TY  - JOUR
AU  - Obradović, Nina
AU  - Blagojević, Vladimir A.
AU  - Filipović, Suzana
AU  - Đorđević, Nataša
AU  - Kosanović, Darko
AU  - Marković, Smilja
AU  - Kachlik, Martin
AU  - Maca, Karel
AU  - Pavlović, Vladimir
PY  - 2019
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5756
AB  - Thermally activated processes in cordierite-based ceramics were investigated to determine the effect of the mechanical activation and the addition of TeO2 on kinetic and thermodynamic parameters of these processes. Using a combination of dilatometry and DTA measurements in the 100–1400 °C temperature range, it was established that both the mechanical activation and the addition of TeO2 have a significant effect on processes in cordierite-based ceramics. A combination of 5 mass% addition of TeO2 and mechanical activation for 40 min reduced the sintering temperature of cordierite ceramics to around 1100 °C. In addition, the analysis of DTA measurements of mechanically activated samples indicates that the mechanical activation leads to intensification of the cordierite formation through an increase in concentration of surface defects and an increase in grain contact surface in the initial powder.
PB  - Springer
T2  - Journal of Thermal Analysis and Calorimetry
T1  - Kinetics of thermally activated processes in cordierite-based ceramics
EP  - 2998
SP  - 2989
VL  - 138
DO  - 10.1007/s10973-018-7924-1
ER  - 

@article{
author = "Obradović, Nina and Blagojević, Vladimir A. and Filipović, Suzana and Đorđević, Nataša and Kosanović, Darko and Marković, Smilja and Kachlik, Martin and Maca, Karel and Pavlović, Vladimir",
year = "2019",
abstract = "Thermally activated processes in cordierite-based ceramics were investigated to determine the effect of the mechanical activation and the addition of TeO2 on kinetic and thermodynamic parameters of these processes. Using a combination of dilatometry and DTA measurements in the 100–1400 °C temperature range, it was established that both the mechanical activation and the addition of TeO2 have a significant effect on processes in cordierite-based ceramics. A combination of 5 mass% addition of TeO2 and mechanical activation for 40 min reduced the sintering temperature of cordierite ceramics to around 1100 °C. In addition, the analysis of DTA measurements of mechanically activated samples indicates that the mechanical activation leads to intensification of the cordierite formation through an increase in concentration of surface defects and an increase in grain contact surface in the initial powder.",
publisher = "Springer",
journal = "Journal of Thermal Analysis and Calorimetry",
title = "Kinetics of thermally activated processes in cordierite-based ceramics",
pages = "2998-2989",
volume = "138",
doi = "10.1007/s10973-018-7924-1"
}

Obradović, N., Blagojević, V. A., Filipović, S., Đorđević, N., Kosanović, D., Marković, S., Kachlik, M., Maca, K.,& Pavlović, V.. (2019). Kinetics of thermally activated processes in cordierite-based ceramics. in Journal of Thermal Analysis and Calorimetry
Springer., 138, 2989-2998.
https://doi.org/10.1007/s10973-018-7924-1

Obradović N, Blagojević VA, Filipović S, Đorđević N, Kosanović D, Marković S, Kachlik M, Maca K, Pavlović V. Kinetics of thermally activated processes in cordierite-based ceramics. in Journal of Thermal Analysis and Calorimetry. 2019;138:2989-2998.
doi:10.1007/s10973-018-7924-1 .

Obradović, Nina, Blagojević, Vladimir A., Filipović, Suzana, Đorđević, Nataša, Kosanović, Darko, Marković, Smilja, Kachlik, Martin, Maca, Karel, Pavlović, Vladimir, "Kinetics of thermally activated processes in cordierite-based ceramics" in Journal of Thermal Analysis and Calorimetry, 138 (2019):2989-2998,
https://doi.org/10.1007/s10973-018-7924-1 . .

TY  - CONF
AU  - Obradović, Nina
AU  - Đorđević, Nataša
AU  - Kosanović, Darko
AU  - Filipović, Suzana
AU  - Kachlik, Martin
AU  - Maca, Karel
AU  - Olćan, Dragan
AU  - Đorđević, Antonije
AU  - Pavlović, Vladimir B.
PY  - 2017
UR  - http://dais.sanu.ac.rs/123456789/15444
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5720
AB  - In this study, sintering of two systems was investigated in parallel, pure cordierite 2MgO:2Al2O3:5SiO2, and cordierite with addition of 5 mass % TeO2. Green bodies were prepared from powder mixtures mechanically activated for 0, 10 and 40minutes by uniaxial pressing at 20 MPa followed by cold isostatic pressing (CIP) at 1000 MPa. The pressure-less sintering of these specimens was performed at a temperature of 1350 oC for 1 h, with 10 oC/min heating rate. Densities over 96 % of theoretical values were obtained for samples activated for 40 minutes. XRD measurements of MAS-40 sintered sample pointed at a mixture that consisted of several phases, majority of cordierite (> 73 %), spinel MgAl2O4 (> 22 %), ZrSiO4 (2.5 %), and Al2O3 (1.8%), while XRD pattern of MAS-40-TeO2 contained majority of cordierite (> 72 %), spinel MgAl2O4 (> 23 %), ZrSiO4 (1.9 %), and Al2O3 (1.9 %). The relative permittivities of the samples were measured in an open test fixture. The results for the real part of the complex relative permittivity of the samples, measured at 200 MHz, are shown in Table I. The loss tangent for all samples was very small, below the resolution of the measurement setup (0.005).
There is a strong correlation between the relative permittivity and the density, which agrees with our previous results.
PB  - Belgrade : Materials Research Society of Serbia
C3  - Programme and The Book of Abstracts / Nineteenth Annual Conference YUCOMAT 2017, Herceg Novi, September 4-8, 2017
T1  - Characterization of pressure-less sintered MgO-Al2O3-SiO2-TeO2 system
EP  - 70
SP  - 70
UR  - https://hdl.handle.net/21.15107/rcub_dais_15444
ER  - 

@conference{
author = "Obradović, Nina and Đorđević, Nataša and Kosanović, Darko and Filipović, Suzana and Kachlik, Martin and Maca, Karel and Olćan, Dragan and Đorđević, Antonije and Pavlović, Vladimir B.",
year = "2017",
abstract = "In this study, sintering of two systems was investigated in parallel, pure cordierite 2MgO:2Al2O3:5SiO2, and cordierite with addition of 5 mass % TeO2. Green bodies were prepared from powder mixtures mechanically activated for 0, 10 and 40minutes by uniaxial pressing at 20 MPa followed by cold isostatic pressing (CIP) at 1000 MPa. The pressure-less sintering of these specimens was performed at a temperature of 1350 oC for 1 h, with 10 oC/min heating rate. Densities over 96 % of theoretical values were obtained for samples activated for 40 minutes. XRD measurements of MAS-40 sintered sample pointed at a mixture that consisted of several phases, majority of cordierite (> 73 %), spinel MgAl2O4 (> 22 %), ZrSiO4 (2.5 %), and Al2O3 (1.8%), while XRD pattern of MAS-40-TeO2 contained majority of cordierite (> 72 %), spinel MgAl2O4 (> 23 %), ZrSiO4 (1.9 %), and Al2O3 (1.9 %). The relative permittivities of the samples were measured in an open test fixture. The results for the real part of the complex relative permittivity of the samples, measured at 200 MHz, are shown in Table I. The loss tangent for all samples was very small, below the resolution of the measurement setup (0.005).
There is a strong correlation between the relative permittivity and the density, which agrees with our previous results.",
publisher = "Belgrade : Materials Research Society of Serbia",
journal = "Programme and The Book of Abstracts / Nineteenth Annual Conference YUCOMAT 2017, Herceg Novi, September 4-8, 2017",
title = "Characterization of pressure-less sintered MgO-Al2O3-SiO2-TeO2 system",
pages = "70-70",
url = "https://hdl.handle.net/21.15107/rcub_dais_15444"
}

Obradović, N., Đorđević, N., Kosanović, D., Filipović, S., Kachlik, M., Maca, K., Olćan, D., Đorđević, A.,& Pavlović, V. B.. (2017). Characterization of pressure-less sintered MgO-Al2O3-SiO2-TeO2 system. in Programme and The Book of Abstracts / Nineteenth Annual Conference YUCOMAT 2017, Herceg Novi, September 4-8, 2017
Belgrade : Materials Research Society of Serbia., 70-70.
https://hdl.handle.net/21.15107/rcub_dais_15444

Obradović N, Đorđević N, Kosanović D, Filipović S, Kachlik M, Maca K, Olćan D, Đorđević A, Pavlović VB. Characterization of pressure-less sintered MgO-Al2O3-SiO2-TeO2 system. in Programme and The Book of Abstracts / Nineteenth Annual Conference YUCOMAT 2017, Herceg Novi, September 4-8, 2017. 2017;:70-70.
https://hdl.handle.net/21.15107/rcub_dais_15444 .

Obradović, Nina, Đorđević, Nataša, Kosanović, Darko, Filipović, Suzana, Kachlik, Martin, Maca, Karel, Olćan, Dragan, Đorđević, Antonije, Pavlović, Vladimir B., "Characterization of pressure-less sintered MgO-Al2O3-SiO2-TeO2 system" in Programme and The Book of Abstracts / Nineteenth Annual Conference YUCOMAT 2017, Herceg Novi, September 4-8, 2017 (2017):70-70,
https://hdl.handle.net/21.15107/rcub_dais_15444 .

TY  - CONF
AU  - Olćan, Dragan
AU  - Obradović, Nina
AU  - Filipović, Suzana
AU  - Terzić, Anja
AU  - Pavlović, Vladimir B.
AU  - Kachlik, Martin
AU  - Maca, Karel
AU  - Đorđević, Antonije
PY  - 2017
UR  - http://dais.sanu.ac.rs/123456789/4824
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5738
AB  - We present an overview of electromagnetic numerical techniques and measurement apparatus that have been used for assessing electrical properties of ceramic samples. The complex permittivity of the ceramics is typically the first electromagnetic property of interest. In the measurement approach that we use, ceramic samples, in the shape of pills with metalized faces, are placed in either a proprietary coaxial chamber or in an open fixture. The scattering parameter (reflection coefficient) is measured using a network analyzer. For the deembedding of the complex permittivity of a sample one needs precise electromagnetic simulations, including detailed models of the chamber or the open fixture. For lower and intermediate frequencies we use a numerical technique for electrostatic analysis, based on the method of moments with Galerkin testing. We create a database that is used afterwards for evaluation of the complex permittivity practically in real time. For higher frequencies, a full electrodynamic model of the chamber is developed with WIPL-D software. For all our deembedding techniques, we have also developed a detailed model of losses in the SMA coaxial connectors, which is essential for a precise evaluation of the imaginary part of the complex permittivity for low-loss dielectrics. We present results of several measurements in order to illustrate the used techniques.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VI: New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, September 18-20, 2017
T1  - Assessing electrical properties of ceramic samples
EP  - 52
SP  - 51
UR  - https://hdl.handle.net/21.15107/rcub_dais_4824
ER  - 

@conference{
author = "Olćan, Dragan and Obradović, Nina and Filipović, Suzana and Terzić, Anja and Pavlović, Vladimir B. and Kachlik, Martin and Maca, Karel and Đorđević, Antonije",
year = "2017",
abstract = "We present an overview of electromagnetic numerical techniques and measurement apparatus that have been used for assessing electrical properties of ceramic samples. The complex permittivity of the ceramics is typically the first electromagnetic property of interest. In the measurement approach that we use, ceramic samples, in the shape of pills with metalized faces, are placed in either a proprietary coaxial chamber or in an open fixture. The scattering parameter (reflection coefficient) is measured using a network analyzer. For the deembedding of the complex permittivity of a sample one needs precise electromagnetic simulations, including detailed models of the chamber or the open fixture. For lower and intermediate frequencies we use a numerical technique for electrostatic analysis, based on the method of moments with Galerkin testing. We create a database that is used afterwards for evaluation of the complex permittivity practically in real time. For higher frequencies, a full electrodynamic model of the chamber is developed with WIPL-D software. For all our deembedding techniques, we have also developed a detailed model of losses in the SMA coaxial connectors, which is essential for a precise evaluation of the imaginary part of the complex permittivity for low-loss dielectrics. We present results of several measurements in order to illustrate the used techniques.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VI: New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, September 18-20, 2017",
title = "Assessing electrical properties of ceramic samples",
pages = "52-51",
url = "https://hdl.handle.net/21.15107/rcub_dais_4824"
}

Olćan, D., Obradović, N., Filipović, S., Terzić, A., Pavlović, V. B., Kachlik, M., Maca, K.,& Đorđević, A.. (2017). Assessing electrical properties of ceramic samples. in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VI: New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, September 18-20, 2017
Belgrade : Serbian Ceramic Society., 51-52.
https://hdl.handle.net/21.15107/rcub_dais_4824

Olćan D, Obradović N, Filipović S, Terzić A, Pavlović VB, Kachlik M, Maca K, Đorđević A. Assessing electrical properties of ceramic samples. in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VI: New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, September 18-20, 2017. 2017;:51-52.
https://hdl.handle.net/21.15107/rcub_dais_4824 .

Olćan, Dragan, Obradović, Nina, Filipović, Suzana, Terzić, Anja, Pavlović, Vladimir B., Kachlik, Martin, Maca, Karel, Đorđević, Antonije, "Assessing electrical properties of ceramic samples" in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VI: New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, September 18-20, 2017 (2017):51-52,
https://hdl.handle.net/21.15107/rcub_dais_4824 .

TY  - JOUR
AU  - Filipović, Suzana
AU  - Obradović, N.
AU  - Pavlović, Vladimir
AU  - Mitrić, M.
AU  - Djordjević, Antonije
AU  - Kachlik, Martin
AU  - Maca, Karel
PY  - 2016
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/4209
AB  - The aim of this study is to explore the influence of the processing route on the structural and physical properties of bulk MgTiO3 ceramics. Commercially available MgO and TiO2 powders were mechanically activated in a planetary ball mill. Green bodies were formed by an isostatic pressure of 300 MPa. The sintering of these samples was done either by the Two-Step Sintering (TSS) approach or by conventional pressureless sintering followed by Hot Isostatic Pressing (post-HIPing). The first set of compacts was sintered by TSS in air at 1300 degrees C for 30 min and the next step was performed at 1200 degrees C for 20 h. The density of the obtained samples after the two-step sintering reached almost 90% of the theoretical density (%TD). The second set of compacts was sintered at 1400 degrees C for 30 min in air. The samples without open porosity were post-sintered by the HIP at 1200 degrees C for 2 h in an argon atmosphere at a pressure of 200 MPa. The density significantly increased up to 96%TD. The differences between samples prepared by these two techniques were also analyzed by XRD and SEM. The lattice vibration spectra were obtained using Raman spectroscopy and they indicate a high degree of lattice disorder, as well as high values of the oxygen vacancy concentration. Electrical characteristic were established in the frequency range from 10 kHz to 10 GHz. The choice of the processing route had considerable influence on structural and physical properties of MgTiO3 ceramics.
PB  - Elsevier Sci Ltd, Oxford
T2  - Ceramics International
T1  - Effect of consolidation parameters on structural, microstructural and electrical properties of magnesium titanate ceramics
EP  - 9898
IS  - 8
SP  - 9887
VL  - 42
DO  - 10.1016/j.ceramint.2016.03.088
ER  - 

@article{
author = "Filipović, Suzana and Obradović, N. and Pavlović, Vladimir and Mitrić, M. and Djordjević, Antonije and Kachlik, Martin and Maca, Karel",
year = "2016",
abstract = "The aim of this study is to explore the influence of the processing route on the structural and physical properties of bulk MgTiO3 ceramics. Commercially available MgO and TiO2 powders were mechanically activated in a planetary ball mill. Green bodies were formed by an isostatic pressure of 300 MPa. The sintering of these samples was done either by the Two-Step Sintering (TSS) approach or by conventional pressureless sintering followed by Hot Isostatic Pressing (post-HIPing). The first set of compacts was sintered by TSS in air at 1300 degrees C for 30 min and the next step was performed at 1200 degrees C for 20 h. The density of the obtained samples after the two-step sintering reached almost 90% of the theoretical density (%TD). The second set of compacts was sintered at 1400 degrees C for 30 min in air. The samples without open porosity were post-sintered by the HIP at 1200 degrees C for 2 h in an argon atmosphere at a pressure of 200 MPa. The density significantly increased up to 96%TD. The differences between samples prepared by these two techniques were also analyzed by XRD and SEM. The lattice vibration spectra were obtained using Raman spectroscopy and they indicate a high degree of lattice disorder, as well as high values of the oxygen vacancy concentration. Electrical characteristic were established in the frequency range from 10 kHz to 10 GHz. The choice of the processing route had considerable influence on structural and physical properties of MgTiO3 ceramics.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Ceramics International",
title = "Effect of consolidation parameters on structural, microstructural and electrical properties of magnesium titanate ceramics",
pages = "9898-9887",
number = "8",
volume = "42",
doi = "10.1016/j.ceramint.2016.03.088"
}

Filipović, S., Obradović, N., Pavlović, V., Mitrić, M., Djordjević, A., Kachlik, M.,& Maca, K.. (2016). Effect of consolidation parameters on structural, microstructural and electrical properties of magnesium titanate ceramics. in Ceramics International
Elsevier Sci Ltd, Oxford., 42(8), 9887-9898.
https://doi.org/10.1016/j.ceramint.2016.03.088

Filipović S, Obradović N, Pavlović V, Mitrić M, Djordjević A, Kachlik M, Maca K. Effect of consolidation parameters on structural, microstructural and electrical properties of magnesium titanate ceramics. in Ceramics International. 2016;42(8):9887-9898.
doi:10.1016/j.ceramint.2016.03.088 .

Filipović, Suzana, Obradović, N., Pavlović, Vladimir, Mitrić, M., Djordjević, Antonije, Kachlik, Martin, Maca, Karel, "Effect of consolidation parameters on structural, microstructural and electrical properties of magnesium titanate ceramics" in Ceramics International, 42, no. 8 (2016):9887-9898,
https://doi.org/10.1016/j.ceramint.2016.03.088 . .

TY  - JOUR
AU  - Obradović, Nina
AU  - Filipović, Suzana
AU  - Djordjević, Nataša
AU  - Kosanović, Darko
AU  - Marković, Smilja
AU  - Pavlović, Vladimir
AU  - Olcan, Dragan
AU  - Djordjević, Antonije
AU  - Kachlik, Martin
AU  - Maca, Karel
PY  - 2016
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/4019
AB  - The mechanical activation can help reduce production costs and modify cordierite-based materials. In this study, the structure and electrical properties of the mechanically activated MgO-Al2O3-SiO2 system have been analyzed. The mixtures of MgO-Al2O3-SiO2 powders were mechanically activated in a planetary ball mill for time periods ranging from 0 to 160 min. Structural investigations were performed on the obtained powders. The effects of activation and a two-step sintering process on the microstructure and crystal structure were investigated by scanning electron microscopy (SEM) and X-ray diffraction (XRD). The thermal stability was analyzed using DTA. Electrical measurements showed variations of the dielectric constant (epsilon(r)) and loss tangent (tan delta) as a function of the time of mechanical treatment.
PB  - Elsevier Sci Ltd, Oxford
T2  - Ceramics International
T1  - Effects of mechanical activation and two-step sintering on the structure and electrical properties of cordierite-based ceramics
EP  - 13918
IS  - 12
SP  - 13909
VL  - 42
DO  - 10.1016/j.ceramint.2016.05.201
ER  - 

@article{
author = "Obradović, Nina and Filipović, Suzana and Djordjević, Nataša and Kosanović, Darko and Marković, Smilja and Pavlović, Vladimir and Olcan, Dragan and Djordjević, Antonije and Kachlik, Martin and Maca, Karel",
year = "2016",
abstract = "The mechanical activation can help reduce production costs and modify cordierite-based materials. In this study, the structure and electrical properties of the mechanically activated MgO-Al2O3-SiO2 system have been analyzed. The mixtures of MgO-Al2O3-SiO2 powders were mechanically activated in a planetary ball mill for time periods ranging from 0 to 160 min. Structural investigations were performed on the obtained powders. The effects of activation and a two-step sintering process on the microstructure and crystal structure were investigated by scanning electron microscopy (SEM) and X-ray diffraction (XRD). The thermal stability was analyzed using DTA. Electrical measurements showed variations of the dielectric constant (epsilon(r)) and loss tangent (tan delta) as a function of the time of mechanical treatment.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Ceramics International",
title = "Effects of mechanical activation and two-step sintering on the structure and electrical properties of cordierite-based ceramics",
pages = "13918-13909",
number = "12",
volume = "42",
doi = "10.1016/j.ceramint.2016.05.201"
}

Obradović, N., Filipović, S., Djordjević, N., Kosanović, D., Marković, S., Pavlović, V., Olcan, D., Djordjević, A., Kachlik, M.,& Maca, K.. (2016). Effects of mechanical activation and two-step sintering on the structure and electrical properties of cordierite-based ceramics. in Ceramics International
Elsevier Sci Ltd, Oxford., 42(12), 13909-13918.
https://doi.org/10.1016/j.ceramint.2016.05.201

Obradović N, Filipović S, Djordjević N, Kosanović D, Marković S, Pavlović V, Olcan D, Djordjević A, Kachlik M, Maca K. Effects of mechanical activation and two-step sintering on the structure and electrical properties of cordierite-based ceramics. in Ceramics International. 2016;42(12):13909-13918.
doi:10.1016/j.ceramint.2016.05.201 .

Obradović, Nina, Filipović, Suzana, Djordjević, Nataša, Kosanović, Darko, Marković, Smilja, Pavlović, Vladimir, Olcan, Dragan, Djordjević, Antonije, Kachlik, Martin, Maca, Karel, "Effects of mechanical activation and two-step sintering on the structure and electrical properties of cordierite-based ceramics" in Ceramics International, 42, no. 12 (2016):13909-13918,
https://doi.org/10.1016/j.ceramint.2016.05.201 . .

TY  - JOUR
AU  - Obradović, Nina
AU  - Filipović, Suzana
AU  - Djordjević, Nataša
AU  - Kosanović, Darko
AU  - Pavlović, Vladimir
AU  - Olcan, Dragan
AU  - Djordjević, Antonije
AU  - Kachlik, Martin
AU  - Maca, Karel
PY  - 2016
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/4026
AB  - Cordierite-based ceramic materials are attracting much interest for their various applications in industry, for manufacturing multilayer circuit boards, catalytic converters, filters, thermal insulation, kiln furniture, components of portable electronic devices, etc. In order to reduce production costs and modify cordierite-based materials, mechanical activation can be used. In this study, microstructural and electrical properties of mechanically activated MgO-Al2O3-SiO2 system have been analyzed. The mixtures of MgO-Al2O3-SiO2 powders were mechanically activated in a planetary ball mill for the time periods from 0 to 160 min. Morphological investigations have been performed on the obtained powders. The effects of activation and two-step sintering process on microstructure were investigated by scanning electron microscopy (SEM). Electrical measurements showed variations of the dielectric constant (epsilon(r)) and loss tangent (tan delta) as a function of time of mechanical treatment.
PB  - Međunarodni Institut za nauku o sinterovanju, Beograd
T2  - Science of Sintering
T1  - Microstructural and Electrical Properties of Cordierite-based Ceramics Obtained After Two-step Sintering Technique
EP  - 165
IS  - 2
SP  - 157
VL  - 48
DO  - 10.2298/SOS1602157O
ER  - 

@article{
author = "Obradović, Nina and Filipović, Suzana and Djordjević, Nataša and Kosanović, Darko and Pavlović, Vladimir and Olcan, Dragan and Djordjević, Antonije and Kachlik, Martin and Maca, Karel",
year = "2016",
abstract = "Cordierite-based ceramic materials are attracting much interest for their various applications in industry, for manufacturing multilayer circuit boards, catalytic converters, filters, thermal insulation, kiln furniture, components of portable electronic devices, etc. In order to reduce production costs and modify cordierite-based materials, mechanical activation can be used. In this study, microstructural and electrical properties of mechanically activated MgO-Al2O3-SiO2 system have been analyzed. The mixtures of MgO-Al2O3-SiO2 powders were mechanically activated in a planetary ball mill for the time periods from 0 to 160 min. Morphological investigations have been performed on the obtained powders. The effects of activation and two-step sintering process on microstructure were investigated by scanning electron microscopy (SEM). Electrical measurements showed variations of the dielectric constant (epsilon(r)) and loss tangent (tan delta) as a function of time of mechanical treatment.",
publisher = "Međunarodni Institut za nauku o sinterovanju, Beograd",
journal = "Science of Sintering",
title = "Microstructural and Electrical Properties of Cordierite-based Ceramics Obtained After Two-step Sintering Technique",
pages = "165-157",
number = "2",
volume = "48",
doi = "10.2298/SOS1602157O"
}

Obradović, N., Filipović, S., Djordjević, N., Kosanović, D., Pavlović, V., Olcan, D., Djordjević, A., Kachlik, M.,& Maca, K.. (2016). Microstructural and Electrical Properties of Cordierite-based Ceramics Obtained After Two-step Sintering Technique. in Science of Sintering
Međunarodni Institut za nauku o sinterovanju, Beograd., 48(2), 157-165.
https://doi.org/10.2298/SOS1602157O

Obradović N, Filipović S, Djordjević N, Kosanović D, Pavlović V, Olcan D, Djordjević A, Kachlik M, Maca K. Microstructural and Electrical Properties of Cordierite-based Ceramics Obtained After Two-step Sintering Technique. in Science of Sintering. 2016;48(2):157-165.
doi:10.2298/SOS1602157O .

Obradović, Nina, Filipović, Suzana, Djordjević, Nataša, Kosanović, Darko, Pavlović, Vladimir, Olcan, Dragan, Djordjević, Antonije, Kachlik, Martin, Maca, Karel, "Microstructural and Electrical Properties of Cordierite-based Ceramics Obtained After Two-step Sintering Technique" in Science of Sintering, 48, no. 2 (2016):157-165,
https://doi.org/10.2298/SOS1602157O . .

TY  - CONF
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Pavlović, Vladimir B.
AU  - Kosanović, Darko
AU  - Mitrić, Miodrag
AU  - Paunović, Vesna
AU  - Pouchly, V.
AU  - Kachlik, Martin
AU  - Maca, Karel
PY  - 2015
UR  - http://dais.sanu.ac.rs/123456789/763
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5709
AB  - Mechanically activated powders (0, 10, 40, 80 and 160 minutes) were formed by isostatic pressure 300 MPa to cylindrical green bodies (φ 12 mm). First set of samples was sintered at 1300°C for 30 min in air (heating rate 10 °C/min, cooling rate 5 oC/min). These samples were re-sintered at 1200 oC for 20 h in air (heating rate 20 °C/min, cooling rate 10 oC/min). Samples reached almost 90 % TD. The second set of samples was sintered at 1400 °C for 30 in air (heating rate 10 oC/min, cooling rate 5 °C/min). Relative densities increased up to 93 % TD. The samples of absence of open porosity (MTO-10, 40, 80 and 160) were post-sintered by pressure assisted technique Hot Isostatic Pressing (HIP) at 1200 °C for 2 h in argon atmosphere with pressure 200 MPa. The samples increased densities up to 96 % TD for sample MT-160. Electrical measurements were performed in the microwave field of frequency.
PB  - Belgrade : Serbian Ceramic Society
C3  - Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / IV Serbian Ceramic Society Conference, Belgrade, 21-23. September 2015
T1  - The effect of Hot Isostatic Pressing on the MT sample densities
EP  - 55
SP  - 55
UR  - https://hdl.handle.net/21.15107/rcub_dais_763
ER  - 

@conference{
author = "Filipović, Suzana and Obradović, Nina and Pavlović, Vladimir B. and Kosanović, Darko and Mitrić, Miodrag and Paunović, Vesna and Pouchly, V. and Kachlik, Martin and Maca, Karel",
year = "2015",
abstract = "Mechanically activated powders (0, 10, 40, 80 and 160 minutes) were formed by isostatic pressure 300 MPa to cylindrical green bodies (φ 12 mm). First set of samples was sintered at 1300°C for 30 min in air (heating rate 10 °C/min, cooling rate 5 oC/min). These samples were re-sintered at 1200 oC for 20 h in air (heating rate 20 °C/min, cooling rate 10 oC/min). Samples reached almost 90 % TD. The second set of samples was sintered at 1400 °C for 30 in air (heating rate 10 oC/min, cooling rate 5 °C/min). Relative densities increased up to 93 % TD. The samples of absence of open porosity (MTO-10, 40, 80 and 160) were post-sintered by pressure assisted technique Hot Isostatic Pressing (HIP) at 1200 °C for 2 h in argon atmosphere with pressure 200 MPa. The samples increased densities up to 96 % TD for sample MT-160. Electrical measurements were performed in the microwave field of frequency.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / IV Serbian Ceramic Society Conference, Belgrade, 21-23. September 2015",
title = "The effect of Hot Isostatic Pressing on the MT sample densities",
pages = "55-55",
url = "https://hdl.handle.net/21.15107/rcub_dais_763"
}

Filipović, S., Obradović, N., Pavlović, V. B., Kosanović, D., Mitrić, M., Paunović, V., Pouchly, V., Kachlik, M.,& Maca, K.. (2015). The effect of Hot Isostatic Pressing on the MT sample densities. in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / IV Serbian Ceramic Society Conference, Belgrade, 21-23. September 2015
Belgrade : Serbian Ceramic Society., 55-55.
https://hdl.handle.net/21.15107/rcub_dais_763

Filipović S, Obradović N, Pavlović VB, Kosanović D, Mitrić M, Paunović V, Pouchly V, Kachlik M, Maca K. The effect of Hot Isostatic Pressing on the MT sample densities. in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / IV Serbian Ceramic Society Conference, Belgrade, 21-23. September 2015. 2015;:55-55.
https://hdl.handle.net/21.15107/rcub_dais_763 .

Filipović, Suzana, Obradović, Nina, Pavlović, Vladimir B., Kosanović, Darko, Mitrić, Miodrag, Paunović, Vesna, Pouchly, V., Kachlik, Martin, Maca, Karel, "The effect of Hot Isostatic Pressing on the MT sample densities" in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts / IV Serbian Ceramic Society Conference, Belgrade, 21-23. September 2015 (2015):55-55,
https://hdl.handle.net/21.15107/rcub_dais_763 .

TY  - JOUR
AU  - Filipović, Suzana
AU  - Obradović, N.
AU  - Pavlović, Vladimir
AU  - Kosanović, Darko
AU  - Mitrić, M.
AU  - Mitrović, N.
AU  - Pouchly, V.
AU  - Kachlik, Martin
AU  - Maca, Karel
PY  - 2014
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/3438
AB  - In this article, the advantages of combined sintering in comparison with the conventional one, of mechanically activated magnesium titanate ceramic were investigated. The stoichiometric mixtures of MgO and TiO2 were mechano-chemically activated for 0, 10, 40, 80 and 160 minutes by ball milling and then isostatically pressed (CIP) to form green bodies. Conventional sintering was realized by heating up to 1400 degrees C and hold for 30 minutes in air atmosphere. Resulting ceramic samples with closed porosity were post-sintered by pressure assisted technique Hot Isostatic Pressing (HIP) at 1280 degrees C/3h in argon atmosphere with a pressure of 200 MPa. The best results were observed in the case of samples post-sintered by HIP, when single-phase MgTiO3 samples with relative density of 96% were prepared.
PB  - Međunarodni Institut za nauku o sinterovanju, Beograd
T2  - Science of Sintering
T1  - Advantages of Combined Sintering Compared to Conventional Sintering of Mechanically Activated Magnesium Titanate
EP  - 290
IS  - 3
SP  - 283
VL  - 46
DO  - 10.2298/SOS1403283F
ER  - 

@article{
author = "Filipović, Suzana and Obradović, N. and Pavlović, Vladimir and Kosanović, Darko and Mitrić, M. and Mitrović, N. and Pouchly, V. and Kachlik, Martin and Maca, Karel",
year = "2014",
abstract = "In this article, the advantages of combined sintering in comparison with the conventional one, of mechanically activated magnesium titanate ceramic were investigated. The stoichiometric mixtures of MgO and TiO2 were mechano-chemically activated for 0, 10, 40, 80 and 160 minutes by ball milling and then isostatically pressed (CIP) to form green bodies. Conventional sintering was realized by heating up to 1400 degrees C and hold for 30 minutes in air atmosphere. Resulting ceramic samples with closed porosity were post-sintered by pressure assisted technique Hot Isostatic Pressing (HIP) at 1280 degrees C/3h in argon atmosphere with a pressure of 200 MPa. The best results were observed in the case of samples post-sintered by HIP, when single-phase MgTiO3 samples with relative density of 96% were prepared.",
publisher = "Međunarodni Institut za nauku o sinterovanju, Beograd",
journal = "Science of Sintering",
title = "Advantages of Combined Sintering Compared to Conventional Sintering of Mechanically Activated Magnesium Titanate",
pages = "290-283",
number = "3",
volume = "46",
doi = "10.2298/SOS1403283F"
}

Filipović, S., Obradović, N., Pavlović, V., Kosanović, D., Mitrić, M., Mitrović, N., Pouchly, V., Kachlik, M.,& Maca, K.. (2014). Advantages of Combined Sintering Compared to Conventional Sintering of Mechanically Activated Magnesium Titanate. in Science of Sintering
Međunarodni Institut za nauku o sinterovanju, Beograd., 46(3), 283-290.
https://doi.org/10.2298/SOS1403283F

Filipović S, Obradović N, Pavlović V, Kosanović D, Mitrić M, Mitrović N, Pouchly V, Kachlik M, Maca K. Advantages of Combined Sintering Compared to Conventional Sintering of Mechanically Activated Magnesium Titanate. in Science of Sintering. 2014;46(3):283-290.
doi:10.2298/SOS1403283F .

Filipović, Suzana, Obradović, N., Pavlović, Vladimir, Kosanović, Darko, Mitrić, M., Mitrović, N., Pouchly, V., Kachlik, Martin, Maca, Karel, "Advantages of Combined Sintering Compared to Conventional Sintering of Mechanically Activated Magnesium Titanate" in Science of Sintering, 46, no. 3 (2014):283-290,
https://doi.org/10.2298/SOS1403283F . .