TY  - CONF
AU  - Obradović, Nina
AU  - Đorđević, Nataša
AU  - Kosanović, Darko
AU  - Filipović, Suzana
AU  - Kachlik, Martin
AU  - Maca, Karel
AU  - Olćan, Dragan
AU  - Đorđević, Antonije
AU  - Pavlović, Vladimir B.
PY  - 2017
UR  - http://dais.sanu.ac.rs/123456789/15444
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5720
AB  - In this study, sintering of two systems was investigated in parallel, pure cordierite 2MgO:2Al2O3:5SiO2, and cordierite with addition of 5 mass % TeO2. Green bodies were prepared from powder mixtures mechanically activated for 0, 10 and 40minutes by uniaxial pressing at 20 MPa followed by cold isostatic pressing (CIP) at 1000 MPa. The pressure-less sintering of these specimens was performed at a temperature of 1350 oC for 1 h, with 10 oC/min heating rate. Densities over 96 % of theoretical values were obtained for samples activated for 40 minutes. XRD measurements of MAS-40 sintered sample pointed at a mixture that consisted of several phases, majority of cordierite (> 73 %), spinel MgAl2O4 (> 22 %), ZrSiO4 (2.5 %), and Al2O3 (1.8%), while XRD pattern of MAS-40-TeO2 contained majority of cordierite (> 72 %), spinel MgAl2O4 (> 23 %), ZrSiO4 (1.9 %), and Al2O3 (1.9 %). The relative permittivities of the samples were measured in an open test fixture. The results for the real part of the complex relative permittivity of the samples, measured at 200 MHz, are shown in Table I. The loss tangent for all samples was very small, below the resolution of the measurement setup (0.005).
There is a strong correlation between the relative permittivity and the density, which agrees with our previous results.
PB  - Belgrade : Materials Research Society of Serbia
C3  - Programme and The Book of Abstracts / Nineteenth Annual Conference YUCOMAT 2017, Herceg Novi, September 4-8, 2017
T1  - Characterization of pressure-less sintered MgO-Al2O3-SiO2-TeO2 system
EP  - 70
SP  - 70
UR  - https://hdl.handle.net/21.15107/rcub_dais_15444
ER  - 

@conference{
author = "Obradović, Nina and Đorđević, Nataša and Kosanović, Darko and Filipović, Suzana and Kachlik, Martin and Maca, Karel and Olćan, Dragan and Đorđević, Antonije and Pavlović, Vladimir B.",
year = "2017",
abstract = "In this study, sintering of two systems was investigated in parallel, pure cordierite 2MgO:2Al2O3:5SiO2, and cordierite with addition of 5 mass % TeO2. Green bodies were prepared from powder mixtures mechanically activated for 0, 10 and 40minutes by uniaxial pressing at 20 MPa followed by cold isostatic pressing (CIP) at 1000 MPa. The pressure-less sintering of these specimens was performed at a temperature of 1350 oC for 1 h, with 10 oC/min heating rate. Densities over 96 % of theoretical values were obtained for samples activated for 40 minutes. XRD measurements of MAS-40 sintered sample pointed at a mixture that consisted of several phases, majority of cordierite (> 73 %), spinel MgAl2O4 (> 22 %), ZrSiO4 (2.5 %), and Al2O3 (1.8%), while XRD pattern of MAS-40-TeO2 contained majority of cordierite (> 72 %), spinel MgAl2O4 (> 23 %), ZrSiO4 (1.9 %), and Al2O3 (1.9 %). The relative permittivities of the samples were measured in an open test fixture. The results for the real part of the complex relative permittivity of the samples, measured at 200 MHz, are shown in Table I. The loss tangent for all samples was very small, below the resolution of the measurement setup (0.005).
There is a strong correlation between the relative permittivity and the density, which agrees with our previous results.",
publisher = "Belgrade : Materials Research Society of Serbia",
journal = "Programme and The Book of Abstracts / Nineteenth Annual Conference YUCOMAT 2017, Herceg Novi, September 4-8, 2017",
title = "Characterization of pressure-less sintered MgO-Al2O3-SiO2-TeO2 system",
pages = "70-70",
url = "https://hdl.handle.net/21.15107/rcub_dais_15444"
}

Obradović, N., Đorđević, N., Kosanović, D., Filipović, S., Kachlik, M., Maca, K., Olćan, D., Đorđević, A.,& Pavlović, V. B.. (2017). Characterization of pressure-less sintered MgO-Al2O3-SiO2-TeO2 system. in Programme and The Book of Abstracts / Nineteenth Annual Conference YUCOMAT 2017, Herceg Novi, September 4-8, 2017
Belgrade : Materials Research Society of Serbia., 70-70.
https://hdl.handle.net/21.15107/rcub_dais_15444

Obradović N, Đorđević N, Kosanović D, Filipović S, Kachlik M, Maca K, Olćan D, Đorđević A, Pavlović VB. Characterization of pressure-less sintered MgO-Al2O3-SiO2-TeO2 system. in Programme and The Book of Abstracts / Nineteenth Annual Conference YUCOMAT 2017, Herceg Novi, September 4-8, 2017. 2017;:70-70.
https://hdl.handle.net/21.15107/rcub_dais_15444 .

Obradović, Nina, Đorđević, Nataša, Kosanović, Darko, Filipović, Suzana, Kachlik, Martin, Maca, Karel, Olćan, Dragan, Đorđević, Antonije, Pavlović, Vladimir B., "Characterization of pressure-less sintered MgO-Al2O3-SiO2-TeO2 system" in Programme and The Book of Abstracts / Nineteenth Annual Conference YUCOMAT 2017, Herceg Novi, September 4-8, 2017 (2017):70-70,
https://hdl.handle.net/21.15107/rcub_dais_15444 .

TY  - CONF
AU  - Olćan, Dragan
AU  - Obradović, Nina
AU  - Filipović, Suzana
AU  - Terzić, Anja
AU  - Pavlović, Vladimir B.
AU  - Kachlik, Martin
AU  - Maca, Karel
AU  - Đorđević, Antonije
PY  - 2017
UR  - http://dais.sanu.ac.rs/123456789/4824
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5738
AB  - We present an overview of electromagnetic numerical techniques and measurement apparatus that have been used for assessing electrical properties of ceramic samples. The complex permittivity of the ceramics is typically the first electromagnetic property of interest. In the measurement approach that we use, ceramic samples, in the shape of pills with metalized faces, are placed in either a proprietary coaxial chamber or in an open fixture. The scattering parameter (reflection coefficient) is measured using a network analyzer. For the deembedding of the complex permittivity of a sample one needs precise electromagnetic simulations, including detailed models of the chamber or the open fixture. For lower and intermediate frequencies we use a numerical technique for electrostatic analysis, based on the method of moments with Galerkin testing. We create a database that is used afterwards for evaluation of the complex permittivity practically in real time. For higher frequencies, a full electrodynamic model of the chamber is developed with WIPL-D software. For all our deembedding techniques, we have also developed a detailed model of losses in the SMA coaxial connectors, which is essential for a precise evaluation of the imaginary part of the complex permittivity for low-loss dielectrics. We present results of several measurements in order to illustrate the used techniques.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VI: New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, September 18-20, 2017
T1  - Assessing electrical properties of ceramic samples
EP  - 52
SP  - 51
UR  - https://hdl.handle.net/21.15107/rcub_dais_4824
ER  - 

@conference{
author = "Olćan, Dragan and Obradović, Nina and Filipović, Suzana and Terzić, Anja and Pavlović, Vladimir B. and Kachlik, Martin and Maca, Karel and Đorđević, Antonije",
year = "2017",
abstract = "We present an overview of electromagnetic numerical techniques and measurement apparatus that have been used for assessing electrical properties of ceramic samples. The complex permittivity of the ceramics is typically the first electromagnetic property of interest. In the measurement approach that we use, ceramic samples, in the shape of pills with metalized faces, are placed in either a proprietary coaxial chamber or in an open fixture. The scattering parameter (reflection coefficient) is measured using a network analyzer. For the deembedding of the complex permittivity of a sample one needs precise electromagnetic simulations, including detailed models of the chamber or the open fixture. For lower and intermediate frequencies we use a numerical technique for electrostatic analysis, based on the method of moments with Galerkin testing. We create a database that is used afterwards for evaluation of the complex permittivity practically in real time. For higher frequencies, a full electrodynamic model of the chamber is developed with WIPL-D software. For all our deembedding techniques, we have also developed a detailed model of losses in the SMA coaxial connectors, which is essential for a precise evaluation of the imaginary part of the complex permittivity for low-loss dielectrics. We present results of several measurements in order to illustrate the used techniques.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VI: New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, September 18-20, 2017",
title = "Assessing electrical properties of ceramic samples",
pages = "52-51",
url = "https://hdl.handle.net/21.15107/rcub_dais_4824"
}

Olćan, D., Obradović, N., Filipović, S., Terzić, A., Pavlović, V. B., Kachlik, M., Maca, K.,& Đorđević, A.. (2017). Assessing electrical properties of ceramic samples. in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VI: New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, September 18-20, 2017
Belgrade : Serbian Ceramic Society., 51-52.
https://hdl.handle.net/21.15107/rcub_dais_4824

Olćan D, Obradović N, Filipović S, Terzić A, Pavlović VB, Kachlik M, Maca K, Đorđević A. Assessing electrical properties of ceramic samples. in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VI: New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, September 18-20, 2017. 2017;:51-52.
https://hdl.handle.net/21.15107/rcub_dais_4824 .

Olćan, Dragan, Obradović, Nina, Filipović, Suzana, Terzić, Anja, Pavlović, Vladimir B., Kachlik, Martin, Maca, Karel, Đorđević, Antonije, "Assessing electrical properties of ceramic samples" in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VI: New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, September 18-20, 2017 (2017):51-52,
https://hdl.handle.net/21.15107/rcub_dais_4824 .