TY  - JOUR
AU  - Nikolić, Nebojša D.
AU  - Popov, Konstantin I.
AU  - Ivanović, Evica
AU  - Branković, Goran
AU  - Stevanović, Sanja I.
AU  - Zivković, Predrag M.
PY  - 2015
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/3828
AB  - Electrodeposition of lead from the concentrated nitrate electrolyte in the potentiostatic regime of electrolysis has been investigated by the analysis of the potentiostatic current transients and scanning electron microscope (SEM). It was found that the process of Pb nucleation from the concentrated electrolyte follows Scharifker model based on the 3D (three-dimensional) instantaneous nucleation with diffusion-controlled growth. The deviations of the obtained dependencies from the theoretical prediction for this model have been also discussed. Needle-like and fern-like dendrites, as well as crystals of irregular shape (precursors of dendrites) were formed in the diffusion controlled electrodeposition. The SEM analysis of these dendritic forms revealed their 2D (two-dimensional) growth. The size of needle-like dendrites was considerably larger than the size of both the fern-like dendrites and the irregular crystals. Although the electrodeposition process occurred inside the linear diffusion layer of the macroelectrode, the shape and size of dendrites were determined by the effect of local diffusion fields formed around tips (spherical diffusion) and top edges (cylindrical diffusion) of protrusions formed in the initial stage of the electrodeposition. The growth rates under the conditions of spherical and cylindrical diffusion control were mutually compared and a faster growth under the conditions of the spherical, in relation to the cylindrical diffusion, was proved. The effect of the current density distribution on formation of the final forms of Pb dendrites was also discussed.
PB  - Elsevier Science Sa, Lausanne
T2  - Journal of Electroanalytical Chemistry
T1  - The potentiostatic current transients and the role of local diffusion fields in formation of the 2D lead dendrites from the concentrated electrolyte
EP  - 148
SP  - 137
VL  - 739
DO  - 10.1016/j.jelechem.2014.12.020
ER  - 

@article{
author = "Nikolić, Nebojša D. and Popov, Konstantin I. and Ivanović, Evica and Branković, Goran and Stevanović, Sanja I. and Zivković, Predrag M.",
year = "2015",
abstract = "Electrodeposition of lead from the concentrated nitrate electrolyte in the potentiostatic regime of electrolysis has been investigated by the analysis of the potentiostatic current transients and scanning electron microscope (SEM). It was found that the process of Pb nucleation from the concentrated electrolyte follows Scharifker model based on the 3D (three-dimensional) instantaneous nucleation with diffusion-controlled growth. The deviations of the obtained dependencies from the theoretical prediction for this model have been also discussed. Needle-like and fern-like dendrites, as well as crystals of irregular shape (precursors of dendrites) were formed in the diffusion controlled electrodeposition. The SEM analysis of these dendritic forms revealed their 2D (two-dimensional) growth. The size of needle-like dendrites was considerably larger than the size of both the fern-like dendrites and the irregular crystals. Although the electrodeposition process occurred inside the linear diffusion layer of the macroelectrode, the shape and size of dendrites were determined by the effect of local diffusion fields formed around tips (spherical diffusion) and top edges (cylindrical diffusion) of protrusions formed in the initial stage of the electrodeposition. The growth rates under the conditions of spherical and cylindrical diffusion control were mutually compared and a faster growth under the conditions of the spherical, in relation to the cylindrical diffusion, was proved. The effect of the current density distribution on formation of the final forms of Pb dendrites was also discussed.",
publisher = "Elsevier Science Sa, Lausanne",
journal = "Journal of Electroanalytical Chemistry",
title = "The potentiostatic current transients and the role of local diffusion fields in formation of the 2D lead dendrites from the concentrated electrolyte",
pages = "148-137",
volume = "739",
doi = "10.1016/j.jelechem.2014.12.020"
}

Nikolić, N. D., Popov, K. I., Ivanović, E., Branković, G., Stevanović, S. I.,& Zivković, P. M.. (2015). The potentiostatic current transients and the role of local diffusion fields in formation of the 2D lead dendrites from the concentrated electrolyte. in Journal of Electroanalytical Chemistry
Elsevier Science Sa, Lausanne., 739, 137-148.
https://doi.org/10.1016/j.jelechem.2014.12.020

Nikolić ND, Popov KI, Ivanović E, Branković G, Stevanović SI, Zivković PM. The potentiostatic current transients and the role of local diffusion fields in formation of the 2D lead dendrites from the concentrated electrolyte. in Journal of Electroanalytical Chemistry. 2015;739:137-148.
doi:10.1016/j.jelechem.2014.12.020 .

Nikolić, Nebojša D., Popov, Konstantin I., Ivanović, Evica, Branković, Goran, Stevanović, Sanja I., Zivković, Predrag M., "The potentiostatic current transients and the role of local diffusion fields in formation of the 2D lead dendrites from the concentrated electrolyte" in Journal of Electroanalytical Chemistry, 739 (2015):137-148,
https://doi.org/10.1016/j.jelechem.2014.12.020 . .

TY  - JOUR
AU  - Nikolić, Nebojša D.
AU  - Popov, Konstantin I.
AU  - Ivanović, Evica
AU  - Branković, Goran
PY  - 2014
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/3394
AB  - The processes of Pb electrodeposition under diffusion control were examined by scanning electron microscopy (SEM) of the formed crystals. The orientation of grains of hexagonal shape formed in the initial stage of electrodeposition strongly affected the final morphology of the Pb crystals. The formation of Pb crystals of the different shape from the same initial shape was discussed in terms of the effect of orientation of initially formed grains on the type of diffusion control. A spherical diffusion layer was formed around the tip of the hexagonal-shaped grain oriented with its tip towards the bulk solution that led to the formation of elongated crystals in the growth process. On the other hand, a cylindrical type of diffusion was responsible for the growth of hexagonal-shaped grains oriented with the lateral side towards the bulk solution. Pb crystals with well-defined sides parallel to the surface area of the macroelectrode were formed under this type of diffusion.
PB  - Srpsko hemijsko društvo, Beograd
T2  - JOURNAL OF THE SERBIAN CHEMICAL SOCIETY
T1  - Effect of the orientation of the initially formed grains on the final morphology of electrodeposited lead
EP  - 1005
IS  - 8
SP  - 993
VL  - 79
DO  - 10.2298/JSC131211006N
ER  - 

@article{
author = "Nikolić, Nebojša D. and Popov, Konstantin I. and Ivanović, Evica and Branković, Goran",
year = "2014",
abstract = "The processes of Pb electrodeposition under diffusion control were examined by scanning electron microscopy (SEM) of the formed crystals. The orientation of grains of hexagonal shape formed in the initial stage of electrodeposition strongly affected the final morphology of the Pb crystals. The formation of Pb crystals of the different shape from the same initial shape was discussed in terms of the effect of orientation of initially formed grains on the type of diffusion control. A spherical diffusion layer was formed around the tip of the hexagonal-shaped grain oriented with its tip towards the bulk solution that led to the formation of elongated crystals in the growth process. On the other hand, a cylindrical type of diffusion was responsible for the growth of hexagonal-shaped grains oriented with the lateral side towards the bulk solution. Pb crystals with well-defined sides parallel to the surface area of the macroelectrode were formed under this type of diffusion.",
publisher = "Srpsko hemijsko društvo, Beograd",
journal = "JOURNAL OF THE SERBIAN CHEMICAL SOCIETY",
title = "Effect of the orientation of the initially formed grains on the final morphology of electrodeposited lead",
pages = "1005-993",
number = "8",
volume = "79",
doi = "10.2298/JSC131211006N"
}

Nikolić, N. D., Popov, K. I., Ivanović, E.,& Branković, G.. (2014). Effect of the orientation of the initially formed grains on the final morphology of electrodeposited lead. in JOURNAL OF THE SERBIAN CHEMICAL SOCIETY
Srpsko hemijsko društvo, Beograd., 79(8), 993-1005.
https://doi.org/10.2298/JSC131211006N

Nikolić ND, Popov KI, Ivanović E, Branković G. Effect of the orientation of the initially formed grains on the final morphology of electrodeposited lead. in JOURNAL OF THE SERBIAN CHEMICAL SOCIETY. 2014;79(8):993-1005.
doi:10.2298/JSC131211006N .

Nikolić, Nebojša D., Popov, Konstantin I., Ivanović, Evica, Branković, Goran, "Effect of the orientation of the initially formed grains on the final morphology of electrodeposited lead" in JOURNAL OF THE SERBIAN CHEMICAL SOCIETY, 79, no. 8 (2014):993-1005,
https://doi.org/10.2298/JSC131211006N . .

TY  - CONF
AU  - Pavlović, MG
AU  - Popov, Konstantin I.
AU  - Krstić, Snežana B.
AU  - Pavlović, Ljubica
AU  - Ivanović, Evica
PY  - 2005
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/875
AB  - The surface structure of powder particles, which allows free flow of copper powder, was examined. It has been shown that a sufficiently dense surface structure which permits free flow will be obtained if apparent density is higher than 2.2 - 2.3 g/cm(3). Such a surface structure can be obtained by reversing current electrodeposition of powder at considerably lower apparent densities of powder due to selective dissolution of subparticles during anodic time of reversing current wave. The surface structure of copper powder particles is discussed and correlated with the lowest apparent density at which the copper powder can still flow.
PB  - 6th Conference of the Yugoslav Materials Research Society, YUCOMAT VI: Current Research in Advanced Materials and Processes
C3  - Materials Science Forum
T1  - Flowability of electrolytic copper powder
EP  - 252
SP  - 247
VL  - 494
DO  - 10.4028/0-87849-971-7.247
ER  - 

@conference{
author = "Pavlović, MG and Popov, Konstantin I. and Krstić, Snežana B. and Pavlović, Ljubica and Ivanović, Evica",
year = "2005",
abstract = "The surface structure of powder particles, which allows free flow of copper powder, was examined. It has been shown that a sufficiently dense surface structure which permits free flow will be obtained if apparent density is higher than 2.2 - 2.3 g/cm(3). Such a surface structure can be obtained by reversing current electrodeposition of powder at considerably lower apparent densities of powder due to selective dissolution of subparticles during anodic time of reversing current wave. The surface structure of copper powder particles is discussed and correlated with the lowest apparent density at which the copper powder can still flow.",
publisher = "6th Conference of the Yugoslav Materials Research Society, YUCOMAT VI: Current Research in Advanced Materials and Processes",
journal = "Materials Science Forum",
title = "Flowability of electrolytic copper powder",
pages = "252-247",
volume = "494",
doi = "10.4028/0-87849-971-7.247"
}

Pavlović, M., Popov, K. I., Krstić, S. B., Pavlović, L.,& Ivanović, E.. (2005). Flowability of electrolytic copper powder. in Materials Science Forum
6th Conference of the Yugoslav Materials Research Society, YUCOMAT VI: Current Research in Advanced Materials and Processes., 494, 247-252.
https://doi.org/10.4028/0-87849-971-7.247

Pavlović M, Popov KI, Krstić SB, Pavlović L, Ivanović E. Flowability of electrolytic copper powder. in Materials Science Forum. 2005;494:247-252.
doi:10.4028/0-87849-971-7.247 .

Pavlović, MG, Popov, Konstantin I., Krstić, Snežana B., Pavlović, Ljubica, Ivanović, Evica, "Flowability of electrolytic copper powder" in Materials Science Forum, 494 (2005):247-252,
https://doi.org/10.4028/0-87849-971-7.247 . .

TY  - CONF
AU  - Popov, Konstantin I.
AU  - Pavlović, MG
AU  - Pavlović, Ljubica
AU  - Maksimović, VM
AU  - Ivanović, Evica
PY  - 2004
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/805
AB  - The apparent density and flowability of copper powder are related to the structure of powder particles and the reversing current (RC) regimes. It was shown that the apparent density of the powders increases with the increase in the compactness of particles, hence with the increase in the frequency of RC and with the decrease in the cathodic to anodic time ratio.
PB  - Trans Tech Publications Ltd, Durnten-Zurich
C3  - Progress in Advanced Materials and Processes
T1  - The effect of reversing current on the properties of copper and electrolytic copper powder II. The apparent density and flowability of powders
EP  - 404
SP  - 399
VL  - 453-454
DO  - 10.4028/www.scientific.net/MSF.453-454.399
ER  - 

@conference{
author = "Popov, Konstantin I. and Pavlović, MG and Pavlović, Ljubica and Maksimović, VM and Ivanović, Evica",
year = "2004",
abstract = "The apparent density and flowability of copper powder are related to the structure of powder particles and the reversing current (RC) regimes. It was shown that the apparent density of the powders increases with the increase in the compactness of particles, hence with the increase in the frequency of RC and with the decrease in the cathodic to anodic time ratio.",
publisher = "Trans Tech Publications Ltd, Durnten-Zurich",
journal = "Progress in Advanced Materials and Processes",
title = "The effect of reversing current on the properties of copper and electrolytic copper powder II. The apparent density and flowability of powders",
pages = "404-399",
volume = "453-454",
doi = "10.4028/www.scientific.net/MSF.453-454.399"
}

Popov, K. I., Pavlović, M., Pavlović, L., Maksimović, V.,& Ivanović, E.. (2004). The effect of reversing current on the properties of copper and electrolytic copper powder II. The apparent density and flowability of powders. in Progress in Advanced Materials and Processes
Trans Tech Publications Ltd, Durnten-Zurich., 453-454, 399-404.
https://doi.org/10.4028/www.scientific.net/MSF.453-454.399

Popov KI, Pavlović M, Pavlović L, Maksimović V, Ivanović E. The effect of reversing current on the properties of copper and electrolytic copper powder II. The apparent density and flowability of powders. in Progress in Advanced Materials and Processes. 2004;453-454:399-404.
doi:10.4028/www.scientific.net/MSF.453-454.399 .

Popov, Konstantin I., Pavlović, MG, Pavlović, Ljubica, Maksimović, VM, Ivanović, Evica, "The effect of reversing current on the properties of copper and electrolytic copper powder II. The apparent density and flowability of powders" in Progress in Advanced Materials and Processes, 453-454 (2004):399-404,
https://doi.org/10.4028/www.scientific.net/MSF.453-454.399 . .

TY  - JOUR
AU  - Popov, Konstantin I.
AU  - Krstić, Snežana B.
AU  - Obradović, Milutin Č.
AU  - Pavlović, Miomir G.
AU  - Pavlović, Ljubica
AU  - Ivanović, Evica
PY  - 2004
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/817
AB  - The structure of the surface of copper powder particles is discussed and correlated with the lowest apparent density at which copper powder can still flow. It is shown that such structures can be easily obtained in the electrodeposition of powders in reversing current regimes.
AB  - Razmatrana je struktura površine čestica bakarnog praha i korelisana s najmanjom nasipnom masom pri kojoj bakarni prah još uvek može da teče. Pokazano je da se takva struktura može lako dobiti elektrohemijskim taloženjem praha u režimu reversne struje.
PB  - Srpsko hemijsko društvo, Beograd
T2  - JOURNAL OF THE SERBIAN CHEMICAL SOCIETY
T1  - The effect of the particle shape and structure on the flowability of electrolytic copper powder, III: A model of the surface of a representative particle of flowing copper powder electrodeposited by reversing current
T1  - Uticaj oblika I strukture čestica na tečljivost elektrolitičkog bakarnog praha III - model površine reprezentativne čestice tečljivog bakarnog praha dobijenog elektohemijskim taloženjem reversnom strujom
EP  - 51
IS  - 1
SP  - 43
VL  - 69
DO  - 10.2298/JSC0401043P
ER  - 

@article{
author = "Popov, Konstantin I. and Krstić, Snežana B. and Obradović, Milutin Č. and Pavlović, Miomir G. and Pavlović, Ljubica and Ivanović, Evica",
year = "2004",
abstract = "The structure of the surface of copper powder particles is discussed and correlated with the lowest apparent density at which copper powder can still flow. It is shown that such structures can be easily obtained in the electrodeposition of powders in reversing current regimes., Razmatrana je struktura površine čestica bakarnog praha i korelisana s najmanjom nasipnom masom pri kojoj bakarni prah još uvek može da teče. Pokazano je da se takva struktura može lako dobiti elektrohemijskim taloženjem praha u režimu reversne struje.",
publisher = "Srpsko hemijsko društvo, Beograd",
journal = "JOURNAL OF THE SERBIAN CHEMICAL SOCIETY",
title = "The effect of the particle shape and structure on the flowability of electrolytic copper powder, III: A model of the surface of a representative particle of flowing copper powder electrodeposited by reversing current, Uticaj oblika I strukture čestica na tečljivost elektrolitičkog bakarnog praha III - model površine reprezentativne čestice tečljivog bakarnog praha dobijenog elektohemijskim taloženjem reversnom strujom",
pages = "51-43",
number = "1",
volume = "69",
doi = "10.2298/JSC0401043P"
}

Popov, K. I., Krstić, S. B., Obradović, M. Č., Pavlović, M. G., Pavlović, L.,& Ivanović, E.. (2004). The effect of the particle shape and structure on the flowability of electrolytic copper powder, III: A model of the surface of a representative particle of flowing copper powder electrodeposited by reversing current. in JOURNAL OF THE SERBIAN CHEMICAL SOCIETY
Srpsko hemijsko društvo, Beograd., 69(1), 43-51.
https://doi.org/10.2298/JSC0401043P

Popov KI, Krstić SB, Obradović MČ, Pavlović MG, Pavlović L, Ivanović E. The effect of the particle shape and structure on the flowability of electrolytic copper powder, III: A model of the surface of a representative particle of flowing copper powder electrodeposited by reversing current. in JOURNAL OF THE SERBIAN CHEMICAL SOCIETY. 2004;69(1):43-51.
doi:10.2298/JSC0401043P .

Popov, Konstantin I., Krstić, Snežana B., Obradović, Milutin Č., Pavlović, Miomir G., Pavlović, Ljubica, Ivanović, Evica, "The effect of the particle shape and structure on the flowability of electrolytic copper powder, III: A model of the surface of a representative particle of flowing copper powder electrodeposited by reversing current" in JOURNAL OF THE SERBIAN CHEMICAL SOCIETY, 69, no. 1 (2004):43-51,
https://doi.org/10.2298/JSC0401043P . .

TY  - CONF
AU  - Pavlović, MG
AU  - Popov, Konstantin I.
AU  - Pavlović, Ljubica
AU  - Ivanović, Evica
AU  - Jović, VD
PY  - 2004
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/813
AB  - The selective dissolution of copper dendrites during electrodeposition by reversing current was discussed and the effects on the morphology of copper powder particles were elucidated.
PB  - Trans Tech Publications Ltd, Durnten-Zurich
C3  - Progress in Advanced Materials and Processes
T1  - The effect of reversing current on the properties of copper and electrolytic copper powder. I. The morphology of powder particles
EP  - 398
SP  - 393
VL  - 453-454
DO  - 10.4028/www.scientific.net/MSF.453-454.393
ER  - 

@conference{
author = "Pavlović, MG and Popov, Konstantin I. and Pavlović, Ljubica and Ivanović, Evica and Jović, VD",
year = "2004",
abstract = "The selective dissolution of copper dendrites during electrodeposition by reversing current was discussed and the effects on the morphology of copper powder particles were elucidated.",
publisher = "Trans Tech Publications Ltd, Durnten-Zurich",
journal = "Progress in Advanced Materials and Processes",
title = "The effect of reversing current on the properties of copper and electrolytic copper powder. I. The morphology of powder particles",
pages = "398-393",
volume = "453-454",
doi = "10.4028/www.scientific.net/MSF.453-454.393"
}

Pavlović, M., Popov, K. I., Pavlović, L., Ivanović, E.,& Jović, V.. (2004). The effect of reversing current on the properties of copper and electrolytic copper powder. I. The morphology of powder particles. in Progress in Advanced Materials and Processes
Trans Tech Publications Ltd, Durnten-Zurich., 453-454, 393-398.
https://doi.org/10.4028/www.scientific.net/MSF.453-454.393

Pavlović M, Popov KI, Pavlović L, Ivanović E, Jović V. The effect of reversing current on the properties of copper and electrolytic copper powder. I. The morphology of powder particles. in Progress in Advanced Materials and Processes. 2004;453-454:393-398.
doi:10.4028/www.scientific.net/MSF.453-454.393 .

Pavlović, MG, Popov, Konstantin I., Pavlović, Ljubica, Ivanović, Evica, Jović, VD, "The effect of reversing current on the properties of copper and electrolytic copper powder. I. The morphology of powder particles" in Progress in Advanced Materials and Processes, 453-454 (2004):393-398,
https://doi.org/10.4028/www.scientific.net/MSF.453-454.393 . .

TY  - JOUR
AU  - Popov, Konstantin I.
AU  - Pavlović, Miomir G.
AU  - Pavlović, Ljubica
AU  - Ivanović, Evica
AU  - Krstić, Snežana B.
AU  - Obradović, Milutin Č.
PY  - 2003
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/598
AB  - An analysis of the effects of the shape, surface structure and size distribution of particles on the flow ability of the copper powder was performed. It is shown that the most important property of the particles of a powder, regarding the flow ability of the powder, is the surface structure of the particles.
AB  - Izvedena je analiza uticaja oblika, površinske strukture i raspodele veličina čestica na tečljivost bakarnog praha. Pokazano je da površinska struktura predstavlja najvažnije svojstvo čestice praha u odnosu na njegovu tečljivost.
PB  - Srpsko hemijsko društvo, Beograd
T2  - JOURNAL OF THE SERBIAN CHEMICAL SOCIETY
T1  - The effect of the particle shape and structure on the flow ability of electrolytic copper powder II: The experimental verification of the model of the representative powder particle
T1  - Uticaj oblika i strukture čestica na tečljivost elektrolitičkog bakarnog praha II - eksperimentalna potvrda modela reprezentativne čestice praha
EP  - 783
IS  - 10
SP  - 779
VL  - 68
DO  - 10.2298/JSC0310779P
ER  - 

@article{
author = "Popov, Konstantin I. and Pavlović, Miomir G. and Pavlović, Ljubica and Ivanović, Evica and Krstić, Snežana B. and Obradović, Milutin Č.",
year = "2003",
abstract = "An analysis of the effects of the shape, surface structure and size distribution of particles on the flow ability of the copper powder was performed. It is shown that the most important property of the particles of a powder, regarding the flow ability of the powder, is the surface structure of the particles., Izvedena je analiza uticaja oblika, površinske strukture i raspodele veličina čestica na tečljivost bakarnog praha. Pokazano je da površinska struktura predstavlja najvažnije svojstvo čestice praha u odnosu na njegovu tečljivost.",
publisher = "Srpsko hemijsko društvo, Beograd",
journal = "JOURNAL OF THE SERBIAN CHEMICAL SOCIETY",
title = "The effect of the particle shape and structure on the flow ability of electrolytic copper powder II: The experimental verification of the model of the representative powder particle, Uticaj oblika i strukture čestica na tečljivost elektrolitičkog bakarnog praha II - eksperimentalna potvrda modela reprezentativne čestice praha",
pages = "783-779",
number = "10",
volume = "68",
doi = "10.2298/JSC0310779P"
}

Popov, K. I., Pavlović, M. G., Pavlović, L., Ivanović, E., Krstić, S. B.,& Obradović, M. Č.. (2003). The effect of the particle shape and structure on the flow ability of electrolytic copper powder II: The experimental verification of the model of the representative powder particle. in JOURNAL OF THE SERBIAN CHEMICAL SOCIETY
Srpsko hemijsko društvo, Beograd., 68(10), 779-783.
https://doi.org/10.2298/JSC0310779P

Popov KI, Pavlović MG, Pavlović L, Ivanović E, Krstić SB, Obradović MČ. The effect of the particle shape and structure on the flow ability of electrolytic copper powder II: The experimental verification of the model of the representative powder particle. in JOURNAL OF THE SERBIAN CHEMICAL SOCIETY. 2003;68(10):779-783.
doi:10.2298/JSC0310779P .

Popov, Konstantin I., Pavlović, Miomir G., Pavlović, Ljubica, Ivanović, Evica, Krstić, Snežana B., Obradović, Milutin Č., "The effect of the particle shape and structure on the flow ability of electrolytic copper powder II: The experimental verification of the model of the representative powder particle" in JOURNAL OF THE SERBIAN CHEMICAL SOCIETY, 68, no. 10 (2003):779-783,
https://doi.org/10.2298/JSC0310779P . .

TY  - JOUR
AU  - Popov, Konstantin I.
AU  - Krstić, Snežana B.
AU  - Obradović, Milutin Č.
AU  - Pavlović, Miomir G.
AU  - Pavlović, Ljubica
AU  - Ivanović, Evica
PY  - 2003
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/649
AB  - One of the most important properties of copper powder is its flow ability which depends on the shape and the structure of the powder particles. A procedure for the determination of a representative powder particle permitting the free flow of copper powder is proposed.
AB  - Jedno od najvažnijih svojstava bakarnog praha je njegova tečljivost, koja zavisi od oblika i strukture čestica praha. Predložen je postupak za određivanje reprezentativne čestice praha koja obezbeđuje slobodno tečenje bakarnog praha.
PB  - Srpsko hemijsko društvo, Beograd
T2  - Journal of the Serbian Chemical Society
T1  - The effect of the particle shape and structure on the flowability of electrolytic copper powder I: Modeling of a representative powder particle
T1  - Uticaj oblika i strukture čestica na tečljivost elektrolitičkog bakarnog praha I - modelovanje reprezentativne čestice praha
EP  - 778
IS  - 10
SP  - 771
VL  - 68
UR  - https://hdl.handle.net/21.15107/rcub_agrospace_649
ER  - 

@article{
author = "Popov, Konstantin I. and Krstić, Snežana B. and Obradović, Milutin Č. and Pavlović, Miomir G. and Pavlović, Ljubica and Ivanović, Evica",
year = "2003",
abstract = "One of the most important properties of copper powder is its flow ability which depends on the shape and the structure of the powder particles. A procedure for the determination of a representative powder particle permitting the free flow of copper powder is proposed., Jedno od najvažnijih svojstava bakarnog praha je njegova tečljivost, koja zavisi od oblika i strukture čestica praha. Predložen je postupak za određivanje reprezentativne čestice praha koja obezbeđuje slobodno tečenje bakarnog praha.",
publisher = "Srpsko hemijsko društvo, Beograd",
journal = "Journal of the Serbian Chemical Society",
title = "The effect of the particle shape and structure on the flowability of electrolytic copper powder I: Modeling of a representative powder particle, Uticaj oblika i strukture čestica na tečljivost elektrolitičkog bakarnog praha I - modelovanje reprezentativne čestice praha",
pages = "778-771",
number = "10",
volume = "68",
url = "https://hdl.handle.net/21.15107/rcub_agrospace_649"
}

Popov, K. I., Krstić, S. B., Obradović, M. Č., Pavlović, M. G., Pavlović, L.,& Ivanović, E.. (2003). The effect of the particle shape and structure on the flowability of electrolytic copper powder I: Modeling of a representative powder particle. in Journal of the Serbian Chemical Society
Srpsko hemijsko društvo, Beograd., 68(10), 771-778.
https://hdl.handle.net/21.15107/rcub_agrospace_649

Popov KI, Krstić SB, Obradović MČ, Pavlović MG, Pavlović L, Ivanović E. The effect of the particle shape and structure on the flowability of electrolytic copper powder I: Modeling of a representative powder particle. in Journal of the Serbian Chemical Society. 2003;68(10):771-778.
https://hdl.handle.net/21.15107/rcub_agrospace_649 .

Popov, Konstantin I., Krstić, Snežana B., Obradović, Milutin Č., Pavlović, Miomir G., Pavlović, Ljubica, Ivanović, Evica, "The effect of the particle shape and structure on the flowability of electrolytic copper powder I: Modeling of a representative powder particle" in Journal of the Serbian Chemical Society, 68, no. 10 (2003):771-778,
https://hdl.handle.net/21.15107/rcub_agrospace_649 .

TY  - JOUR
AU  - Popov, Konstantin I.
AU  - Krstić, Snežana B.
AU  - Obradović, MC
AU  - Pavlović, MG
AU  - Pavlović, Ljubica
AU  - Ivanović, Evica
PY  - 2003
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/605
AB  - One of the most important properties of copper powder is its flowability which depends on the shape and the structure of the powder particles. A procedure for the determination of a representative powder particle permitting the free flow of copper powder is proposed.
PB  - Srpsko hemijsko društvo, Beograd
T2  - JOURNAL OF THE SERBIAN CHEMICAL SOCIETY
T1  - The effect of the particle shape and structure on the flowability of electrolytic copper powder. I. Modeling of a representative powder particle
EP  - 777
IS  - 10
SP  - 771
VL  - 68
DO  - 10.2298/JSC0310771P
ER  - 

@article{
author = "Popov, Konstantin I. and Krstić, Snežana B. and Obradović, MC and Pavlović, MG and Pavlović, Ljubica and Ivanović, Evica",
year = "2003",
abstract = "One of the most important properties of copper powder is its flowability which depends on the shape and the structure of the powder particles. A procedure for the determination of a representative powder particle permitting the free flow of copper powder is proposed.",
publisher = "Srpsko hemijsko društvo, Beograd",
journal = "JOURNAL OF THE SERBIAN CHEMICAL SOCIETY",
title = "The effect of the particle shape and structure on the flowability of electrolytic copper powder. I. Modeling of a representative powder particle",
pages = "777-771",
number = "10",
volume = "68",
doi = "10.2298/JSC0310771P"
}

Popov, K. I., Krstić, S. B., Obradović, M., Pavlović, M., Pavlović, L.,& Ivanović, E.. (2003). The effect of the particle shape and structure on the flowability of electrolytic copper powder. I. Modeling of a representative powder particle. in JOURNAL OF THE SERBIAN CHEMICAL SOCIETY
Srpsko hemijsko društvo, Beograd., 68(10), 771-777.
https://doi.org/10.2298/JSC0310771P

Popov KI, Krstić SB, Obradović M, Pavlović M, Pavlović L, Ivanović E. The effect of the particle shape and structure on the flowability of electrolytic copper powder. I. Modeling of a representative powder particle. in JOURNAL OF THE SERBIAN CHEMICAL SOCIETY. 2003;68(10):771-777.
doi:10.2298/JSC0310771P .

Popov, Konstantin I., Krstić, Snežana B., Obradović, MC, Pavlović, MG, Pavlović, Ljubica, Ivanović, Evica, "The effect of the particle shape and structure on the flowability of electrolytic copper powder. I. Modeling of a representative powder particle" in JOURNAL OF THE SERBIAN CHEMICAL SOCIETY, 68, no. 10 (2003):771-777,
https://doi.org/10.2298/JSC0310771P . .

TY  - JOUR
AU  - Popov, Konstantin I.
AU  - Pavlović, Ljubica
AU  - Ivanović, Evica
AU  - Radmilović, Velimir R.
AU  - Pavlović, Miomir G.
PY  - 2002
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/521
AB  - The possibility of depositing copper powders with different apparent density by changing the shape of reversing current wave is shown. The morphology and crystallinity of powder particles can be varied considerably by changing shape of the reversing current wave and, hence, the apparent density of powders. The relation of apparent density with particle morphology and structure was illustrated.
AB  - U radu je pokazana mogućnost dobijanja bakarnih prahova različitih nasipnih masa promenom oblika talasa reversne struje. Uspostavljena je zadovoljavajuća veza između morfologije i strukture čestica praha bakra i nasipne mase praha.
PB  - Srpsko hemijsko društvo, Beograd
T2  - JOURNAL OF THE SERBIAN CHEMICAL SOCIETY
T1  - The effect of reversing current deposition on the apparent density of electrolytic copper powder
T1  - Uticaj reversne struje na nasipnu masu pri elektrolitičkom taloženju bakarnog praha
EP  - 67
IS  - 1
SP  - 61
VL  - 67
DO  - 10.2298/JSC0201061P
ER  - 

@article{
author = "Popov, Konstantin I. and Pavlović, Ljubica and Ivanović, Evica and Radmilović, Velimir R. and Pavlović, Miomir G.",
year = "2002",
abstract = "The possibility of depositing copper powders with different apparent density by changing the shape of reversing current wave is shown. The morphology and crystallinity of powder particles can be varied considerably by changing shape of the reversing current wave and, hence, the apparent density of powders. The relation of apparent density with particle morphology and structure was illustrated., U radu je pokazana mogućnost dobijanja bakarnih prahova različitih nasipnih masa promenom oblika talasa reversne struje. Uspostavljena je zadovoljavajuća veza između morfologije i strukture čestica praha bakra i nasipne mase praha.",
publisher = "Srpsko hemijsko društvo, Beograd",
journal = "JOURNAL OF THE SERBIAN CHEMICAL SOCIETY",
title = "The effect of reversing current deposition on the apparent density of electrolytic copper powder, Uticaj reversne struje na nasipnu masu pri elektrolitičkom taloženju bakarnog praha",
pages = "67-61",
number = "1",
volume = "67",
doi = "10.2298/JSC0201061P"
}

Popov, K. I., Pavlović, L., Ivanović, E., Radmilović, V. R.,& Pavlović, M. G.. (2002). The effect of reversing current deposition on the apparent density of electrolytic copper powder. in JOURNAL OF THE SERBIAN CHEMICAL SOCIETY
Srpsko hemijsko društvo, Beograd., 67(1), 61-67.
https://doi.org/10.2298/JSC0201061P

Popov KI, Pavlović L, Ivanović E, Radmilović VR, Pavlović MG. The effect of reversing current deposition on the apparent density of electrolytic copper powder. in JOURNAL OF THE SERBIAN CHEMICAL SOCIETY. 2002;67(1):61-67.
doi:10.2298/JSC0201061P .

Popov, Konstantin I., Pavlović, Ljubica, Ivanović, Evica, Radmilović, Velimir R., Pavlović, Miomir G., "The effect of reversing current deposition on the apparent density of electrolytic copper powder" in JOURNAL OF THE SERBIAN CHEMICAL SOCIETY, 67, no. 1 (2002):61-67,
https://doi.org/10.2298/JSC0201061P . .

TY  - JOUR
AU  - Pavlović, M.G.
AU  - Pavlović, Ljubica
AU  - Ivanović, Evica
AU  - Radmilović, V.
AU  - Popov, Konstantin I.
PY  - 2001
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/280
AB  - The quantitative microstructural analysis and the sieve analysis of copper powder as well as the scanning electron microscopy analysis of the copper powders particles were performed. It was found that the structure of the copper powder particles determines the apparent density of copper powder. The powder particles from the same fractions of different powders occupy approximately the same volume, but the structure of metallic copper is very different. This causes the difference in apparent densities of copper powder obtained under different conditions. The more dendritic is the structure of powder particles the smaller is the apparent density of copper powder.
AB  - Izvršena je kvalitativna mikrostrukturna i granulometrijska analiza bakarnih prahova kao i analiza morfologije i strukture čestica praha pomoću skenirajuće elektronske mikroskopije (SEM). Ustanovljeno je da struktura čestica praha određuje nasipnu masu bakarnog praha. Čestice iste frakcije različitih prahova zauzimaju otprilike istu zapreminu, ali je struktura metalnog bakra različita. Ovo uzrokuje razlike u nasipnoj masi bakarnog praha dobijenog pod različitim uslovima. Što je struktura čestica više dendritična to je manja nasipna masa bakarnog praha.
PB  - Srpsko hemijsko društvo, Beograd
T2  - Journal of the Serbian Chemical Society
T1  - The effect of particle structure on apparent density of electrolytic copper powder
T1  - Uticaj strukture čestica na nasipnu masu elektrolitički dobijenog bakarnog praha
EP  - 933
IS  - 11-12
SP  - 923
VL  - 66
DO  - 10.2298/jsc0112923p
ER  - 

@article{
author = "Pavlović, M.G. and Pavlović, Ljubica and Ivanović, Evica and Radmilović, V. and Popov, Konstantin I.",
year = "2001",
abstract = "The quantitative microstructural analysis and the sieve analysis of copper powder as well as the scanning electron microscopy analysis of the copper powders particles were performed. It was found that the structure of the copper powder particles determines the apparent density of copper powder. The powder particles from the same fractions of different powders occupy approximately the same volume, but the structure of metallic copper is very different. This causes the difference in apparent densities of copper powder obtained under different conditions. The more dendritic is the structure of powder particles the smaller is the apparent density of copper powder., Izvršena je kvalitativna mikrostrukturna i granulometrijska analiza bakarnih prahova kao i analiza morfologije i strukture čestica praha pomoću skenirajuće elektronske mikroskopije (SEM). Ustanovljeno je da struktura čestica praha određuje nasipnu masu bakarnog praha. Čestice iste frakcije različitih prahova zauzimaju otprilike istu zapreminu, ali je struktura metalnog bakra različita. Ovo uzrokuje razlike u nasipnoj masi bakarnog praha dobijenog pod različitim uslovima. Što je struktura čestica više dendritična to je manja nasipna masa bakarnog praha.",
publisher = "Srpsko hemijsko društvo, Beograd",
journal = "Journal of the Serbian Chemical Society",
title = "The effect of particle structure on apparent density of electrolytic copper powder, Uticaj strukture čestica na nasipnu masu elektrolitički dobijenog bakarnog praha",
pages = "933-923",
number = "11-12",
volume = "66",
doi = "10.2298/jsc0112923p"
}

Pavlović, M.G., Pavlović, L., Ivanović, E., Radmilović, V.,& Popov, K. I.. (2001). The effect of particle structure on apparent density of electrolytic copper powder. in Journal of the Serbian Chemical Society
Srpsko hemijsko društvo, Beograd., 66(11-12), 923-933.
https://doi.org/10.2298/jsc0112923p

Pavlović M, Pavlović L, Ivanović E, Radmilović V, Popov KI. The effect of particle structure on apparent density of electrolytic copper powder. in Journal of the Serbian Chemical Society. 2001;66(11-12):923-933.
doi:10.2298/jsc0112923p .

Pavlović, M.G., Pavlović, Ljubica, Ivanović, Evica, Radmilović, V., Popov, Konstantin I., "The effect of particle structure on apparent density of electrolytic copper powder" in Journal of the Serbian Chemical Society, 66, no. 11-12 (2001):923-933,
https://doi.org/10.2298/jsc0112923p . .