Powders were tribophysically activated in a planetary ball mill for 0, 60 and 120 min., pressed and non-isothermally sintered up to 1380 degrees C. Dilatometric analysis was performed in air in the temperature range from room temperature to 1380 degrees C with heating rates of 10, 20 and 30 degrees C/min. The samples were analyzed by the X-ray powder diffraction method. Investigation of the morphology of microstructure constituents was performed using the scanning electron microsocopy method. With the purpose of optimizing technological parameters the results obtained by microstructure analysis were correlated with the results of quantitative dilatometric analysis.
PB  - Trans Tech Publications Ltd, Durnten-Zurich
C3  - Materials Science Forum
T1  - The influence of tribophysical activation on non-isothermal sintering of BaTiO3 ceramics
EP  - 1570
SP  - 1566
VL  - 514-516
DO  - 10.4028/www.scientific.net/MSF.514-516.1566
ER  - 
@conference{
author = "Pavlović, Vera P. and Nikolić, M.V. and Spasojević, V. and Blanusa, J. and Zivković, Lj. and Stojanović, B.D. and Pavlović, Vladimir and Ristić, M.M.",
year = "2006",
abstract = "In this paper the influence of tribophysical activation on non-isothermal sintering of barium titanate has been investigated. BaTiO3 Powders were tribophysically activated in a planetary ball mill for 0, 60 and 120 min., pressed and non-isothermally sintered up to 1380 degrees C. Dilatometric analysis was performed in air in the temperature range from room temperature to 1380 degrees C with heating rates of 10, 20 and 30 degrees C/min. The samples were analyzed by the X-ray powder diffraction method. Investigation of the morphology of microstructure constituents was performed using the scanning electron microsocopy method. With the purpose of optimizing technological parameters the results obtained by microstructure analysis were correlated with the results of quantitative dilatometric analysis.",
publisher = "Trans Tech Publications Ltd, Durnten-Zurich",
journal = "Materials Science Forum",
title = "The influence of tribophysical activation on non-isothermal sintering of BaTiO3 ceramics",
pages = "1570-1566",
volume = "514-516",
doi = "10.4028/www.scientific.net/MSF.514-516.1566"
}
Pavlović, V. P., Nikolić, M.V., Spasojević, V., Blanusa, J., Zivković, Lj., Stojanović, B.D., Pavlović, V.,& Ristić, M.M.. (2006). The influence of tribophysical activation on non-isothermal sintering of BaTiO3 ceramics. in Materials Science Forum
Trans Tech Publications Ltd, Durnten-Zurich., 514-516, 1566-1570.
https://doi.org/10.4028/www.scientific.net/MSF.514-516.1566
Pavlović VP, Nikolić M, Spasojević V, Blanusa J, Zivković L, Stojanović B, Pavlović V, Ristić M. The influence of tribophysical activation on non-isothermal sintering of BaTiO3 ceramics. in Materials Science Forum. 2006;514-516:1566-1570.
doi:10.4028/www.scientific.net/MSF.514-516.1566 .
Pavlović, Vera P., Nikolić, M.V., Spasojević, V., Blanusa, J., Zivković, Lj., Stojanović, B.D., Pavlović, Vladimir, Ristić, M.M., "The influence of tribophysical activation on non-isothermal sintering of BaTiO3 ceramics" in Materials Science Forum, 514-516 (2006):1566-1570,
https://doi.org/10.4028/www.scientific.net/MSF.514-516.1566 . .
1