TY  - JOUR
AU  - Obradović, Nina
AU  - Blagojević, Vladimir A.
AU  - Filipović, Suzana
AU  - Đorđević, Nataša
AU  - Kosanović, Darko
AU  - Marković, Smilja
AU  - Kachlik, Martin
AU  - Maca, Karel
AU  - Pavlović, Vladimir
PY  - 2019
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5756
AB  - Thermally activated processes in cordierite-based ceramics were investigated to determine the effect of the mechanical activation and the addition of TeO2 on kinetic and thermodynamic parameters of these processes. Using a combination of dilatometry and DTA measurements in the 100–1400 °C temperature range, it was established that both the mechanical activation and the addition of TeO2 have a significant effect on processes in cordierite-based ceramics. A combination of 5 mass% addition of TeO2 and mechanical activation for 40 min reduced the sintering temperature of cordierite ceramics to around 1100 °C. In addition, the analysis of DTA measurements of mechanically activated samples indicates that the mechanical activation leads to intensification of the cordierite formation through an increase in concentration of surface defects and an increase in grain contact surface in the initial powder.
PB  - Springer
T2  - Journal of Thermal Analysis and Calorimetry
T1  - Kinetics of thermally activated processes in cordierite-based ceramics
EP  - 2998
SP  - 2989
VL  - 138
DO  - 10.1007/s10973-018-7924-1
ER  - 

@article{
author = "Obradović, Nina and Blagojević, Vladimir A. and Filipović, Suzana and Đorđević, Nataša and Kosanović, Darko and Marković, Smilja and Kachlik, Martin and Maca, Karel and Pavlović, Vladimir",
year = "2019",
abstract = "Thermally activated processes in cordierite-based ceramics were investigated to determine the effect of the mechanical activation and the addition of TeO2 on kinetic and thermodynamic parameters of these processes. Using a combination of dilatometry and DTA measurements in the 100–1400 °C temperature range, it was established that both the mechanical activation and the addition of TeO2 have a significant effect on processes in cordierite-based ceramics. A combination of 5 mass% addition of TeO2 and mechanical activation for 40 min reduced the sintering temperature of cordierite ceramics to around 1100 °C. In addition, the analysis of DTA measurements of mechanically activated samples indicates that the mechanical activation leads to intensification of the cordierite formation through an increase in concentration of surface defects and an increase in grain contact surface in the initial powder.",
publisher = "Springer",
journal = "Journal of Thermal Analysis and Calorimetry",
title = "Kinetics of thermally activated processes in cordierite-based ceramics",
pages = "2998-2989",
volume = "138",
doi = "10.1007/s10973-018-7924-1"
}

Obradović, N., Blagojević, V. A., Filipović, S., Đorđević, N., Kosanović, D., Marković, S., Kachlik, M., Maca, K.,& Pavlović, V.. (2019). Kinetics of thermally activated processes in cordierite-based ceramics. in Journal of Thermal Analysis and Calorimetry
Springer., 138, 2989-2998.
https://doi.org/10.1007/s10973-018-7924-1

Obradović N, Blagojević VA, Filipović S, Đorđević N, Kosanović D, Marković S, Kachlik M, Maca K, Pavlović V. Kinetics of thermally activated processes in cordierite-based ceramics. in Journal of Thermal Analysis and Calorimetry. 2019;138:2989-2998.
doi:10.1007/s10973-018-7924-1 .

Obradović, Nina, Blagojević, Vladimir A., Filipović, Suzana, Đorđević, Nataša, Kosanović, Darko, Marković, Smilja, Kachlik, Martin, Maca, Karel, Pavlović, Vladimir, "Kinetics of thermally activated processes in cordierite-based ceramics" in Journal of Thermal Analysis and Calorimetry, 138 (2019):2989-2998,
https://doi.org/10.1007/s10973-018-7924-1 . .

TY  - JOUR
AU  - Obradović, Nina
AU  - Blagojević, Vladimir A.
AU  - Filipović, Suzana
AU  - Đorđević, Nataša
AU  - Kosanović, Darko
AU  - Marković, Smilja
AU  - Kachlik, Martin
AU  - Maca, Karel
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/4558
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5733
AB  - Thermally activated processes in cordierite-based ceramics were investigated to determine the effect of the mechanical activation and the addition of TeO2 on kinetic and thermodynamic parameters of these processes. Using a combination of dilatometry and DTA measurements in the 100–1400 °C temperature range, it was established that both the mechanical activation and the addition of TeO2 have a significant effect on processes in cordierite-based ceramics. A combination of 5 mass% addition of TeO2 and mechanical activation for 40 min reduced the sintering temperature of cordierite ceramics to around 1100 °C. In addition, the analysis of DTA measurements of mechanically activated samples indicates that the mechanical activation leads to intensification of the cordierite formation through an increase in concentration of surface defects and an increase in grain contact surface in the initial powder.
PB  - Springer
T2  - Journal of Thermal Analysis and Calorimetry
T1  - Kinetics of thermally activated processes in cordierite-based ceramics
EP  - 2998
SP  - 2989
VL  - 138
DO  - 10.1007/s10973-018-7924-1
ER  - 

@article{
author = "Obradović, Nina and Blagojević, Vladimir A. and Filipović, Suzana and Đorđević, Nataša and Kosanović, Darko and Marković, Smilja and Kachlik, Martin and Maca, Karel and Pavlović, Vladimir B.",
year = "2019",
abstract = "Thermally activated processes in cordierite-based ceramics were investigated to determine the effect of the mechanical activation and the addition of TeO2 on kinetic and thermodynamic parameters of these processes. Using a combination of dilatometry and DTA measurements in the 100–1400 °C temperature range, it was established that both the mechanical activation and the addition of TeO2 have a significant effect on processes in cordierite-based ceramics. A combination of 5 mass% addition of TeO2 and mechanical activation for 40 min reduced the sintering temperature of cordierite ceramics to around 1100 °C. In addition, the analysis of DTA measurements of mechanically activated samples indicates that the mechanical activation leads to intensification of the cordierite formation through an increase in concentration of surface defects and an increase in grain contact surface in the initial powder.",
publisher = "Springer",
journal = "Journal of Thermal Analysis and Calorimetry",
title = "Kinetics of thermally activated processes in cordierite-based ceramics",
pages = "2998-2989",
volume = "138",
doi = "10.1007/s10973-018-7924-1"
}

Obradović, N., Blagojević, V. A., Filipović, S., Đorđević, N., Kosanović, D., Marković, S., Kachlik, M., Maca, K.,& Pavlović, V. B.. (2019). Kinetics of thermally activated processes in cordierite-based ceramics. in Journal of Thermal Analysis and Calorimetry
Springer., 138, 2989-2998.
https://doi.org/10.1007/s10973-018-7924-1

Obradović N, Blagojević VA, Filipović S, Đorđević N, Kosanović D, Marković S, Kachlik M, Maca K, Pavlović VB. Kinetics of thermally activated processes in cordierite-based ceramics. in Journal of Thermal Analysis and Calorimetry. 2019;138:2989-2998.
doi:10.1007/s10973-018-7924-1 .

Obradović, Nina, Blagojević, Vladimir A., Filipović, Suzana, Đorđević, Nataša, Kosanović, Darko, Marković, Smilja, Kachlik, Martin, Maca, Karel, Pavlović, Vladimir B., "Kinetics of thermally activated processes in cordierite-based ceramics" in Journal of Thermal Analysis and Calorimetry, 138 (2019):2989-2998,
https://doi.org/10.1007/s10973-018-7924-1 . .

TY  - CONF
AU  - Obradović, Nina
AU  - Đorđević, Nataša
AU  - Kosanović, Darko
AU  - Filipović, Suzana
AU  - Kachlik, Martin
AU  - Maca, Karel
AU  - Olćan, Dragan
AU  - Đorđević, Antonije
AU  - Pavlović, Vladimir B.
PY  - 2017
UR  - http://dais.sanu.ac.rs/123456789/15444
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5720
AB  - In this study, sintering of two systems was investigated in parallel, pure cordierite 2MgO:2Al2O3:5SiO2, and cordierite with addition of 5 mass % TeO2. Green bodies were prepared from powder mixtures mechanically activated for 0, 10 and 40minutes by uniaxial pressing at 20 MPa followed by cold isostatic pressing (CIP) at 1000 MPa. The pressure-less sintering of these specimens was performed at a temperature of 1350 oC for 1 h, with 10 oC/min heating rate. Densities over 96 % of theoretical values were obtained for samples activated for 40 minutes. XRD measurements of MAS-40 sintered sample pointed at a mixture that consisted of several phases, majority of cordierite (> 73 %), spinel MgAl2O4 (> 22 %), ZrSiO4 (2.5 %), and Al2O3 (1.8%), while XRD pattern of MAS-40-TeO2 contained majority of cordierite (> 72 %), spinel MgAl2O4 (> 23 %), ZrSiO4 (1.9 %), and Al2O3 (1.9 %). The relative permittivities of the samples were measured in an open test fixture. The results for the real part of the complex relative permittivity of the samples, measured at 200 MHz, are shown in Table I. The loss tangent for all samples was very small, below the resolution of the measurement setup (0.005).
There is a strong correlation between the relative permittivity and the density, which agrees with our previous results.
PB  - Belgrade : Materials Research Society of Serbia
C3  - Programme and The Book of Abstracts / Nineteenth Annual Conference YUCOMAT 2017, Herceg Novi, September 4-8, 2017
T1  - Characterization of pressure-less sintered MgO-Al2O3-SiO2-TeO2 system
EP  - 70
SP  - 70
UR  - https://hdl.handle.net/21.15107/rcub_dais_15444
ER  - 

@conference{
author = "Obradović, Nina and Đorđević, Nataša and Kosanović, Darko and Filipović, Suzana and Kachlik, Martin and Maca, Karel and Olćan, Dragan and Đorđević, Antonije and Pavlović, Vladimir B.",
year = "2017",
abstract = "In this study, sintering of two systems was investigated in parallel, pure cordierite 2MgO:2Al2O3:5SiO2, and cordierite with addition of 5 mass % TeO2. Green bodies were prepared from powder mixtures mechanically activated for 0, 10 and 40minutes by uniaxial pressing at 20 MPa followed by cold isostatic pressing (CIP) at 1000 MPa. The pressure-less sintering of these specimens was performed at a temperature of 1350 oC for 1 h, with 10 oC/min heating rate. Densities over 96 % of theoretical values were obtained for samples activated for 40 minutes. XRD measurements of MAS-40 sintered sample pointed at a mixture that consisted of several phases, majority of cordierite (> 73 %), spinel MgAl2O4 (> 22 %), ZrSiO4 (2.5 %), and Al2O3 (1.8%), while XRD pattern of MAS-40-TeO2 contained majority of cordierite (> 72 %), spinel MgAl2O4 (> 23 %), ZrSiO4 (1.9 %), and Al2O3 (1.9 %). The relative permittivities of the samples were measured in an open test fixture. The results for the real part of the complex relative permittivity of the samples, measured at 200 MHz, are shown in Table I. The loss tangent for all samples was very small, below the resolution of the measurement setup (0.005).
There is a strong correlation between the relative permittivity and the density, which agrees with our previous results.",
publisher = "Belgrade : Materials Research Society of Serbia",
journal = "Programme and The Book of Abstracts / Nineteenth Annual Conference YUCOMAT 2017, Herceg Novi, September 4-8, 2017",
title = "Characterization of pressure-less sintered MgO-Al2O3-SiO2-TeO2 system",
pages = "70-70",
url = "https://hdl.handle.net/21.15107/rcub_dais_15444"
}

Obradović, N., Đorđević, N., Kosanović, D., Filipović, S., Kachlik, M., Maca, K., Olćan, D., Đorđević, A.,& Pavlović, V. B.. (2017). Characterization of pressure-less sintered MgO-Al2O3-SiO2-TeO2 system. in Programme and The Book of Abstracts / Nineteenth Annual Conference YUCOMAT 2017, Herceg Novi, September 4-8, 2017
Belgrade : Materials Research Society of Serbia., 70-70.
https://hdl.handle.net/21.15107/rcub_dais_15444

Obradović N, Đorđević N, Kosanović D, Filipović S, Kachlik M, Maca K, Olćan D, Đorđević A, Pavlović VB. Characterization of pressure-less sintered MgO-Al2O3-SiO2-TeO2 system. in Programme and The Book of Abstracts / Nineteenth Annual Conference YUCOMAT 2017, Herceg Novi, September 4-8, 2017. 2017;:70-70.
https://hdl.handle.net/21.15107/rcub_dais_15444 .

Obradović, Nina, Đorđević, Nataša, Kosanović, Darko, Filipović, Suzana, Kachlik, Martin, Maca, Karel, Olćan, Dragan, Đorđević, Antonije, Pavlović, Vladimir B., "Characterization of pressure-less sintered MgO-Al2O3-SiO2-TeO2 system" in Programme and The Book of Abstracts / Nineteenth Annual Conference YUCOMAT 2017, Herceg Novi, September 4-8, 2017 (2017):70-70,
https://hdl.handle.net/21.15107/rcub_dais_15444 .

TY  - CONF
AU  - Đorđević, Nataša
AU  - Obradović, Nina
AU  - Filipović, Suzana
AU  - Kosanović, Darko
AU  - Marković, Smilja
AU  - Mitrić, Miodrag
AU  - Pavlović, Vladimir B.
PY  - 2016
UR  - http://dais.sanu.ac.rs/123456789/894
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5719
AB  - Cordierite 2MgO+2Al2O3+5SiO2 is frequently used ceramic material, that is commonly used as a carrier of electrical components due to its low dielectric constant (~ 5), and low temperature thermal expansion coefficient (20•10-7 ºC-1). In order to accelerate the process of sintering, 5.00 mass% TeO2 was added to the starting mixtures. System was tested in two parallel mixtures, one with no added additives, and the other one with TeO2. The mechanical activation of the both mixtures was performed in a high-energy ball mill in time intervals from 0 to 40 min with ball to powder mass ratio 1:40. The particle size analysis (PSA) was employed in order to determine the changes in the particle size of the mechanically treated powders. The phase composition of the starting powders as well as microstructures was analyzed by the means of X-ray diffraction method and SEM.
PB  - Belgrade : Materials Research Society of Serbia
C3  - Programme and The Book of Abstracts / Eighteenth Annual Conference YUCOMAT 2016, Herceg Novi, September 5-10, 2016
T1  - Influence of mechanical activation on the MgO-Al2O3-SiO2 system with TeO2
EP  - 75
SP  - 75
UR  - https://hdl.handle.net/21.15107/rcub_dais_894
ER  - 

@conference{
author = "Đorđević, Nataša and Obradović, Nina and Filipović, Suzana and Kosanović, Darko and Marković, Smilja and Mitrić, Miodrag and Pavlović, Vladimir B.",
year = "2016",
abstract = "Cordierite 2MgO+2Al2O3+5SiO2 is frequently used ceramic material, that is commonly used as a carrier of electrical components due to its low dielectric constant (~ 5), and low temperature thermal expansion coefficient (20•10-7 ºC-1). In order to accelerate the process of sintering, 5.00 mass% TeO2 was added to the starting mixtures. System was tested in two parallel mixtures, one with no added additives, and the other one with TeO2. The mechanical activation of the both mixtures was performed in a high-energy ball mill in time intervals from 0 to 40 min with ball to powder mass ratio 1:40. The particle size analysis (PSA) was employed in order to determine the changes in the particle size of the mechanically treated powders. The phase composition of the starting powders as well as microstructures was analyzed by the means of X-ray diffraction method and SEM.",
publisher = "Belgrade : Materials Research Society of Serbia",
journal = "Programme and The Book of Abstracts / Eighteenth Annual Conference YUCOMAT 2016, Herceg Novi, September 5-10, 2016",
title = "Influence of mechanical activation on the MgO-Al2O3-SiO2 system with TeO2",
pages = "75-75",
url = "https://hdl.handle.net/21.15107/rcub_dais_894"
}

Đorđević, N., Obradović, N., Filipović, S., Kosanović, D., Marković, S., Mitrić, M.,& Pavlović, V. B.. (2016). Influence of mechanical activation on the MgO-Al2O3-SiO2 system with TeO2. in Programme and The Book of Abstracts / Eighteenth Annual Conference YUCOMAT 2016, Herceg Novi, September 5-10, 2016
Belgrade : Materials Research Society of Serbia., 75-75.
https://hdl.handle.net/21.15107/rcub_dais_894

Đorđević N, Obradović N, Filipović S, Kosanović D, Marković S, Mitrić M, Pavlović VB. Influence of mechanical activation on the MgO-Al2O3-SiO2 system with TeO2. in Programme and The Book of Abstracts / Eighteenth Annual Conference YUCOMAT 2016, Herceg Novi, September 5-10, 2016. 2016;:75-75.
https://hdl.handle.net/21.15107/rcub_dais_894 .

Đorđević, Nataša, Obradović, Nina, Filipović, Suzana, Kosanović, Darko, Marković, Smilja, Mitrić, Miodrag, Pavlović, Vladimir B., "Influence of mechanical activation on the MgO-Al2O3-SiO2 system with TeO2" in Programme and The Book of Abstracts / Eighteenth Annual Conference YUCOMAT 2016, Herceg Novi, September 5-10, 2016 (2016):75-75,
https://hdl.handle.net/21.15107/rcub_dais_894 .

TY  - CONF
AU  - Obradović, Nina
AU  - Đorđević, Nataša
AU  - Kosanović, Darko
AU  - Filipović, Suzana
AU  - Marković, Smilja
AU  - Mitrić, Miodrag
AU  - Pavlović, Vladimir B.
PY  - 2015
UR  - http://dais.sanu.ac.rs/123456789/761
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5708
AB  - Cordierite, 2MgO•2Ah03•5Si02 (MAS), is a very attractive high-temperature ceramic material. In order to accelerate the process of sintering, 5.00 mass% Mo03 was added to the starting mixtures. The mechanical activation of the starting mixtures was performed in a high energy ball mill in time intervals from 0 to 160 minutes. In following, starting mixtures were sintered at 1300 °C for 2h. In order to determine the changes in the particle size distribution, the mechanically treated powders were characterized by a laser light-scattering particle size analyzer. The phase composition of the starting mixtures and sintered samples was analyzed by the X-ray diffraction method. Differential thermal analyses (DTA) and thermo-gravimetric (TG) analysis were used in order to determine characteristic temperatures. Kissinger's equation was employed to calculate apparent activation energies of various processes that occur within the system while heating. Based on the obtained DTA results, it was established that mechanical activation along with MoO3 additive, has influence on sintering temperature which was decreased for about 150 °C.
PB  - Ljubljana : Central and Eastern European Committee for Thermal Analysis and Calorimetry
C3  - 3rd Central and Eastern European Conference on Thermal Analysis and Calorimetry 25-28 August 2015, Ljubljana, Slovenia: Book of Abstracts
T1  - Reaction kinetics of mechanically activated cordierite based ceramics studied via DTA
EP  - 195
SP  - 195
UR  - https://hdl.handle.net/21.15107/rcub_dais_761
ER  - 

@conference{
author = "Obradović, Nina and Đorđević, Nataša and Kosanović, Darko and Filipović, Suzana and Marković, Smilja and Mitrić, Miodrag and Pavlović, Vladimir B.",
year = "2015",
abstract = "Cordierite, 2MgO•2Ah03•5Si02 (MAS), is a very attractive high-temperature ceramic material. In order to accelerate the process of sintering, 5.00 mass% Mo03 was added to the starting mixtures. The mechanical activation of the starting mixtures was performed in a high energy ball mill in time intervals from 0 to 160 minutes. In following, starting mixtures were sintered at 1300 °C for 2h. In order to determine the changes in the particle size distribution, the mechanically treated powders were characterized by a laser light-scattering particle size analyzer. The phase composition of the starting mixtures and sintered samples was analyzed by the X-ray diffraction method. Differential thermal analyses (DTA) and thermo-gravimetric (TG) analysis were used in order to determine characteristic temperatures. Kissinger's equation was employed to calculate apparent activation energies of various processes that occur within the system while heating. Based on the obtained DTA results, it was established that mechanical activation along with MoO3 additive, has influence on sintering temperature which was decreased for about 150 °C.",
publisher = "Ljubljana : Central and Eastern European Committee for Thermal Analysis and Calorimetry",
journal = "3rd Central and Eastern European Conference on Thermal Analysis and Calorimetry 25-28 August 2015, Ljubljana, Slovenia: Book of Abstracts",
title = "Reaction kinetics of mechanically activated cordierite based ceramics studied via DTA",
pages = "195-195",
url = "https://hdl.handle.net/21.15107/rcub_dais_761"
}

Obradović, N., Đorđević, N., Kosanović, D., Filipović, S., Marković, S., Mitrić, M.,& Pavlović, V. B.. (2015). Reaction kinetics of mechanically activated cordierite based ceramics studied via DTA. in 3rd Central and Eastern European Conference on Thermal Analysis and Calorimetry 25-28 August 2015, Ljubljana, Slovenia: Book of Abstracts
Ljubljana : Central and Eastern European Committee for Thermal Analysis and Calorimetry., 195-195.
https://hdl.handle.net/21.15107/rcub_dais_761

Obradović N, Đorđević N, Kosanović D, Filipović S, Marković S, Mitrić M, Pavlović VB. Reaction kinetics of mechanically activated cordierite based ceramics studied via DTA. in 3rd Central and Eastern European Conference on Thermal Analysis and Calorimetry 25-28 August 2015, Ljubljana, Slovenia: Book of Abstracts. 2015;:195-195.
https://hdl.handle.net/21.15107/rcub_dais_761 .

Obradović, Nina, Đorđević, Nataša, Kosanović, Darko, Filipović, Suzana, Marković, Smilja, Mitrić, Miodrag, Pavlović, Vladimir B., "Reaction kinetics of mechanically activated cordierite based ceramics studied via DTA" in 3rd Central and Eastern European Conference on Thermal Analysis and Calorimetry 25-28 August 2015, Ljubljana, Slovenia: Book of Abstracts (2015):195-195,
https://hdl.handle.net/21.15107/rcub_dais_761 .

TY  - CONF
AU  - Đorđević, Nataša
AU  - Obradović, Nina
AU  - Kosanović, Darko
AU  - Mitrić, Miodrag
AU  - Pavlović, Vladimir B.
PY  - 2014
UR  - http://dais.sanu.ac.rs/123456789/766
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5711
AB  - Cordierite (MAS) is difficult to sinter because of the very narrow sintering temperature range (1300-1400ºC). Because a low temperature process is desirable, it is necessary to find functional ads which can allow easier sintering process at lower temperature. The influence of MoO3 on the preparation process of cordierite ceramics was investigated. 2MgO-2Al2O3-5SiO2 was researched by sintering followed binary systems: MgO/MoO3, Al2O3/MoO3 and SiO2/MoO3 (all sintered at 850ºC and 1100ºC, sintering time 2h). Composition of these systems was 80% of oxide and 20% MoO3. The effects of sintering, the composition and morphology were followed by X-ray diffraction, SEM microscopy and EDS analysis. It has been found that MoO3, beside liquid phase, forms intermediary unstable compounds with MgO and Al2O3, which is the significance information for further research. MAS ceramics were sintered with 20% MoO3 at 1100ºC, 1200ºC and 1300ºC, during 2h.
PB  - Belgrade : Materials Research Society of Serbia
C3  - The Sixteenth Annual Conference YUCOMAT 2014: Programme and the Book of Abstracts
T1  - Sintering of cordierite in the presence of MoO3 and crystallization analysis
EP  - 68
SP  - 68
UR  - https://hdl.handle.net/21.15107/rcub_dais_766
ER  - 

@conference{
author = "Đorđević, Nataša and Obradović, Nina and Kosanović, Darko and Mitrić, Miodrag and Pavlović, Vladimir B.",
year = "2014",
abstract = "Cordierite (MAS) is difficult to sinter because of the very narrow sintering temperature range (1300-1400ºC). Because a low temperature process is desirable, it is necessary to find functional ads which can allow easier sintering process at lower temperature. The influence of MoO3 on the preparation process of cordierite ceramics was investigated. 2MgO-2Al2O3-5SiO2 was researched by sintering followed binary systems: MgO/MoO3, Al2O3/MoO3 and SiO2/MoO3 (all sintered at 850ºC and 1100ºC, sintering time 2h). Composition of these systems was 80% of oxide and 20% MoO3. The effects of sintering, the composition and morphology were followed by X-ray diffraction, SEM microscopy and EDS analysis. It has been found that MoO3, beside liquid phase, forms intermediary unstable compounds with MgO and Al2O3, which is the significance information for further research. MAS ceramics were sintered with 20% MoO3 at 1100ºC, 1200ºC and 1300ºC, during 2h.",
publisher = "Belgrade : Materials Research Society of Serbia",
journal = "The Sixteenth Annual Conference YUCOMAT 2014: Programme and the Book of Abstracts",
title = "Sintering of cordierite in the presence of MoO3 and crystallization analysis",
pages = "68-68",
url = "https://hdl.handle.net/21.15107/rcub_dais_766"
}

Đorđević, N., Obradović, N., Kosanović, D., Mitrić, M.,& Pavlović, V. B.. (2014). Sintering of cordierite in the presence of MoO3 and crystallization analysis. in The Sixteenth Annual Conference YUCOMAT 2014: Programme and the Book of Abstracts
Belgrade : Materials Research Society of Serbia., 68-68.
https://hdl.handle.net/21.15107/rcub_dais_766

Đorđević N, Obradović N, Kosanović D, Mitrić M, Pavlović VB. Sintering of cordierite in the presence of MoO3 and crystallization analysis. in The Sixteenth Annual Conference YUCOMAT 2014: Programme and the Book of Abstracts. 2014;:68-68.
https://hdl.handle.net/21.15107/rcub_dais_766 .

Đorđević, Nataša, Obradović, Nina, Kosanović, Darko, Mitrić, Miodrag, Pavlović, Vladimir B., "Sintering of cordierite in the presence of MoO3 and crystallization analysis" in The Sixteenth Annual Conference YUCOMAT 2014: Programme and the Book of Abstracts (2014):68-68,
https://hdl.handle.net/21.15107/rcub_dais_766 .

TY  - CONF
AU  - Đorđević, Nataša
AU  - Mihajlović, A.
AU  - Peleš, Adriana
AU  - Obradović, Nina
AU  - Pavlović, Vladimir B.
PY  - 2013
UR  - http://dais.sanu.ac.rs/123456789/389
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5668
AB  - The influence of MoO3 on the process of cordierite ceramics preparation, 2MgO-2Al2O3-5SiO2 (MAS) was researched by sintering followed binary systems: MgO/MoO3 (sintered at 850 ºC and 1000 ºC), Al2O3/Bi2O3 and SiO2/Bi2O3 (sintered at 850 ºC and 1000 ºC). Composition of these systems was 80 % of oxide and 20 % MoO3. The effects of sintering, the composition and morphology were followed by x-ray diffraction, scanning electron microscopy and EDS analysis. It has been found that MoO3, beside liquid phase, forms intermediary unstable compounds with MgO and Al2O3. The following research is planned to investigate the effect of 5 % mass of MoO3 on the electrical properties of cordierite ceramics.
PB  - Belgrade : Materials Research Society of Serbia
C3  - The Fifteenth Annual Conference YUCOMAT 2013: Programme and the Book of Abstracts
T1  - Influence of MoO3 on cordierite ceramics sintering and crystallization
EP  - 103
SP  - 103
UR  - https://hdl.handle.net/21.15107/rcub_dais_389
ER  - 

@conference{
author = "Đorđević, Nataša and Mihajlović, A. and Peleš, Adriana and Obradović, Nina and Pavlović, Vladimir B.",
year = "2013",
abstract = "The influence of MoO3 on the process of cordierite ceramics preparation, 2MgO-2Al2O3-5SiO2 (MAS) was researched by sintering followed binary systems: MgO/MoO3 (sintered at 850 ºC and 1000 ºC), Al2O3/Bi2O3 and SiO2/Bi2O3 (sintered at 850 ºC and 1000 ºC). Composition of these systems was 80 % of oxide and 20 % MoO3. The effects of sintering, the composition and morphology were followed by x-ray diffraction, scanning electron microscopy and EDS analysis. It has been found that MoO3, beside liquid phase, forms intermediary unstable compounds with MgO and Al2O3. The following research is planned to investigate the effect of 5 % mass of MoO3 on the electrical properties of cordierite ceramics.",
publisher = "Belgrade : Materials Research Society of Serbia",
journal = "The Fifteenth Annual Conference YUCOMAT 2013: Programme and the Book of Abstracts",
title = "Influence of MoO3 on cordierite ceramics sintering and crystallization",
pages = "103-103",
url = "https://hdl.handle.net/21.15107/rcub_dais_389"
}

Đorđević, N., Mihajlović, A., Peleš, A., Obradović, N.,& Pavlović, V. B.. (2013). Influence of MoO3 on cordierite ceramics sintering and crystallization. in The Fifteenth Annual Conference YUCOMAT 2013: Programme and the Book of Abstracts
Belgrade : Materials Research Society of Serbia., 103-103.
https://hdl.handle.net/21.15107/rcub_dais_389

Đorđević N, Mihajlović A, Peleš A, Obradović N, Pavlović VB. Influence of MoO3 on cordierite ceramics sintering and crystallization. in The Fifteenth Annual Conference YUCOMAT 2013: Programme and the Book of Abstracts. 2013;:103-103.
https://hdl.handle.net/21.15107/rcub_dais_389 .

Đorđević, Nataša, Mihajlović, A., Peleš, Adriana, Obradović, Nina, Pavlović, Vladimir B., "Influence of MoO3 on cordierite ceramics sintering and crystallization" in The Fifteenth Annual Conference YUCOMAT 2013: Programme and the Book of Abstracts (2013):103-103,
https://hdl.handle.net/21.15107/rcub_dais_389 .

TY  - CONF
AU  - Obradović, Nina
AU  - Đorđević, Nataša
AU  - Labus, Nebojša
AU  - Peleš, Adriana
AU  - Mitrić, Miodrag
AU  - Pavlović, Vladimir B.
PY  - 2013
UR  - http://dais.sanu.ac.rs/123456789/416
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5674
AB  - Mechanical activation is widely used and relatively inexpensive procedure for sintering process sample preparation. However, the influence of pressure, which is used for compaction, has not been completely investigated. Cordierite, 2MgO⋅2Al2O3⋅5SiO2, is a very actual hightemperature ceramic material, due to its characteristics. Based on our previous investigation, the mechanical activation of the starting mixtures with 5.00 mass% TiO2 was performed in a high energy ball mill during 10 minutes. Compaction pressure varied from 0.5 to 6t/cm2 (49 MPa - 588 MPa). Sintering process was performed at 1350oC for 4h in air atmosphere. The phase composition of activated and sintered samples was analyzed by the X-ray diffraction method. Scanning electron microscopy was performed to analyze the microstructure of both compacted and sintered sample. Non-isothermal sintering up to 1400oC, with a constant heating rate, was investigated by thermal shrinkage change with dilatometer. In this paper we research green bodies and sintered samples compaction pressure influence electrical properties.
PB  - Belgrade : Serbian Ceramic Society
C3  - Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : II Serbian Ceramic Society Conference, Sep 30th-Oct 1st, 2013, Belgrade
T1  - Density and electrical properties of cordierite based ceramics as function of compaction pressure
EP  - 39
SP  - 39
UR  - https://hdl.handle.net/21.15107/rcub_dais_416
ER  - 

@conference{
author = "Obradović, Nina and Đorđević, Nataša and Labus, Nebojša and Peleš, Adriana and Mitrić, Miodrag and Pavlović, Vladimir B.",
year = "2013",
abstract = "Mechanical activation is widely used and relatively inexpensive procedure for sintering process sample preparation. However, the influence of pressure, which is used for compaction, has not been completely investigated. Cordierite, 2MgO⋅2Al2O3⋅5SiO2, is a very actual hightemperature ceramic material, due to its characteristics. Based on our previous investigation, the mechanical activation of the starting mixtures with 5.00 mass% TiO2 was performed in a high energy ball mill during 10 minutes. Compaction pressure varied from 0.5 to 6t/cm2 (49 MPa - 588 MPa). Sintering process was performed at 1350oC for 4h in air atmosphere. The phase composition of activated and sintered samples was analyzed by the X-ray diffraction method. Scanning electron microscopy was performed to analyze the microstructure of both compacted and sintered sample. Non-isothermal sintering up to 1400oC, with a constant heating rate, was investigated by thermal shrinkage change with dilatometer. In this paper we research green bodies and sintered samples compaction pressure influence electrical properties.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : II Serbian Ceramic Society Conference, Sep 30th-Oct 1st, 2013, Belgrade",
title = "Density and electrical properties of cordierite based ceramics as function of compaction pressure",
pages = "39-39",
url = "https://hdl.handle.net/21.15107/rcub_dais_416"
}

Obradović, N., Đorđević, N., Labus, N., Peleš, A., Mitrić, M.,& Pavlović, V. B.. (2013). Density and electrical properties of cordierite based ceramics as function of compaction pressure. in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : II Serbian Ceramic Society Conference, Sep 30th-Oct 1st, 2013, Belgrade
Belgrade : Serbian Ceramic Society., 39-39.
https://hdl.handle.net/21.15107/rcub_dais_416

Obradović N, Đorđević N, Labus N, Peleš A, Mitrić M, Pavlović VB. Density and electrical properties of cordierite based ceramics as function of compaction pressure. in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : II Serbian Ceramic Society Conference, Sep 30th-Oct 1st, 2013, Belgrade. 2013;:39-39.
https://hdl.handle.net/21.15107/rcub_dais_416 .

Obradović, Nina, Đorđević, Nataša, Labus, Nebojša, Peleš, Adriana, Mitrić, Miodrag, Pavlović, Vladimir B., "Density and electrical properties of cordierite based ceramics as function of compaction pressure" in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : II Serbian Ceramic Society Conference, Sep 30th-Oct 1st, 2013, Belgrade (2013):39-39,
https://hdl.handle.net/21.15107/rcub_dais_416 .

TY  - CONF
AU  - Obradović, Nina
AU  - Peleš, Adriana
AU  - Đorđević, Nataša
AU  - Marković, Smilja
AU  - Mitrić, Miodrag
AU  - Pavlović, Vladimir B.
PY  - 2013
UR  - http://dais.sanu.ac.rs/123456789/402
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5669
AB  - According to its low temperature thermal expansion coefficient, low dielectric constant, also good mechanical properties, cordierite, 2MgO×2Al2O3×5SiO2, represents a very attractive hightemperature ceramic material. In this study, cordierite was prepared by solid state reaction of the MgO, Al2O3 and SiO2 mixture. One of the components from the mixture, SiO2, was mechanically activated in a high energy ball mill during 5 and 10 minutes. The applied pressure before the sintering process was 2 t/cm2. Sintering process of mixtures containing non-activated and activated SiO2 powder was performed at 1350 oC for 4h in the air atmosphere. The phase composition of starting oxides and sintered samples was analyzed by the X-ray diffraction method. Particle size analysis was performed to investigate the differences between starting components. Scanning electron microscopy was done to analyze the microstructure of both components and sintered samples. This paper investigates the influence of one mechanically activated SiO2 component on the densities of green bodies as well as on the sintered samples, along with electrical properties of cordierite ceramics.
PB  - Belgrade : Materials Research Society of Serbia
C3  - The Fifteenth Annual Conference YUCOMAT 2013: Programme and the Book of Abstracts
T1  - Influence of one activated component on the sintering process of three phase system
EP  - 103
SP  - 103
UR  - https://hdl.handle.net/21.15107/rcub_dais_402
ER  - 

@conference{
author = "Obradović, Nina and Peleš, Adriana and Đorđević, Nataša and Marković, Smilja and Mitrić, Miodrag and Pavlović, Vladimir B.",
year = "2013",
abstract = "According to its low temperature thermal expansion coefficient, low dielectric constant, also good mechanical properties, cordierite, 2MgO×2Al2O3×5SiO2, represents a very attractive hightemperature ceramic material. In this study, cordierite was prepared by solid state reaction of the MgO, Al2O3 and SiO2 mixture. One of the components from the mixture, SiO2, was mechanically activated in a high energy ball mill during 5 and 10 minutes. The applied pressure before the sintering process was 2 t/cm2. Sintering process of mixtures containing non-activated and activated SiO2 powder was performed at 1350 oC for 4h in the air atmosphere. The phase composition of starting oxides and sintered samples was analyzed by the X-ray diffraction method. Particle size analysis was performed to investigate the differences between starting components. Scanning electron microscopy was done to analyze the microstructure of both components and sintered samples. This paper investigates the influence of one mechanically activated SiO2 component on the densities of green bodies as well as on the sintered samples, along with electrical properties of cordierite ceramics.",
publisher = "Belgrade : Materials Research Society of Serbia",
journal = "The Fifteenth Annual Conference YUCOMAT 2013: Programme and the Book of Abstracts",
title = "Influence of one activated component on the sintering process of three phase system",
pages = "103-103",
url = "https://hdl.handle.net/21.15107/rcub_dais_402"
}

Obradović, N., Peleš, A., Đorđević, N., Marković, S., Mitrić, M.,& Pavlović, V. B.. (2013). Influence of one activated component on the sintering process of three phase system. in The Fifteenth Annual Conference YUCOMAT 2013: Programme and the Book of Abstracts
Belgrade : Materials Research Society of Serbia., 103-103.
https://hdl.handle.net/21.15107/rcub_dais_402

Obradović N, Peleš A, Đorđević N, Marković S, Mitrić M, Pavlović VB. Influence of one activated component on the sintering process of three phase system. in The Fifteenth Annual Conference YUCOMAT 2013: Programme and the Book of Abstracts. 2013;:103-103.
https://hdl.handle.net/21.15107/rcub_dais_402 .

Obradović, Nina, Peleš, Adriana, Đorđević, Nataša, Marković, Smilja, Mitrić, Miodrag, Pavlović, Vladimir B., "Influence of one activated component on the sintering process of three phase system" in The Fifteenth Annual Conference YUCOMAT 2013: Programme and the Book of Abstracts (2013):103-103,
https://hdl.handle.net/21.15107/rcub_dais_402 .

TY  - CONF
AU  - Obradović, Nina
AU  - Đorđević, Nataša
AU  - Peleš, Adriana
AU  - Mitrić, Miodrag
AU  - Pavlović, Vladimir B.
PY  - 2012
UR  - http://dais.sanu.ac.rs/123456789/525
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5686
AB  - Mechanical activation is widely used for sample preparation before the sintering process. However, the influence of pressure, which is used for compaction, has not been completely investigated. Cordierite, 2MgO_2Al2O3_5SiO2, is a very attractive high-temperature ceramic material, due to its outstanding electrical characteristics, such as the low temperature expansion coefficient, low dielectric constant and good mechanical properties. Based on our previous investigation, the mechanical activation of the starting mixtures with 5.00 mass% TiO2 was performed in a high energy ball mill during 10 minutes. Compaction pressure varied from 0.5 to 6 t/cm2. Differential thermal analysis (DTA) was used in order to determine characteristic temperatures within the system during heating. Sintering process was performed at 1350 °C for 4 h in air atmosphere. The phase composition of activated and sintered samples was analyzed by the X-ray diffraction method. Scanning electron microscopy was performed to analyze both compacted and sintered sample microstructure. This paper deals with the influence of compaction pressure on the densities of green bodies as well as on the sintered samples, along with electrical properties
PB  - Belgrade : Materials Research Society of Serbia; Institute of Technical Sciences of SASA; Vinča Institute of Nuclear Sciences, University of Belgrade
C3  - Joint Event of the 11th Young Researchers’ Conference: Materials Science and Engineering and the 1st European Early Stage Researches’ Conference on Hydrogen Storage: Program and the Book of Abstracts
T1  - Compaction pressure's influence on density and electrical properties of sintered cordierite-based ceramics
EP  - 61
SP  - 61
UR  - https://hdl.handle.net/21.15107/rcub_dais_525
ER  - 

@conference{
author = "Obradović, Nina and Đorđević, Nataša and Peleš, Adriana and Mitrić, Miodrag and Pavlović, Vladimir B.",
year = "2012",
abstract = "Mechanical activation is widely used for sample preparation before the sintering process. However, the influence of pressure, which is used for compaction, has not been completely investigated. Cordierite, 2MgO_2Al2O3_5SiO2, is a very attractive high-temperature ceramic material, due to its outstanding electrical characteristics, such as the low temperature expansion coefficient, low dielectric constant and good mechanical properties. Based on our previous investigation, the mechanical activation of the starting mixtures with 5.00 mass% TiO2 was performed in a high energy ball mill during 10 minutes. Compaction pressure varied from 0.5 to 6 t/cm2. Differential thermal analysis (DTA) was used in order to determine characteristic temperatures within the system during heating. Sintering process was performed at 1350 °C for 4 h in air atmosphere. The phase composition of activated and sintered samples was analyzed by the X-ray diffraction method. Scanning electron microscopy was performed to analyze both compacted and sintered sample microstructure. This paper deals with the influence of compaction pressure on the densities of green bodies as well as on the sintered samples, along with electrical properties",
publisher = "Belgrade : Materials Research Society of Serbia; Institute of Technical Sciences of SASA; Vinča Institute of Nuclear Sciences, University of Belgrade",
journal = "Joint Event of the 11th Young Researchers’ Conference: Materials Science and Engineering and the 1st European Early Stage Researches’ Conference on Hydrogen Storage: Program and the Book of Abstracts",
title = "Compaction pressure's influence on density and electrical properties of sintered cordierite-based ceramics",
pages = "61-61",
url = "https://hdl.handle.net/21.15107/rcub_dais_525"
}

Obradović, N., Đorđević, N., Peleš, A., Mitrić, M.,& Pavlović, V. B.. (2012). Compaction pressure's influence on density and electrical properties of sintered cordierite-based ceramics. in Joint Event of the 11th Young Researchers’ Conference: Materials Science and Engineering and the 1st European Early Stage Researches’ Conference on Hydrogen Storage: Program and the Book of Abstracts
Belgrade : Materials Research Society of Serbia; Institute of Technical Sciences of SASA; Vinča Institute of Nuclear Sciences, University of Belgrade., 61-61.
https://hdl.handle.net/21.15107/rcub_dais_525

Obradović N, Đorđević N, Peleš A, Mitrić M, Pavlović VB. Compaction pressure's influence on density and electrical properties of sintered cordierite-based ceramics. in Joint Event of the 11th Young Researchers’ Conference: Materials Science and Engineering and the 1st European Early Stage Researches’ Conference on Hydrogen Storage: Program and the Book of Abstracts. 2012;:61-61.
https://hdl.handle.net/21.15107/rcub_dais_525 .

Obradović, Nina, Đorđević, Nataša, Peleš, Adriana, Mitrić, Miodrag, Pavlović, Vladimir B., "Compaction pressure's influence on density and electrical properties of sintered cordierite-based ceramics" in Joint Event of the 11th Young Researchers’ Conference: Materials Science and Engineering and the 1st European Early Stage Researches’ Conference on Hydrogen Storage: Program and the Book of Abstracts (2012):61-61,
https://hdl.handle.net/21.15107/rcub_dais_525 .

TY  - CONF
AU  - Đorđević, Nataša
AU  - Obradović, Nina
AU  - Filipović, Suzana
AU  - Kosanović, Darko
AU  - Mitrić, Miodrag
AU  - Marković, Smilja
AU  - Pavlović, Vladimir B.
PY  - 2011
UR  - http://dais.sanu.ac.rs/123456789/628
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5699
AB  - According to its exceptional electrical characteristics, such as low temperature expansion coefficient, low dielectric constant and good mechanical properties, cordierite, 2MgO⋅2Al2O3⋅5SiO2, represents very attractive ceramic material in the field of high temperatures. In order to accelerate the process of sintering, 1 mass% Bi2O3 has been added to starting mixtures. Liquid phase sintering caused by presence of bismuth-oxide leads to lowering temperature of cordierite formation. Mechanical activation of starting mixtures (0-56 minutes in vibro-mill) additionally leads to lowering sintering temperatures. Process of sintering was performed at 1200, 1300 and 1400 oC, for 2h. BET and PSA were employed in order to follow the changes in specific surface area and particle size of mechanically treated powders. Phase composition of starting powders and sintered materials was analyzed by X-ray diffraction method. Moreover, SEM analysis was used for analysis of powders morphology and sintered pallets microstructure.
PB  - Belgrade : Materials Research Society of Serbia
C3  - VII International Conference on Mechanochemistry and Mechanical Alloying INCOME 2011: Programme and the Book of Abstracts
T1  - Influence of mechanochemical activation on sintering of cordierite ceramics with the presence of Bi2O3 as a functional additive
EP  - 84
SP  - 84
UR  - https://hdl.handle.net/21.15107/rcub_dais_628
ER  - 

@conference{
author = "Đorđević, Nataša and Obradović, Nina and Filipović, Suzana and Kosanović, Darko and Mitrić, Miodrag and Marković, Smilja and Pavlović, Vladimir B.",
year = "2011",
abstract = "According to its exceptional electrical characteristics, such as low temperature expansion coefficient, low dielectric constant and good mechanical properties, cordierite, 2MgO⋅2Al2O3⋅5SiO2, represents very attractive ceramic material in the field of high temperatures. In order to accelerate the process of sintering, 1 mass% Bi2O3 has been added to starting mixtures. Liquid phase sintering caused by presence of bismuth-oxide leads to lowering temperature of cordierite formation. Mechanical activation of starting mixtures (0-56 minutes in vibro-mill) additionally leads to lowering sintering temperatures. Process of sintering was performed at 1200, 1300 and 1400 oC, for 2h. BET and PSA were employed in order to follow the changes in specific surface area and particle size of mechanically treated powders. Phase composition of starting powders and sintered materials was analyzed by X-ray diffraction method. Moreover, SEM analysis was used for analysis of powders morphology and sintered pallets microstructure.",
publisher = "Belgrade : Materials Research Society of Serbia",
journal = "VII International Conference on Mechanochemistry and Mechanical Alloying INCOME 2011: Programme and the Book of Abstracts",
title = "Influence of mechanochemical activation on sintering of cordierite ceramics with the presence of Bi2O3 as a functional additive",
pages = "84-84",
url = "https://hdl.handle.net/21.15107/rcub_dais_628"
}

Đorđević, N., Obradović, N., Filipović, S., Kosanović, D., Mitrić, M., Marković, S.,& Pavlović, V. B.. (2011). Influence of mechanochemical activation on sintering of cordierite ceramics with the presence of Bi2O3 as a functional additive. in VII International Conference on Mechanochemistry and Mechanical Alloying INCOME 2011: Programme and the Book of Abstracts
Belgrade : Materials Research Society of Serbia., 84-84.
https://hdl.handle.net/21.15107/rcub_dais_628

Đorđević N, Obradović N, Filipović S, Kosanović D, Mitrić M, Marković S, Pavlović VB. Influence of mechanochemical activation on sintering of cordierite ceramics with the presence of Bi2O3 as a functional additive. in VII International Conference on Mechanochemistry and Mechanical Alloying INCOME 2011: Programme and the Book of Abstracts. 2011;:84-84.
https://hdl.handle.net/21.15107/rcub_dais_628 .

Đorđević, Nataša, Obradović, Nina, Filipović, Suzana, Kosanović, Darko, Mitrić, Miodrag, Marković, Smilja, Pavlović, Vladimir B., "Influence of mechanochemical activation on sintering of cordierite ceramics with the presence of Bi2O3 as a functional additive" in VII International Conference on Mechanochemistry and Mechanical Alloying INCOME 2011: Programme and the Book of Abstracts (2011):84-84,
https://hdl.handle.net/21.15107/rcub_dais_628 .