TY  - CONF
AU  - Stojanović, BD
AU  - Foschini, CR
AU  - Pejović, VZ
AU  - Pavlović, Vladimir
AU  - Varela, JA
PY  - 2004
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/818
AB  - The deposition of thick film pastes by screen-printing is a relatively simple and convenient method to produce thicker layers with thickness up to 100 mum. In the present work, the barium titanate thick films were prepared from mechanically activated powders based on BaC03 and TiO2. After mixing, the powders were calcined at low temperature by slow heating and cooling rates. The thick films were deposited on to Al2O3 substrates through hybrid technology. The obtained films were fired at 850 degreesC together with electrode material (silver/palladium). The electrical properties of thick films: dielectric permittivity, dielectric losses, Curie temperature, hysteresis loop were reported. The obtained BT thick films can be applied in as multilayer capacitors or in gas sensor application.
PB  - Elsevier Sci Ltd, Oxford
C3  - Journal of the European Ceramic Society
T1  - Electrical properties of screen printed BaTiO3 thick films
EP  - 1471
IS  - 6
SP  - 1467
VL  - 24
DO  - 10.1016/S0955-2219(03)00528-4
ER  - 

@conference{
author = "Stojanović, BD and Foschini, CR and Pejović, VZ and Pavlović, Vladimir and Varela, JA",
year = "2004",
abstract = "The deposition of thick film pastes by screen-printing is a relatively simple and convenient method to produce thicker layers with thickness up to 100 mum. In the present work, the barium titanate thick films were prepared from mechanically activated powders based on BaC03 and TiO2. After mixing, the powders were calcined at low temperature by slow heating and cooling rates. The thick films were deposited on to Al2O3 substrates through hybrid technology. The obtained films were fired at 850 degreesC together with electrode material (silver/palladium). The electrical properties of thick films: dielectric permittivity, dielectric losses, Curie temperature, hysteresis loop were reported. The obtained BT thick films can be applied in as multilayer capacitors or in gas sensor application.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Journal of the European Ceramic Society",
title = "Electrical properties of screen printed BaTiO3 thick films",
pages = "1471-1467",
number = "6",
volume = "24",
doi = "10.1016/S0955-2219(03)00528-4"
}

Stojanović, B., Foschini, C., Pejović, V., Pavlović, V.,& Varela, J.. (2004). Electrical properties of screen printed BaTiO3 thick films. in Journal of the European Ceramic Society
Elsevier Sci Ltd, Oxford., 24(6), 1467-1471.
https://doi.org/10.1016/S0955-2219(03)00528-4

Stojanović B, Foschini C, Pejović V, Pavlović V, Varela J. Electrical properties of screen printed BaTiO3 thick films. in Journal of the European Ceramic Society. 2004;24(6):1467-1471.
doi:10.1016/S0955-2219(03)00528-4 .

Stojanović, BD, Foschini, CR, Pejović, VZ, Pavlović, Vladimir, Varela, JA, "Electrical properties of screen printed BaTiO3 thick films" in Journal of the European Ceramic Society, 24, no. 6 (2004):1467-1471,
https://doi.org/10.1016/S0955-2219(03)00528-4 . .

TY  - JOUR
AU  - Stojanović, B. D.
AU  - Foschini, C. R.
AU  - Pavlović, V. B.
AU  - Pavlović, V. M.
AU  - Pejović, V.
AU  - Varela, J. A.
PY  - 2002
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/502
AB  - Barium titanate (BT) thick films were prepared from mechanically activated powders based on BaCO3 and TiO2. After homogenization and milling in a high-energy vibro mill, the powders were calcined at 700 degreesC for 2 h by slow heating and cooling rates. A thick film paste was prepared by mixing BT fine powders with small amount of low temperature sintering aid and organic binder. The thick films were screen-printed on alumina substrates electroded with Ag-Pd. The BT films were sintered at 850 degreesC for 1 h. The thickness was 25-75 mum depending of number of layers. The microstructure of thick films and the compatibility between BT layers and substrate were investigated by SEM Results of dielectric property measurements are also reported.
PB  - Elsevier Sci Ltd, Oxford
T2  - Ceramics International
T1  - Barium titanate screen-printed thick films
EP  - 298
IS  - 3
SP  - 293
VL  - 28
DO  - 10.1016/S0272-8842(01)00093-1
ER  - 

@article{
author = "Stojanović, B. D. and Foschini, C. R. and Pavlović, V. B. and Pavlović, V. M. and Pejović, V. and Varela, J. A.",
year = "2002",
abstract = "Barium titanate (BT) thick films were prepared from mechanically activated powders based on BaCO3 and TiO2. After homogenization and milling in a high-energy vibro mill, the powders were calcined at 700 degreesC for 2 h by slow heating and cooling rates. A thick film paste was prepared by mixing BT fine powders with small amount of low temperature sintering aid and organic binder. The thick films were screen-printed on alumina substrates electroded with Ag-Pd. The BT films were sintered at 850 degreesC for 1 h. The thickness was 25-75 mum depending of number of layers. The microstructure of thick films and the compatibility between BT layers and substrate were investigated by SEM Results of dielectric property measurements are also reported.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Ceramics International",
title = "Barium titanate screen-printed thick films",
pages = "298-293",
number = "3",
volume = "28",
doi = "10.1016/S0272-8842(01)00093-1"
}

Stojanović, B. D., Foschini, C. R., Pavlović, V. B., Pavlović, V. M., Pejović, V.,& Varela, J. A.. (2002). Barium titanate screen-printed thick films. in Ceramics International
Elsevier Sci Ltd, Oxford., 28(3), 293-298.
https://doi.org/10.1016/S0272-8842(01)00093-1

Stojanović BD, Foschini CR, Pavlović VB, Pavlović VM, Pejović V, Varela JA. Barium titanate screen-printed thick films. in Ceramics International. 2002;28(3):293-298.
doi:10.1016/S0272-8842(01)00093-1 .

Stojanović, B. D., Foschini, C. R., Pavlović, V. B., Pavlović, V. M., Pejović, V., Varela, J. A., "Barium titanate screen-printed thick films" in Ceramics International, 28, no. 3 (2002):293-298,
https://doi.org/10.1016/S0272-8842(01)00093-1 . .

TY  - CONF
AU  - Stojanović, BD
AU  - Foschini, CR
AU  - Pejović, VZ
AU  - Pavlović, Vladimir
AU  - Pavlović, V. P.
AU  - Varela, JA
PY  - 2002
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/507
AB  - Barium titanate thick films were prepared from mechanically activated powders based on BaCO3 and TiO2. The thick films were screen-printed on alumina substrates electroded with Ag/Pd. The BT films were sintered at 850 degreesC for 1 hour. The thickness was 30-75 mum depending of number of layers. The microstructure of thick films and the compatibility between BT layers and substrate was investigated by SEM. The dielectric properties were measured and the results were reported.
PB  - Trans Tech Publications Ltd, Durnten-Zurich
C3  - Euro Ceramics VII, Pt 1-3
T1  - Screen printed barium titanate thick films prepared from mechanically activated powders
EP  - 1428
SP  - 1425
VL  - 206-2
DO  - 10.4028/www.scientific.net/KEM.206-213.1425
ER  - 

@conference{
author = "Stojanović, BD and Foschini, CR and Pejović, VZ and Pavlović, Vladimir and Pavlović, V. P. and Varela, JA",
year = "2002",
abstract = "Barium titanate thick films were prepared from mechanically activated powders based on BaCO3 and TiO2. The thick films were screen-printed on alumina substrates electroded with Ag/Pd. The BT films were sintered at 850 degreesC for 1 hour. The thickness was 30-75 mum depending of number of layers. The microstructure of thick films and the compatibility between BT layers and substrate was investigated by SEM. The dielectric properties were measured and the results were reported.",
publisher = "Trans Tech Publications Ltd, Durnten-Zurich",
journal = "Euro Ceramics VII, Pt 1-3",
title = "Screen printed barium titanate thick films prepared from mechanically activated powders",
pages = "1428-1425",
volume = "206-2",
doi = "10.4028/www.scientific.net/KEM.206-213.1425"
}

Stojanović, B., Foschini, C., Pejović, V., Pavlović, V., Pavlović, V. P.,& Varela, J.. (2002). Screen printed barium titanate thick films prepared from mechanically activated powders. in Euro Ceramics VII, Pt 1-3
Trans Tech Publications Ltd, Durnten-Zurich., 206-2, 1425-1428.
https://doi.org/10.4028/www.scientific.net/KEM.206-213.1425

Stojanović B, Foschini C, Pejović V, Pavlović V, Pavlović VP, Varela J. Screen printed barium titanate thick films prepared from mechanically activated powders. in Euro Ceramics VII, Pt 1-3. 2002;206-2:1425-1428.
doi:10.4028/www.scientific.net/KEM.206-213.1425 .

Stojanović, BD, Foschini, CR, Pejović, VZ, Pavlović, Vladimir, Pavlović, V. P., Varela, JA, "Screen printed barium titanate thick films prepared from mechanically activated powders" in Euro Ceramics VII, Pt 1-3, 206-2 (2002):1425-1428,
https://doi.org/10.4028/www.scientific.net/KEM.206-213.1425 . .

TY  - CONF
AU  - Stojanović, BD
AU  - Foschini, CR
AU  - Srecković, TV
AU  - Pavlović, Vladimir
AU  - Zivković, LJ
AU  - Cilence, M
AU  - Varela, JA
PY  - 2001
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/279
AB  - BaTiO3 is usually doped to achieve the temperature stability required by device applications, as well as to obtain a large positive temperature coefficient anomaly of resistivity (PTCR). Uniform distribution of dopants among the submicron dielectric particles is the key for optimal control of grain size and microstructure to maintain a high reliability. The system Ba0.84Pb0.16TiO3 was synthesized from high purity BaCO3, TiO2, PbO oxide powders as raw materials. Sb2O3, MnSO4 and ZnO were used as dopants and Al2O3, TiO2 and SiO2 as grain growth controllers. Phase composition was analyzed by using XRD and the microstructure was investigated by SEM. EDS attached to SEM was used to analyze phase composition specially related to abnormal grain growth. Electrical resistivities were measured as a function of temperature and the PTCR effect characterized by an abrupt increase on resistivity.
PB  - 12th International Symposium on Integrated Ferroelectrics
C3  - Integrated Ferroelectrics
T1  - Structural and electrical characterization of semiconducting barium-lead-titanate ceramics
EP  - 82
IS  - 1-4
SP  - 73
VL  - 32
DO  - 10.1080/10584580108215679
ER  - 

@conference{
author = "Stojanović, BD and Foschini, CR and Srecković, TV and Pavlović, Vladimir and Zivković, LJ and Cilence, M and Varela, JA",
year = "2001",
abstract = "BaTiO3 is usually doped to achieve the temperature stability required by device applications, as well as to obtain a large positive temperature coefficient anomaly of resistivity (PTCR). Uniform distribution of dopants among the submicron dielectric particles is the key for optimal control of grain size and microstructure to maintain a high reliability. The system Ba0.84Pb0.16TiO3 was synthesized from high purity BaCO3, TiO2, PbO oxide powders as raw materials. Sb2O3, MnSO4 and ZnO were used as dopants and Al2O3, TiO2 and SiO2 as grain growth controllers. Phase composition was analyzed by using XRD and the microstructure was investigated by SEM. EDS attached to SEM was used to analyze phase composition specially related to abnormal grain growth. Electrical resistivities were measured as a function of temperature and the PTCR effect characterized by an abrupt increase on resistivity.",
publisher = "12th International Symposium on Integrated Ferroelectrics",
journal = "Integrated Ferroelectrics",
title = "Structural and electrical characterization of semiconducting barium-lead-titanate ceramics",
pages = "82-73",
number = "1-4",
volume = "32",
doi = "10.1080/10584580108215679"
}

Stojanović, B., Foschini, C., Srecković, T., Pavlović, V., Zivković, L., Cilence, M.,& Varela, J.. (2001). Structural and electrical characterization of semiconducting barium-lead-titanate ceramics. in Integrated Ferroelectrics
12th International Symposium on Integrated Ferroelectrics., 32(1-4), 73-82.
https://doi.org/10.1080/10584580108215679

Stojanović B, Foschini C, Srecković T, Pavlović V, Zivković L, Cilence M, Varela J. Structural and electrical characterization of semiconducting barium-lead-titanate ceramics. in Integrated Ferroelectrics. 2001;32(1-4):73-82.
doi:10.1080/10584580108215679 .

Stojanović, BD, Foschini, CR, Srecković, TV, Pavlović, Vladimir, Zivković, LJ, Cilence, M, Varela, JA, "Structural and electrical characterization of semiconducting barium-lead-titanate ceramics" in Integrated Ferroelectrics, 32, no. 1-4 (2001):73-82,
https://doi.org/10.1080/10584580108215679 . .