TY  - JOUR
AU  - Barać, Saša
AU  - Petrović, Dragan
AU  - Vuković, Aleksandar
AU  - Biberdžić, Milan
AU  - Djikić, A.
AU  - Djokić, Dragoslav
PY  - 2017
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/4566
AB  - Proper protection and quality work of sprayer enable the optimization of the pesticide application and reduces the harmful effects on the environment and human health. The efficiency of the implemented protection is reflected in several aspects, and one of the most important is the quality of the work of sprayers, that is, the equality of pesticides distribution with nozzles. The paper presents an analysis and comparison of test results in the framework of the inspection of field crop sprayers in the exploitation conditions of central Serbia, in accordance with European standards EN 13790, which prescribes methods and equipment for inspection. The aim of the research was to determine the quality of the work of chests and the uniformity of the flow of various sprays, depending on the defined parameters. The test equipment used 'AAMSSALVARANI' measuring equipment, and the flow of the nozzles was measured by the SN S001 individual nozzles. On the basis of the obtained results, it was concluded that the average values of the flow of the sprayer amounted to 0.954 l min-1 (typ A), 1.169 l min-1 (typ B), or until 1.190 l min-1 (sprayer typ C), where the coefficient of variation was in the range 12.24% to 29.49%.
AB  - Pravilnom zaštitom i kvalitetnim radom prskalica omogućuje se optimizacija aplikacije pesticida i smanjuje štetni uticaj na životnu sredinu i zdravlje ljudi. Efikasnost izvedene zaštite ogleda se sa više aspekata a jedan od najznačajnijih je kvalitet rada prskalica, odnosno uniformnost distribucije pesticida rasprskivačima. Rad predstavlja analizu i upoređenje rezultata ispitivanja u sklopu inspekcijske kontrole ratarskih prskalica u eksploatacionim uslovima centralne Srbije, u skladu sa evropskim normama EN 13790 koji propisuje metode i opremu za obavljanje inspekcije. Cilj istraživanja je bio da se utvrdi kvalitet rada prsaklica i uniformnost protoka različitih rasprskivača u zavisnosti od definisanih parametara. Za ispitivanje je korišćena merna oprema 'AAMSSALVARANI', a protok rasprskivača je meren pomoću ispitivača pojedinačnih rasprskivača SN S001. Na osnovu dobijenih rezultata zaključeno je da su prosečne vrednosti protoka rasprskivača iznosile 0,954 l min-1 (tip A), 1,169 l min-1 (tip B), odnosno 1,190 l min-1 (tip C), pri čemu je koeficijent varijacije bio u rasponu 12,24% do 29,49%.
PB  - Nacionalno naučno društvo za poljoprivrednu tehniku, Novi Sad
T2  - Savremena poljoprivredna tehnika
T1  - Results of the examination of field crop sprayers in the conditions of central Serbia
T1  - Rezultati ispitivanja ratarskih prskalica u uslovima centralne Srbije
EP  - 26
IS  - 1
SP  - 17
VL  - 43
DO  - 10.5937/SavPoljTeh1701017B
ER  - 

@article{
author = "Barać, Saša and Petrović, Dragan and Vuković, Aleksandar and Biberdžić, Milan and Djikić, A. and Djokić, Dragoslav",
year = "2017",
abstract = "Proper protection and quality work of sprayer enable the optimization of the pesticide application and reduces the harmful effects on the environment and human health. The efficiency of the implemented protection is reflected in several aspects, and one of the most important is the quality of the work of sprayers, that is, the equality of pesticides distribution with nozzles. The paper presents an analysis and comparison of test results in the framework of the inspection of field crop sprayers in the exploitation conditions of central Serbia, in accordance with European standards EN 13790, which prescribes methods and equipment for inspection. The aim of the research was to determine the quality of the work of chests and the uniformity of the flow of various sprays, depending on the defined parameters. The test equipment used 'AAMSSALVARANI' measuring equipment, and the flow of the nozzles was measured by the SN S001 individual nozzles. On the basis of the obtained results, it was concluded that the average values of the flow of the sprayer amounted to 0.954 l min-1 (typ A), 1.169 l min-1 (typ B), or until 1.190 l min-1 (sprayer typ C), where the coefficient of variation was in the range 12.24% to 29.49%., Pravilnom zaštitom i kvalitetnim radom prskalica omogućuje se optimizacija aplikacije pesticida i smanjuje štetni uticaj na životnu sredinu i zdravlje ljudi. Efikasnost izvedene zaštite ogleda se sa više aspekata a jedan od najznačajnijih je kvalitet rada prskalica, odnosno uniformnost distribucije pesticida rasprskivačima. Rad predstavlja analizu i upoređenje rezultata ispitivanja u sklopu inspekcijske kontrole ratarskih prskalica u eksploatacionim uslovima centralne Srbije, u skladu sa evropskim normama EN 13790 koji propisuje metode i opremu za obavljanje inspekcije. Cilj istraživanja je bio da se utvrdi kvalitet rada prsaklica i uniformnost protoka različitih rasprskivača u zavisnosti od definisanih parametara. Za ispitivanje je korišćena merna oprema 'AAMSSALVARANI', a protok rasprskivača je meren pomoću ispitivača pojedinačnih rasprskivača SN S001. Na osnovu dobijenih rezultata zaključeno je da su prosečne vrednosti protoka rasprskivača iznosile 0,954 l min-1 (tip A), 1,169 l min-1 (tip B), odnosno 1,190 l min-1 (tip C), pri čemu je koeficijent varijacije bio u rasponu 12,24% do 29,49%.",
publisher = "Nacionalno naučno društvo za poljoprivrednu tehniku, Novi Sad",
journal = "Savremena poljoprivredna tehnika",
title = "Results of the examination of field crop sprayers in the conditions of central Serbia, Rezultati ispitivanja ratarskih prskalica u uslovima centralne Srbije",
pages = "26-17",
number = "1",
volume = "43",
doi = "10.5937/SavPoljTeh1701017B"
}

Barać, S., Petrović, D., Vuković, A., Biberdžić, M., Djikić, A.,& Djokić, D.. (2017). Results of the examination of field crop sprayers in the conditions of central Serbia. in Savremena poljoprivredna tehnika
Nacionalno naučno društvo za poljoprivrednu tehniku, Novi Sad., 43(1), 17-26.
https://doi.org/10.5937/SavPoljTeh1701017B

Barać S, Petrović D, Vuković A, Biberdžić M, Djikić A, Djokić D. Results of the examination of field crop sprayers in the conditions of central Serbia. in Savremena poljoprivredna tehnika. 2017;43(1):17-26.
doi:10.5937/SavPoljTeh1701017B .

Barać, Saša, Petrović, Dragan, Vuković, Aleksandar, Biberdžić, Milan, Djikić, A., Djokić, Dragoslav, "Results of the examination of field crop sprayers in the conditions of central Serbia" in Savremena poljoprivredna tehnika, 43, no. 1 (2017):17-26,
https://doi.org/10.5937/SavPoljTeh1701017B . .

TY  - CONF
AU  - Barać, Saša
AU  - Petrović, Dragan
AU  - Radojević, Rade
AU  - Biberdžić, Milan
AU  - Dikić, Aleksandar B.
PY  - 2015
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/3723
AB  - Forage harvesters should chop crop mass to particles having short and uniform lengths. Length distribution of forage particles represents an important parameter for ruminant's diet formulation, especially for dairy cattle. During silage production, harvest considerations should be focused to obtaining the adequate particle size distribution of the ensiling crop particles. This paper presents the results of mining studies of three different forage harvesters at harvesting maize for silage preparation. The aim of this testing is to determine the operational characteristics and quality of the following forage harvesters Claas Jaguar 675, Zmaj 350 and John Deere 5820. The average yield of the mass was about 26 t ha(-1). Based on these results, it is concluded that the losses due to cutting height range from 3.83% to 5.97%. Clear relation between working velocity of forage harvesters and losses caused by inappropriate cutting height was proved. These two parameters are directly proportional, i. e. their connection is strong (R-2 = 0.88) and linear. All three harvesters achieved fairly acceptable cut lengths of harvested maize particles. However, experimental results verify the operational supremacy of forage harvesters Class Jaguar 675 and John Deere 5820 with relation to the long used forage harvester Zmaj 350. The minimum deviation achieved for long chopped mass in relation to the setting, was recorded when storing silage with silage Claas Jaguar 675 in which the average length of chopped mass was 9.97 mm, where as for the fraction of length up to 10 mm was 69.87%.
PB  - Agronomski fakultet Sveucilista u Zagrebu, 10000 Zagreb
C3  - Aktualni Zadaci Mehanizacije Poljoprivrede: Actual Tasks on Agricultural Engineering
T1  - Comparison of self propelled forage harvesters in maize harvesting
EP  - 385
SP  - 377
VL  - 43
UR  - https://hdl.handle.net/21.15107/rcub_agrospace_3723
ER  - 

@conference{
author = "Barać, Saša and Petrović, Dragan and Radojević, Rade and Biberdžić, Milan and Dikić, Aleksandar B.",
year = "2015",
abstract = "Forage harvesters should chop crop mass to particles having short and uniform lengths. Length distribution of forage particles represents an important parameter for ruminant's diet formulation, especially for dairy cattle. During silage production, harvest considerations should be focused to obtaining the adequate particle size distribution of the ensiling crop particles. This paper presents the results of mining studies of three different forage harvesters at harvesting maize for silage preparation. The aim of this testing is to determine the operational characteristics and quality of the following forage harvesters Claas Jaguar 675, Zmaj 350 and John Deere 5820. The average yield of the mass was about 26 t ha(-1). Based on these results, it is concluded that the losses due to cutting height range from 3.83% to 5.97%. Clear relation between working velocity of forage harvesters and losses caused by inappropriate cutting height was proved. These two parameters are directly proportional, i. e. their connection is strong (R-2 = 0.88) and linear. All three harvesters achieved fairly acceptable cut lengths of harvested maize particles. However, experimental results verify the operational supremacy of forage harvesters Class Jaguar 675 and John Deere 5820 with relation to the long used forage harvester Zmaj 350. The minimum deviation achieved for long chopped mass in relation to the setting, was recorded when storing silage with silage Claas Jaguar 675 in which the average length of chopped mass was 9.97 mm, where as for the fraction of length up to 10 mm was 69.87%.",
publisher = "Agronomski fakultet Sveucilista u Zagrebu, 10000 Zagreb",
journal = "Aktualni Zadaci Mehanizacije Poljoprivrede: Actual Tasks on Agricultural Engineering",
title = "Comparison of self propelled forage harvesters in maize harvesting",
pages = "385-377",
volume = "43",
url = "https://hdl.handle.net/21.15107/rcub_agrospace_3723"
}

Barać, S., Petrović, D., Radojević, R., Biberdžić, M.,& Dikić, A. B.. (2015). Comparison of self propelled forage harvesters in maize harvesting. in Aktualni Zadaci Mehanizacije Poljoprivrede: Actual Tasks on Agricultural Engineering
Agronomski fakultet Sveucilista u Zagrebu, 10000 Zagreb., 43, 377-385.
https://hdl.handle.net/21.15107/rcub_agrospace_3723

Barać S, Petrović D, Radojević R, Biberdžić M, Dikić AB. Comparison of self propelled forage harvesters in maize harvesting. in Aktualni Zadaci Mehanizacije Poljoprivrede: Actual Tasks on Agricultural Engineering. 2015;43:377-385.
https://hdl.handle.net/21.15107/rcub_agrospace_3723 .

Barać, Saša, Petrović, Dragan, Radojević, Rade, Biberdžić, Milan, Dikić, Aleksandar B., "Comparison of self propelled forage harvesters in maize harvesting" in Aktualni Zadaci Mehanizacije Poljoprivrede: Actual Tasks on Agricultural Engineering, 43 (2015):377-385,
https://hdl.handle.net/21.15107/rcub_agrospace_3723 .

TY  - JOUR
AU  - Barać, Saša
AU  - Petrović, Dragan
AU  - Djikić, A.
AU  - Biberdžić, Milan
AU  - Koprivica, Ranko
PY  - 2015
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/3875
AB  - The paper presents an analysis and comparison of the results of exploitation testing the different machines for soil tillage under conventional and reduced tillage, as well as evaluating the quality of the two types of sowing in the production of buckwheat and winter rye, in the conditions of northern Kosovo and Metohia. The previous crop was mercantile maize. The aim of this study was to determine the effects of the aggregate labor indicators for tillage and seeding, in the production of winter rye and buckwheat, and the results will enable proper selection of appropriate technological and technical systems and pointing out the advantages and disadvantages of the applied systems for tillage and seeding. In a variant of conventional tillage in relation to reduced tillage fuel consumption was higher by 27.41 up to 27.73%, while the yields of buckwheat was lower by 22.02%, and winter rye up to 20.18%. Measured values of longitudinal and lateral distances, and depths of buckwheat and rye seeds, are numerically processed using inverse distance interpolation method. Consequently, an appropriate contour maps that present distributions of relative frequencies with respect to longitudinal and lateral seeding distances, as well as seeding depths, are drawn. These maps clearly illustrate accuracy quality of work and operational stability of two analyzed seeding machines having quire different designs of seeding apparatus, in the working conditions of buckwheat and rye seeding.
AB  - Rad predstavlja analizu i upoređenje rezultata eksploatacionih ispitivanja različitih mašina za obradu zemljišta u okviru konvencionale i redukovane obrade, kao i ocenu kvaliteta rada dva tipa sejalica u proizvodnji heljde i ozime raži u uslovima severnog Kosova i Metohije. Predkultura je bila merkantilni kukuruz. Cilj istraživanja je bio da se utvrde pokazatelji efekata rada agregata za obradu zemljišta i setvu u proizvodnji heljde i ozime raži, a dobijeni rezultati omogućiće pravilan izbor odgovarajućeg tehnološko-tehničkog sistema i ukazati na prednosti i nedostatke primenjenih sistema za obradu zemljišta i setvu. U varijanti konvencionalne obrade u odnosu na redukovanu obradu potrošnja goriva je bila veća za 27,41-27,73%, pri čemu su ostvareni prinosi heljde bili manji za 22,02%, a ozime raži za 20,18%. Kvalitet rada sejalica obuhvatio je određivanje uzdužnog, poprečnog i rasporeda zrna po dubini setvenog sloja. Izmerene vrednosti uzdužnih i poprečnih rastojanja kao i dubine setve heljde i raži, su numerički obrađene metodom interpolacije inverzne udaljenosti. Na osnovu toga, urađene su odgovarajuće konturne mape koje predstavljaju distribucije relativne učestalosti u odnosu na uzdužna i bočna rastojanja semena pri setvi, kao i dubinu setve. Ove mape jasno pokazuju kvalitet rada i radnu stabilnost dveju analiziranih sejalica sa različitom konstrukcijom setvenog aparata, u uslovima rada pri setvi heljde i raži.
PB  - Nacionalno naučno društvo za poljoprivrednu tehniku, Novi Sad
T2  - Savremena poljoprivredna tehnika
T1  - Results of testing the machineries for soil tillage and seeding the buckwheat and rye
T1  - Rezultati ispitivanja mašina za obradu zemljišta i setvu heljde i raži
EP  - 34
IS  - 1
SP  - 25
VL  - 41
DO  - 10.5937/SavPoljTeh1501025B
ER  - 

@article{
author = "Barać, Saša and Petrović, Dragan and Djikić, A. and Biberdžić, Milan and Koprivica, Ranko",
year = "2015",
abstract = "The paper presents an analysis and comparison of the results of exploitation testing the different machines for soil tillage under conventional and reduced tillage, as well as evaluating the quality of the two types of sowing in the production of buckwheat and winter rye, in the conditions of northern Kosovo and Metohia. The previous crop was mercantile maize. The aim of this study was to determine the effects of the aggregate labor indicators for tillage and seeding, in the production of winter rye and buckwheat, and the results will enable proper selection of appropriate technological and technical systems and pointing out the advantages and disadvantages of the applied systems for tillage and seeding. In a variant of conventional tillage in relation to reduced tillage fuel consumption was higher by 27.41 up to 27.73%, while the yields of buckwheat was lower by 22.02%, and winter rye up to 20.18%. Measured values of longitudinal and lateral distances, and depths of buckwheat and rye seeds, are numerically processed using inverse distance interpolation method. Consequently, an appropriate contour maps that present distributions of relative frequencies with respect to longitudinal and lateral seeding distances, as well as seeding depths, are drawn. These maps clearly illustrate accuracy quality of work and operational stability of two analyzed seeding machines having quire different designs of seeding apparatus, in the working conditions of buckwheat and rye seeding., Rad predstavlja analizu i upoređenje rezultata eksploatacionih ispitivanja različitih mašina za obradu zemljišta u okviru konvencionale i redukovane obrade, kao i ocenu kvaliteta rada dva tipa sejalica u proizvodnji heljde i ozime raži u uslovima severnog Kosova i Metohije. Predkultura je bila merkantilni kukuruz. Cilj istraživanja je bio da se utvrde pokazatelji efekata rada agregata za obradu zemljišta i setvu u proizvodnji heljde i ozime raži, a dobijeni rezultati omogućiće pravilan izbor odgovarajućeg tehnološko-tehničkog sistema i ukazati na prednosti i nedostatke primenjenih sistema za obradu zemljišta i setvu. U varijanti konvencionalne obrade u odnosu na redukovanu obradu potrošnja goriva je bila veća za 27,41-27,73%, pri čemu su ostvareni prinosi heljde bili manji za 22,02%, a ozime raži za 20,18%. Kvalitet rada sejalica obuhvatio je određivanje uzdužnog, poprečnog i rasporeda zrna po dubini setvenog sloja. Izmerene vrednosti uzdužnih i poprečnih rastojanja kao i dubine setve heljde i raži, su numerički obrađene metodom interpolacije inverzne udaljenosti. Na osnovu toga, urađene su odgovarajuće konturne mape koje predstavljaju distribucije relativne učestalosti u odnosu na uzdužna i bočna rastojanja semena pri setvi, kao i dubinu setve. Ove mape jasno pokazuju kvalitet rada i radnu stabilnost dveju analiziranih sejalica sa različitom konstrukcijom setvenog aparata, u uslovima rada pri setvi heljde i raži.",
publisher = "Nacionalno naučno društvo za poljoprivrednu tehniku, Novi Sad",
journal = "Savremena poljoprivredna tehnika",
title = "Results of testing the machineries for soil tillage and seeding the buckwheat and rye, Rezultati ispitivanja mašina za obradu zemljišta i setvu heljde i raži",
pages = "34-25",
number = "1",
volume = "41",
doi = "10.5937/SavPoljTeh1501025B"
}

Barać, S., Petrović, D., Djikić, A., Biberdžić, M.,& Koprivica, R.. (2015). Results of testing the machineries for soil tillage and seeding the buckwheat and rye. in Savremena poljoprivredna tehnika
Nacionalno naučno društvo za poljoprivrednu tehniku, Novi Sad., 41(1), 25-34.
https://doi.org/10.5937/SavPoljTeh1501025B

Barać S, Petrović D, Djikić A, Biberdžić M, Koprivica R. Results of testing the machineries for soil tillage and seeding the buckwheat and rye. in Savremena poljoprivredna tehnika. 2015;41(1):25-34.
doi:10.5937/SavPoljTeh1501025B .

Barać, Saša, Petrović, Dragan, Djikić, A., Biberdžić, Milan, Koprivica, Ranko, "Results of testing the machineries for soil tillage and seeding the buckwheat and rye" in Savremena poljoprivredna tehnika, 41, no. 1 (2015):25-34,
https://doi.org/10.5937/SavPoljTeh1501025B . .

TY  - CONF
AU  - Jovović, Zoran
AU  - Dolijanović, Željko
AU  - Milošević, Drago
AU  - Velimirović, Ana
AU  - Biberdžić, Milan
PY  - 2013
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/6526
AB  - In this paper results of studies of the effects of different combinations of mineral fertilizers and rotted farmyard manure on yield and other parameters of the productivity of potato are presented. The experiments were conducted in 2008 and 2009 in mountainous regions of Montenegro (Kolašin), on the alluvial-diluvial soil, at an altitude of about 900 m.
The results obtained suggested that the application of manure had significant impact on increasing the productivity of the studied parameters of potato. The influence of mineral nutrition was also very distinct. The highest values of the studied parameters of potato productivity were obtained by applying fertilizers with humic acids (NPK 15:15:15 400 kg.ha-1 + MCB 300 kg.ha-1 and MCB 800 kg.ha-1 + KMg 100 kg.ha-1), which were, compared to the other treatments, statistically justified. The highest number, average weight and tuber yield in two years studied was obtained in the variant treated individually with MCB 800 kg.ha-1 + KMg 100 kg.ha-1 or the same variant combined with the manure. In all variants application of combination of organic and mineral fertilizers resulted in higher number and average weight of tubers, as well as the higher yield per hectare compared to the non-fertilized variant.
PB  - Potato Research Institute Havličkuv Brod Ltd
C3  - 2nd International symposium on agronomy and physiology of potato (Potato Agrophysiology 2013), September 15-19, 2013, Prague, Czech Republic
T1  - Influence of different nutrition systems on yield and other parameters of productivity of potato
SP  - 216-223
UR  - https://hdl.handle.net/21.15107/rcub_agrospace_6526
ER  - 

@conference{
author = "Jovović, Zoran and Dolijanović, Željko and Milošević, Drago and Velimirović, Ana and Biberdžić, Milan",
year = "2013",
abstract = "In this paper results of studies of the effects of different combinations of mineral fertilizers and rotted farmyard manure on yield and other parameters of the productivity of potato are presented. The experiments were conducted in 2008 and 2009 in mountainous regions of Montenegro (Kolašin), on the alluvial-diluvial soil, at an altitude of about 900 m.
The results obtained suggested that the application of manure had significant impact on increasing the productivity of the studied parameters of potato. The influence of mineral nutrition was also very distinct. The highest values of the studied parameters of potato productivity were obtained by applying fertilizers with humic acids (NPK 15:15:15 400 kg.ha-1 + MCB 300 kg.ha-1 and MCB 800 kg.ha-1 + KMg 100 kg.ha-1), which were, compared to the other treatments, statistically justified. The highest number, average weight and tuber yield in two years studied was obtained in the variant treated individually with MCB 800 kg.ha-1 + KMg 100 kg.ha-1 or the same variant combined with the manure. In all variants application of combination of organic and mineral fertilizers resulted in higher number and average weight of tubers, as well as the higher yield per hectare compared to the non-fertilized variant.",
publisher = "Potato Research Institute Havličkuv Brod Ltd",
journal = "2nd International symposium on agronomy and physiology of potato (Potato Agrophysiology 2013), September 15-19, 2013, Prague, Czech Republic",
title = "Influence of different nutrition systems on yield and other parameters of productivity of potato",
pages = "216-223",
url = "https://hdl.handle.net/21.15107/rcub_agrospace_6526"
}

Jovović, Z., Dolijanović, Ž., Milošević, D., Velimirović, A.,& Biberdžić, M.. (2013). Influence of different nutrition systems on yield and other parameters of productivity of potato. in 2nd International symposium on agronomy and physiology of potato (Potato Agrophysiology 2013), September 15-19, 2013, Prague, Czech Republic
Potato Research Institute Havličkuv Brod Ltd., 216-223.
https://hdl.handle.net/21.15107/rcub_agrospace_6526

Jovović Z, Dolijanović Ž, Milošević D, Velimirović A, Biberdžić M. Influence of different nutrition systems on yield and other parameters of productivity of potato. in 2nd International symposium on agronomy and physiology of potato (Potato Agrophysiology 2013), September 15-19, 2013, Prague, Czech Republic. 2013;:216-223.
https://hdl.handle.net/21.15107/rcub_agrospace_6526 .

Jovović, Zoran, Dolijanović, Željko, Milošević, Drago, Velimirović, Ana, Biberdžić, Milan, "Influence of different nutrition systems on yield and other parameters of productivity of potato" in 2nd International symposium on agronomy and physiology of potato (Potato Agrophysiology 2013), September 15-19, 2013, Prague, Czech Republic (2013):216-223,
https://hdl.handle.net/21.15107/rcub_agrospace_6526 .

TY  - JOUR
AU  - Jovović, Zoran
AU  - Dolijanović, Željko
AU  - Kovačević, Dušan
AU  - Velimirović, Ana
AU  - Biberdžić, Milan
PY  - 2012
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/2985
AB  - The results of three-year study of productivity for the five leading potato varieties in Montenegro: Riviera and Tresor (early), Kennebec (medium-early), Aladin and Agria (medium-late) are presented. The research was conducted during 2009, 2010 and 2011, on three highly diverse, related to the pedological and climatic conditions, locations in mountainous region of Montenegro: Nikšic (800 m.a.s.l.), Kolašin (900 m.a.s.l.) and Žabljak (1450 m.a.s.l.). Field experiments were set up using standard methodology in random block design in four repetitions. The analysis of variance suggested that there were highly significant differences among genotypes (G), investigated years (Y) and locations (L) for potato yield. Apart from individual influence of the factors, their interactions (G x Y, G x L, Y x L, G x Y x L) were also highly significant for investigated trait. In average the highest yield (28.9 t/ha) was established at Kolašin locality. The highest yield of all investigated varieties and localities was measured at variety Agria (30.0tha-1), while the lowest at Riviera (24.6 t ha-1). In this investigation Agria variety was favourable for yield of potato tuber.
AB  - U radu su predstavljeni rezultati trogodišnjih proučavanja produktivnosti pet vodećih sorti krompira u Crnoj Gori: Riviera i Tresor (rana), Kennebec (srednje rana) i Aladin i Agria (srednje kasna). Istraživanja su sprovedena tokom 2009, 2010 i 2011. godine, na 3 pedoklimatski veoma različita lokaliteta u planinskom predjelu Crne Gore: Nikšić (800 m.n.v.), Kolašin (900 m.n.v.) i Žabljak (1450 m.n.v.). Poljski ogledi su postavljeni po standardnoj metodologiji, u potpuno slučajnom blok sistemu, u 4 ponavljanja. Analiza varijanse je pokazala da je prinos krompira značajno varirao u zavisnosti od genotipa, ispitivane godine i lokacije. Pored individualnog uticaja proučavanih faktora, visoko značajnim ocijenjene su i njihove interakcije (genotip x godina, genotip x lokalitet, godina x lokalitet, genotip x godina x lokalitet).U trogodišnjem prosjeku najveći prinos krtola postignut je u Kolašinu (28,9 th-1), najprinosnija sorta bila je Agria (30th-1), dok su najniži prinosi izmjereni kod Riviere (24.6th-1). Rezultati ovih istraživanja su pokazali da u brdsko-planinskom rejonu Crne Gore najbolje prinose daju srednje kasne sorte koje formiraju srednji broj krtola (Agria).
PB  - Društvo genetičara Srbije, Beograd
T2  - Genetika
T1  - The productive traits of different potato genotypes in mountainous region of Montenegro
T1  - Produktivne osobine različitih genotipova krompira u planinskom regionu Crne Gore
EP  - 397
IS  - 2
SP  - 389
VL  - 44
DO  - 10.2298/GENSR1202389J
ER  - 

@article{
author = "Jovović, Zoran and Dolijanović, Željko and Kovačević, Dušan and Velimirović, Ana and Biberdžić, Milan",
year = "2012",
abstract = "The results of three-year study of productivity for the five leading potato varieties in Montenegro: Riviera and Tresor (early), Kennebec (medium-early), Aladin and Agria (medium-late) are presented. The research was conducted during 2009, 2010 and 2011, on three highly diverse, related to the pedological and climatic conditions, locations in mountainous region of Montenegro: Nikšic (800 m.a.s.l.), Kolašin (900 m.a.s.l.) and Žabljak (1450 m.a.s.l.). Field experiments were set up using standard methodology in random block design in four repetitions. The analysis of variance suggested that there were highly significant differences among genotypes (G), investigated years (Y) and locations (L) for potato yield. Apart from individual influence of the factors, their interactions (G x Y, G x L, Y x L, G x Y x L) were also highly significant for investigated trait. In average the highest yield (28.9 t/ha) was established at Kolašin locality. The highest yield of all investigated varieties and localities was measured at variety Agria (30.0tha-1), while the lowest at Riviera (24.6 t ha-1). In this investigation Agria variety was favourable for yield of potato tuber., U radu su predstavljeni rezultati trogodišnjih proučavanja produktivnosti pet vodećih sorti krompira u Crnoj Gori: Riviera i Tresor (rana), Kennebec (srednje rana) i Aladin i Agria (srednje kasna). Istraživanja su sprovedena tokom 2009, 2010 i 2011. godine, na 3 pedoklimatski veoma različita lokaliteta u planinskom predjelu Crne Gore: Nikšić (800 m.n.v.), Kolašin (900 m.n.v.) i Žabljak (1450 m.n.v.). Poljski ogledi su postavljeni po standardnoj metodologiji, u potpuno slučajnom blok sistemu, u 4 ponavljanja. Analiza varijanse je pokazala da je prinos krompira značajno varirao u zavisnosti od genotipa, ispitivane godine i lokacije. Pored individualnog uticaja proučavanih faktora, visoko značajnim ocijenjene su i njihove interakcije (genotip x godina, genotip x lokalitet, godina x lokalitet, genotip x godina x lokalitet).U trogodišnjem prosjeku najveći prinos krtola postignut je u Kolašinu (28,9 th-1), najprinosnija sorta bila je Agria (30th-1), dok su najniži prinosi izmjereni kod Riviere (24.6th-1). Rezultati ovih istraživanja su pokazali da u brdsko-planinskom rejonu Crne Gore najbolje prinose daju srednje kasne sorte koje formiraju srednji broj krtola (Agria).",
publisher = "Društvo genetičara Srbije, Beograd",
journal = "Genetika",
title = "The productive traits of different potato genotypes in mountainous region of Montenegro, Produktivne osobine različitih genotipova krompira u planinskom regionu Crne Gore",
pages = "397-389",
number = "2",
volume = "44",
doi = "10.2298/GENSR1202389J"
}

Jovović, Z., Dolijanović, Ž., Kovačević, D., Velimirović, A.,& Biberdžić, M.. (2012). The productive traits of different potato genotypes in mountainous region of Montenegro. in Genetika
Društvo genetičara Srbije, Beograd., 44(2), 389-397.
https://doi.org/10.2298/GENSR1202389J

Jovović Z, Dolijanović Ž, Kovačević D, Velimirović A, Biberdžić M. The productive traits of different potato genotypes in mountainous region of Montenegro. in Genetika. 2012;44(2):389-397.
doi:10.2298/GENSR1202389J .

Jovović, Zoran, Dolijanović, Željko, Kovačević, Dušan, Velimirović, Ana, Biberdžić, Milan, "The productive traits of different potato genotypes in mountainous region of Montenegro" in Genetika, 44, no. 2 (2012):389-397,
https://doi.org/10.2298/GENSR1202389J . .