TY  - DATA
AU  - Rusmirović, Jelena
AU  - Obradović, Nina
AU  - Perendija, Jovana
AU  - Umićević, Ana
AU  - Kapidžić, Ana
AU  - Vlahović, Branislav
AU  - Pavlović, Vera P.
AU  - Marinković, Aleksandar D.
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/5805
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5741
PB  - Springer
T2  - Environmental Science and Pollution Research
T1  - Supplementary material for the article: Rusmirović, J.D., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V., Marinković, A.D., Pavlović, V.B., 2019. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. Environ Sci Pollut Res 26, 12379–12398. https://doi.org/10.1007/s11356-019-04625-0
UR  - https://hdl.handle.net/21.15107/rcub_dais_5805
ER  - 

@misc{
author = "Rusmirović, Jelena and Obradović, Nina and Perendija, Jovana and Umićević, Ana and Kapidžić, Ana and Vlahović, Branislav and Pavlović, Vera P. and Marinković, Aleksandar D. and Pavlović, Vladimir B.",
year = "2019",
publisher = "Springer",
journal = "Environmental Science and Pollution Research",
title = "Supplementary material for the article: Rusmirović, J.D., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V., Marinković, A.D., Pavlović, V.B., 2019. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. Environ Sci Pollut Res 26, 12379–12398. https://doi.org/10.1007/s11356-019-04625-0",
url = "https://hdl.handle.net/21.15107/rcub_dais_5805"
}

Rusmirović, J., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V. P., Marinković, A. D.,& Pavlović, V. B.. (2019). Supplementary material for the article: Rusmirović, J.D., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V., Marinković, A.D., Pavlović, V.B., 2019. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. Environ Sci Pollut Res 26, 12379–12398. https://doi.org/10.1007/s11356-019-04625-0. in Environmental Science and Pollution Research
Springer..
https://hdl.handle.net/21.15107/rcub_dais_5805

Rusmirović J, Obradović N, Perendija J, Umićević A, Kapidžić A, Vlahović B, Pavlović VP, Marinković AD, Pavlović VB. Supplementary material for the article: Rusmirović, J.D., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V., Marinković, A.D., Pavlović, V.B., 2019. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. Environ Sci Pollut Res 26, 12379–12398. https://doi.org/10.1007/s11356-019-04625-0. in Environmental Science and Pollution Research. 2019;.
https://hdl.handle.net/21.15107/rcub_dais_5805 .

Rusmirović, Jelena, Obradović, Nina, Perendija, Jovana, Umićević, Ana, Kapidžić, Ana, Vlahović, Branislav, Pavlović, Vera P., Marinković, Aleksandar D., Pavlović, Vladimir B., "Supplementary material for the article: Rusmirović, J.D., Obradović, N., Perendija, J., Umićević, A., Kapidžić, A., Vlahović, B., Pavlović, V., Marinković, A.D., Pavlović, V.B., 2019. Controllable synthesis of Fe3O4-wollastonite adsorbents for efficient heavy metal ions/oxyanions removal. Environ Sci Pollut Res 26, 12379–12398. https://doi.org/10.1007/s11356-019-04625-0" in Environmental Science and Pollution Research (2019),
https://hdl.handle.net/21.15107/rcub_dais_5805 .

TY  - JOUR
AU  - Obradović, Nina
AU  - Fahrenholtz, William G.
AU  - Filipović, Suzana
AU  - Kosanović, Darko
AU  - Dapčević, A.
AU  - Đorđević, Antonije
AU  - Balać, Igor
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://www.sciencedirect.com/science/article/pii/S0272884219306340
UR  - http://dais.sanu.ac.rs/123456789/5272
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5740
AB  - Magnesium aluminate, MgAl2O4 and other alumina-based spinels are ceramics with high hardness, high melting point and mechanical strenght. Spinels can also be used as dielectrics in microwave applications. The goal of this study was to examine the effects of mechanical activation and sintering temperatures on physico-chemical properties of spinel. MgAl2O4 was produced by solid state reaction between MgO and α-Al2O3. The starting powders were mixed by ball milling to homogenize without significant particle size reduction. Mechanical activation of mixed powders was performed in a high-energy planetary ball mill in air for 1 h. Powders were compacted at 300 MPa. Heat treatments were performed in air, at temperatures ranging from 1200 to 1600 °C with 2 h dwell time, to determine the amount of spinel formation as a function of temperature. Phase composition and microstructure of initial powders and heated samples were determined by means of X-ray diffraction, particle size analysis, and scanning electron microscopy. The influences of milling and consolidation parameters were studied by electrical measurements and mechanical characterization. The main conclusion of this study was that mechanical activation for 60 min initiated a mechano-chemical reaction, resulted in spinel formation at much lower temperatures than within non-activated powders, and indicated that final sintering stage started at much lower temperatures for activated powders. Changes in microstructure parameters, as a consequence of mechanical treatment and subsequent heating of investigated powder mixtures, strongly affect electrical and mechanical properties of the final ceramics.
PB  - Elsevier
T2  - Ceramics International
T1  - The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics
EP  - 12021
IS  - 9
SP  - 12015
VL  - 45
DO  - 10.1016/j.ceramint.2019.03.095
ER  - 

@article{
author = "Obradović, Nina and Fahrenholtz, William G. and Filipović, Suzana and Kosanović, Darko and Dapčević, A. and Đorđević, Antonije and Balać, Igor and Pavlović, Vladimir B.",
year = "2019",
abstract = "Magnesium aluminate, MgAl2O4 and other alumina-based spinels are ceramics with high hardness, high melting point and mechanical strenght. Spinels can also be used as dielectrics in microwave applications. The goal of this study was to examine the effects of mechanical activation and sintering temperatures on physico-chemical properties of spinel. MgAl2O4 was produced by solid state reaction between MgO and α-Al2O3. The starting powders were mixed by ball milling to homogenize without significant particle size reduction. Mechanical activation of mixed powders was performed in a high-energy planetary ball mill in air for 1 h. Powders were compacted at 300 MPa. Heat treatments were performed in air, at temperatures ranging from 1200 to 1600 °C with 2 h dwell time, to determine the amount of spinel formation as a function of temperature. Phase composition and microstructure of initial powders and heated samples were determined by means of X-ray diffraction, particle size analysis, and scanning electron microscopy. The influences of milling and consolidation parameters were studied by electrical measurements and mechanical characterization. The main conclusion of this study was that mechanical activation for 60 min initiated a mechano-chemical reaction, resulted in spinel formation at much lower temperatures than within non-activated powders, and indicated that final sintering stage started at much lower temperatures for activated powders. Changes in microstructure parameters, as a consequence of mechanical treatment and subsequent heating of investigated powder mixtures, strongly affect electrical and mechanical properties of the final ceramics.",
publisher = "Elsevier",
journal = "Ceramics International",
title = "The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics",
pages = "12021-12015",
number = "9",
volume = "45",
doi = "10.1016/j.ceramint.2019.03.095"
}

Obradović, N., Fahrenholtz, W. G., Filipović, S., Kosanović, D., Dapčević, A., Đorđević, A., Balać, I.,& Pavlović, V. B.. (2019). The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics. in Ceramics International
Elsevier., 45(9), 12015-12021.
https://doi.org/10.1016/j.ceramint.2019.03.095

Obradović N, Fahrenholtz WG, Filipović S, Kosanović D, Dapčević A, Đorđević A, Balać I, Pavlović VB. The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics. in Ceramics International. 2019;45(9):12015-12021.
doi:10.1016/j.ceramint.2019.03.095 .

Obradović, Nina, Fahrenholtz, William G., Filipović, Suzana, Kosanović, Darko, Dapčević, A., Đorđević, Antonije, Balać, Igor, Pavlović, Vladimir B., "The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics" in Ceramics International, 45, no. 9 (2019):12015-12021,
https://doi.org/10.1016/j.ceramint.2019.03.095 . .

TY  - JOUR
AU  - Obradović, Nina
AU  - Blagojević, Vladimir A.
AU  - Filipović, Suzana
AU  - Đorđević, Nataša
AU  - Kosanović, Darko
AU  - Marković, Smilja
AU  - Kachlik, Martin
AU  - Maca, Karel
AU  - Pavlović, Vladimir B.
PY  - 2019
UR  - http://dais.sanu.ac.rs/123456789/4558
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5733
AB  - Thermally activated processes in cordierite-based ceramics were investigated to determine the effect of the mechanical activation and the addition of TeO2 on kinetic and thermodynamic parameters of these processes. Using a combination of dilatometry and DTA measurements in the 100–1400 °C temperature range, it was established that both the mechanical activation and the addition of TeO2 have a significant effect on processes in cordierite-based ceramics. A combination of 5 mass% addition of TeO2 and mechanical activation for 40 min reduced the sintering temperature of cordierite ceramics to around 1100 °C. In addition, the analysis of DTA measurements of mechanically activated samples indicates that the mechanical activation leads to intensification of the cordierite formation through an increase in concentration of surface defects and an increase in grain contact surface in the initial powder.
PB  - Springer
T2  - Journal of Thermal Analysis and Calorimetry
T1  - Kinetics of thermally activated processes in cordierite-based ceramics
EP  - 2998
SP  - 2989
VL  - 138
DO  - 10.1007/s10973-018-7924-1
ER  - 

@article{
author = "Obradović, Nina and Blagojević, Vladimir A. and Filipović, Suzana and Đorđević, Nataša and Kosanović, Darko and Marković, Smilja and Kachlik, Martin and Maca, Karel and Pavlović, Vladimir B.",
year = "2019",
abstract = "Thermally activated processes in cordierite-based ceramics were investigated to determine the effect of the mechanical activation and the addition of TeO2 on kinetic and thermodynamic parameters of these processes. Using a combination of dilatometry and DTA measurements in the 100–1400 °C temperature range, it was established that both the mechanical activation and the addition of TeO2 have a significant effect on processes in cordierite-based ceramics. A combination of 5 mass% addition of TeO2 and mechanical activation for 40 min reduced the sintering temperature of cordierite ceramics to around 1100 °C. In addition, the analysis of DTA measurements of mechanically activated samples indicates that the mechanical activation leads to intensification of the cordierite formation through an increase in concentration of surface defects and an increase in grain contact surface in the initial powder.",
publisher = "Springer",
journal = "Journal of Thermal Analysis and Calorimetry",
title = "Kinetics of thermally activated processes in cordierite-based ceramics",
pages = "2998-2989",
volume = "138",
doi = "10.1007/s10973-018-7924-1"
}

Obradović, N., Blagojević, V. A., Filipović, S., Đorđević, N., Kosanović, D., Marković, S., Kachlik, M., Maca, K.,& Pavlović, V. B.. (2019). Kinetics of thermally activated processes in cordierite-based ceramics. in Journal of Thermal Analysis and Calorimetry
Springer., 138, 2989-2998.
https://doi.org/10.1007/s10973-018-7924-1

Obradović N, Blagojević VA, Filipović S, Đorđević N, Kosanović D, Marković S, Kachlik M, Maca K, Pavlović VB. Kinetics of thermally activated processes in cordierite-based ceramics. in Journal of Thermal Analysis and Calorimetry. 2019;138:2989-2998.
doi:10.1007/s10973-018-7924-1 .

Obradović, Nina, Blagojević, Vladimir A., Filipović, Suzana, Đorđević, Nataša, Kosanović, Darko, Marković, Smilja, Kachlik, Martin, Maca, Karel, Pavlović, Vladimir B., "Kinetics of thermally activated processes in cordierite-based ceramics" in Journal of Thermal Analysis and Calorimetry, 138 (2019):2989-2998,
https://doi.org/10.1007/s10973-018-7924-1 . .

TY  - DATA
AU  - Rusmirović, Jelena
AU  - Rančić, Milica P.
AU  - Pavlović, Vladimir B.
AU  - Rakić, Vesna M.
AU  - Stevanović, Sanja
AU  - Đonlagić, Jasna
AU  - Marinković, Aleksandar D.
PY  - 2018
UR  - http://dais.sanu.ac.rs/123456789/3757
UR  - https://onlinelibrary.wiley.com/action/downloadSupplement?doi=10.1002%2Fmame.201700648&file=mame201700648-sup-0001-S1.pdf
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5727
AB  - Cellulose Nanocrystals (NC) Isolation; Isolation of FAs and Preparation of Methyl Esters of FAs; Chemical Modification of NC with FAs and Methyl Esters of FAs; Curing Kinetics Analysis using Raman Spectroscopy; Transmission Electron Microscopy (TEM) Analysis of Nanocomposite Materials; Mechanical Testing of UPe/m-NC Nanocomposite Materials; Dynamic-Mechanical Analysis of Nanocomposite Materials;
T2  - Macromolecular Materials and Engineering
T1  - Supporting Information for Macromol. Mater. Eng., DOI: 10.1002/mame.201700648: Cross-Linkable Modified Nanocellulose/Polyester Resin-Based Composites: Effect of Unsaturated Fatty Acid Nanocellulose Modification on Material Performances
IS  - 8
VL  - 303
UR  - https://hdl.handle.net/21.15107/rcub_dais_3757
ER  - 

@misc{
author = "Rusmirović, Jelena and Rančić, Milica P. and Pavlović, Vladimir B. and Rakić, Vesna M. and Stevanović, Sanja and Đonlagić, Jasna and Marinković, Aleksandar D.",
year = "2018",
abstract = "Cellulose Nanocrystals (NC) Isolation; Isolation of FAs and Preparation of Methyl Esters of FAs; Chemical Modification of NC with FAs and Methyl Esters of FAs; Curing Kinetics Analysis using Raman Spectroscopy; Transmission Electron Microscopy (TEM) Analysis of Nanocomposite Materials; Mechanical Testing of UPe/m-NC Nanocomposite Materials; Dynamic-Mechanical Analysis of Nanocomposite Materials;",
journal = "Macromolecular Materials and Engineering",
title = "Supporting Information for Macromol. Mater. Eng., DOI: 10.1002/mame.201700648: Cross-Linkable Modified Nanocellulose/Polyester Resin-Based Composites: Effect of Unsaturated Fatty Acid Nanocellulose Modification on Material Performances",
number = "8",
volume = "303",
url = "https://hdl.handle.net/21.15107/rcub_dais_3757"
}

Rusmirović, J., Rančić, M. P., Pavlović, V. B., Rakić, V. M., Stevanović, S., Đonlagić, J.,& Marinković, A. D.. (2018). Supporting Information for Macromol. Mater. Eng., DOI: 10.1002/mame.201700648: Cross-Linkable Modified Nanocellulose/Polyester Resin-Based Composites: Effect of Unsaturated Fatty Acid Nanocellulose Modification on Material Performances. in Macromolecular Materials and Engineering, 303(8).
https://hdl.handle.net/21.15107/rcub_dais_3757

Rusmirović J, Rančić MP, Pavlović VB, Rakić VM, Stevanović S, Đonlagić J, Marinković AD. Supporting Information for Macromol. Mater. Eng., DOI: 10.1002/mame.201700648: Cross-Linkable Modified Nanocellulose/Polyester Resin-Based Composites: Effect of Unsaturated Fatty Acid Nanocellulose Modification on Material Performances. in Macromolecular Materials and Engineering. 2018;303(8).
https://hdl.handle.net/21.15107/rcub_dais_3757 .

Rusmirović, Jelena, Rančić, Milica P., Pavlović, Vladimir B., Rakić, Vesna M., Stevanović, Sanja, Đonlagić, Jasna, Marinković, Aleksandar D., "Supporting Information for Macromol. Mater. Eng., DOI: 10.1002/mame.201700648: Cross-Linkable Modified Nanocellulose/Polyester Resin-Based Composites: Effect of Unsaturated Fatty Acid Nanocellulose Modification on Material Performances" in Macromolecular Materials and Engineering, 303, no. 8 (2018),
https://hdl.handle.net/21.15107/rcub_dais_3757 .

TY  - CONF
AU  - Obradović, Nina
AU  - Gigov, Mihajlo
AU  - Đorđević, Aleksandar
AU  - Kern, Frank
AU  - Dmitrović, Svetlana
AU  - Matović, Branko
AU  - Đorđević, Antonije
AU  - Pavlović, Vladimir B.
PY  - 2018
UR  - http://dais.sanu.ac.rs/123456789/3667
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5726
AB  - The paper presents results of investigation of the influence of mechanical activation of shungite, a Russian natural mineral rich in silica and carbon, on its sintering behavior. The mechanical activation of the starting powder was performed in a high-energy ball mill in time intervals from 0 to 480 minutes. The phase composition of the starting mixtures and sintered samples was analyzed by the X-ray diffraction method. The scanning electron microscopy was performed in order to determine changes in the microstructure. Sintering was performed at various temperatures for 2 h, in an Ar and vacuum atmosphere. Dielectric properties of the sintered samples were measured in the frequency range from 1 to 500 MHz. The obtained results indicate that sintered shungite powder is a good candidate for applications as an absorber of electromagnetic waves in microwave engineering.
PB  - Belgrade : Materials Research Society of Serbia
C3  - Programme and The Book of Abstracts / Twentieth Annual Conference YUCOMAT 2018, Herceg Novi, September 3-7, 2018
T1  - Shungite - a Russian mineral: possible application as a microwave absorber
EP  - 94
SP  - 94
UR  - https://hdl.handle.net/21.15107/rcub_dais_3667
ER  - 

@conference{
author = "Obradović, Nina and Gigov, Mihajlo and Đorđević, Aleksandar and Kern, Frank and Dmitrović, Svetlana and Matović, Branko and Đorđević, Antonije and Pavlović, Vladimir B.",
year = "2018",
abstract = "The paper presents results of investigation of the influence of mechanical activation of shungite, a Russian natural mineral rich in silica and carbon, on its sintering behavior. The mechanical activation of the starting powder was performed in a high-energy ball mill in time intervals from 0 to 480 minutes. The phase composition of the starting mixtures and sintered samples was analyzed by the X-ray diffraction method. The scanning electron microscopy was performed in order to determine changes in the microstructure. Sintering was performed at various temperatures for 2 h, in an Ar and vacuum atmosphere. Dielectric properties of the sintered samples were measured in the frequency range from 1 to 500 MHz. The obtained results indicate that sintered shungite powder is a good candidate for applications as an absorber of electromagnetic waves in microwave engineering.",
publisher = "Belgrade : Materials Research Society of Serbia",
journal = "Programme and The Book of Abstracts / Twentieth Annual Conference YUCOMAT 2018, Herceg Novi, September 3-7, 2018",
title = "Shungite - a Russian mineral: possible application as a microwave absorber",
pages = "94-94",
url = "https://hdl.handle.net/21.15107/rcub_dais_3667"
}

Obradović, N., Gigov, M., Đorđević, A., Kern, F., Dmitrović, S., Matović, B., Đorđević, A.,& Pavlović, V. B.. (2018). Shungite - a Russian mineral: possible application as a microwave absorber. in Programme and The Book of Abstracts / Twentieth Annual Conference YUCOMAT 2018, Herceg Novi, September 3-7, 2018
Belgrade : Materials Research Society of Serbia., 94-94.
https://hdl.handle.net/21.15107/rcub_dais_3667

Obradović N, Gigov M, Đorđević A, Kern F, Dmitrović S, Matović B, Đorđević A, Pavlović VB. Shungite - a Russian mineral: possible application as a microwave absorber. in Programme and The Book of Abstracts / Twentieth Annual Conference YUCOMAT 2018, Herceg Novi, September 3-7, 2018. 2018;:94-94.
https://hdl.handle.net/21.15107/rcub_dais_3667 .

Obradović, Nina, Gigov, Mihajlo, Đorđević, Aleksandar, Kern, Frank, Dmitrović, Svetlana, Matović, Branko, Đorđević, Antonije, Pavlović, Vladimir B., "Shungite - a Russian mineral: possible application as a microwave absorber" in Programme and The Book of Abstracts / Twentieth Annual Conference YUCOMAT 2018, Herceg Novi, September 3-7, 2018 (2018):94-94,
https://hdl.handle.net/21.15107/rcub_dais_3667 .

TY  - DATA
AU  - Đorđević, Aleksandar
AU  - Šojić Merkulov, Daniela
AU  - Lazarević, Marina
AU  - Borišev, Ivana
AU  - Medić, Igor
AU  - Pavlović, Vladimir B.
AU  - Miljević, Bojan
AU  - Abramović, Biljana
PY  - 2018
UR  - https://ars.els-cdn.com/content/image/1-s2.0-S0045653517321380-mmc1.doc
UR  - http://dais.sanu.ac.rs/123456789/3787
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5728
AB  - Chemicals, solutions and catalysts; Nanoparticles characterization; Synthesis of THF-nC60, FNP, TiO2/THF-nC60 and TiO2/FNP nanoparticles; Characterization of THF-nC60, FNP, TiO2, TiO2/THF-nC60, and TiO2/FNP nanoparticles; Evaluation of mineralization;
T2  - Chemosphere
T1  - Supplementary material: Djordjevic, A., Šojić Merkulov, D., Lazarević, M., Borišev, I., Medić, I., Pavlović, V., Miljević, B., Abramović, B., 2018. Enhancement of nano titanium dioxide coatings by fullerene and polyhydroxy fullerene in the photocatalytic degradation of the herbicide mesotrione. Chemosphere 196, 145–152. https://doi.org/10.1016/j.chemosphere.2017.12.160
VL  - 196
UR  - https://hdl.handle.net/21.15107/rcub_dais_3787
ER  - 

@misc{
author = "Đorđević, Aleksandar and Šojić Merkulov, Daniela and Lazarević, Marina and Borišev, Ivana and Medić, Igor and Pavlović, Vladimir B. and Miljević, Bojan and Abramović, Biljana",
year = "2018",
abstract = "Chemicals, solutions and catalysts; Nanoparticles characterization; Synthesis of THF-nC60, FNP, TiO2/THF-nC60 and TiO2/FNP nanoparticles; Characterization of THF-nC60, FNP, TiO2, TiO2/THF-nC60, and TiO2/FNP nanoparticles; Evaluation of mineralization;",
journal = "Chemosphere",
title = "Supplementary material: Djordjevic, A., Šojić Merkulov, D., Lazarević, M., Borišev, I., Medić, I., Pavlović, V., Miljević, B., Abramović, B., 2018. Enhancement of nano titanium dioxide coatings by fullerene and polyhydroxy fullerene in the photocatalytic degradation of the herbicide mesotrione. Chemosphere 196, 145–152. https://doi.org/10.1016/j.chemosphere.2017.12.160",
volume = "196",
url = "https://hdl.handle.net/21.15107/rcub_dais_3787"
}

Đorđević, A., Šojić Merkulov, D., Lazarević, M., Borišev, I., Medić, I., Pavlović, V. B., Miljević, B.,& Abramović, B.. (2018). Supplementary material: Djordjevic, A., Šojić Merkulov, D., Lazarević, M., Borišev, I., Medić, I., Pavlović, V., Miljević, B., Abramović, B., 2018. Enhancement of nano titanium dioxide coatings by fullerene and polyhydroxy fullerene in the photocatalytic degradation of the herbicide mesotrione. Chemosphere 196, 145–152. https://doi.org/10.1016/j.chemosphere.2017.12.160. in Chemosphere, 196.
https://hdl.handle.net/21.15107/rcub_dais_3787

Đorđević A, Šojić Merkulov D, Lazarević M, Borišev I, Medić I, Pavlović VB, Miljević B, Abramović B. Supplementary material: Djordjevic, A., Šojić Merkulov, D., Lazarević, M., Borišev, I., Medić, I., Pavlović, V., Miljević, B., Abramović, B., 2018. Enhancement of nano titanium dioxide coatings by fullerene and polyhydroxy fullerene in the photocatalytic degradation of the herbicide mesotrione. Chemosphere 196, 145–152. https://doi.org/10.1016/j.chemosphere.2017.12.160. in Chemosphere. 2018;196.
https://hdl.handle.net/21.15107/rcub_dais_3787 .

Đorđević, Aleksandar, Šojić Merkulov, Daniela, Lazarević, Marina, Borišev, Ivana, Medić, Igor, Pavlović, Vladimir B., Miljević, Bojan, Abramović, Biljana, "Supplementary material: Djordjevic, A., Šojić Merkulov, D., Lazarević, M., Borišev, I., Medić, I., Pavlović, V., Miljević, B., Abramović, B., 2018. Enhancement of nano titanium dioxide coatings by fullerene and polyhydroxy fullerene in the photocatalytic degradation of the herbicide mesotrione. Chemosphere 196, 145–152. https://doi.org/10.1016/j.chemosphere.2017.12.160" in Chemosphere, 196 (2018),
https://hdl.handle.net/21.15107/rcub_dais_3787 .

TY  - CONF
AU  - Ivanović, Marija
AU  - Kljajević, Ljiljana M.
AU  - Gulicovski, Jelena
AU  - Todorović, Bratislav Ž.
AU  - Egelja, Adela
AU  - Pavlović, Vladimir B.
AU  - Nenadović, Snežana S.
PY  - 2018
UR  - http://dais.sanu.ac.rs/123456789/3630
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5724
AB  - The goal of this research was to produce an environmental friendly, energy saving inorganic polymer using a metakaolin as a precursor. The clean technology which conserve the natural environment was employed for the production of these materials. The used kaolinite is clay obtained from Rudovci, Lazarevac, Serbia. Physicochemical properties of kaolin were investigated in previous work by Nenadović et al. [1]. Metakaolin (MK) was prepared by calcining kaolinite at 750 °C for 1 h. The influence of alkali activation, i.e. different concentration of NaOH as a component of alkali activator mixture on the process of polymerization of metakaolin is investigated. The alkaline solution was prepared from sodium silicate and 2M, 4M, 6M and 8 M NaOH (analytical grade) (volume ratio Na2SiO3/NaOH = 1.6). The inorganic polymer (IP) samples were formed from metakaolin and the four different alkaline solution (solid/liquid ratio was about 1), which were mixed for 15 min and then left at room temperature for one day. Finally, the mixture was kept in a sample drying oven for 2 days at 60 °C. Process of aging time of inorganic polymer samples at 7th, 14th, 21st and 28th days is followed by some analytical methods (XRD, FTIR). X-ray diffraction (XRD) and Fourier transformation infrared spectroscopy (FTIR) were used for characterization of metakaolin and metakaolin based inorganic polymers. After 28th days when the aging time were finished, on the surface of the samples were used scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS). XRD analysis almost of all inorganic polymer samples revealed their amorphouslike structure with the position of an amorphous halo in the range 18°-32°, which indicates short range ordering of the reference sample with crystalline admixture of SiO2 (α-quartz, ICSD 89). The FTIR spectra of all samples shows a strong peak at ∼1000 cm−1 which is associated with Si–O–Si asymmetric stretching vibrations and is the finger print of the geopolymerization [2,3]. The FT-IR results show a shift of the Si-O or Si-O-X bands as the molarity of activator increasing during polymerization process, where X can be Si or Al. Both methods and XRD, as well as FTIR, show greater sensitivity to monitoring the effects of molarity, than the aging time within the same molarity to structural changes in inorganic polymer. SEM micrographs (Fig.1) showed a denser matrix, and a lower content of unreacted metakaolin particles due to increasing of molarity of NaOH. Structural reorganization of inorganic polymer samples occurs during the curing or aging in accordance with a polymerization mechanism.
PB  - Belgrade : Serbian Academy of Sciences and Arts
C3  - Program and Book of Abstracts / First International Conference on Electron Microscopy of Nanostructures ELMINA 2018, August 27-29, 2018, Belgrade, Serbia
T1  - The Effect of Alkaline Activator Molarity and Aging Time on the Structure of Inorganic Polymer
EP  - 206
SP  - 204
UR  - https://hdl.handle.net/21.15107/rcub_dais_3630
ER  - 

@conference{
author = "Ivanović, Marija and Kljajević, Ljiljana M. and Gulicovski, Jelena and Todorović, Bratislav Ž. and Egelja, Adela and Pavlović, Vladimir B. and Nenadović, Snežana S.",
year = "2018",
abstract = "The goal of this research was to produce an environmental friendly, energy saving inorganic polymer using a metakaolin as a precursor. The clean technology which conserve the natural environment was employed for the production of these materials. The used kaolinite is clay obtained from Rudovci, Lazarevac, Serbia. Physicochemical properties of kaolin were investigated in previous work by Nenadović et al. [1]. Metakaolin (MK) was prepared by calcining kaolinite at 750 °C for 1 h. The influence of alkali activation, i.e. different concentration of NaOH as a component of alkali activator mixture on the process of polymerization of metakaolin is investigated. The alkaline solution was prepared from sodium silicate and 2M, 4M, 6M and 8 M NaOH (analytical grade) (volume ratio Na2SiO3/NaOH = 1.6). The inorganic polymer (IP) samples were formed from metakaolin and the four different alkaline solution (solid/liquid ratio was about 1), which were mixed for 15 min and then left at room temperature for one day. Finally, the mixture was kept in a sample drying oven for 2 days at 60 °C. Process of aging time of inorganic polymer samples at 7th, 14th, 21st and 28th days is followed by some analytical methods (XRD, FTIR). X-ray diffraction (XRD) and Fourier transformation infrared spectroscopy (FTIR) were used for characterization of metakaolin and metakaolin based inorganic polymers. After 28th days when the aging time were finished, on the surface of the samples were used scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS). XRD analysis almost of all inorganic polymer samples revealed their amorphouslike structure with the position of an amorphous halo in the range 18°-32°, which indicates short range ordering of the reference sample with crystalline admixture of SiO2 (α-quartz, ICSD 89). The FTIR spectra of all samples shows a strong peak at ∼1000 cm−1 which is associated with Si–O–Si asymmetric stretching vibrations and is the finger print of the geopolymerization [2,3]. The FT-IR results show a shift of the Si-O or Si-O-X bands as the molarity of activator increasing during polymerization process, where X can be Si or Al. Both methods and XRD, as well as FTIR, show greater sensitivity to monitoring the effects of molarity, than the aging time within the same molarity to structural changes in inorganic polymer. SEM micrographs (Fig.1) showed a denser matrix, and a lower content of unreacted metakaolin particles due to increasing of molarity of NaOH. Structural reorganization of inorganic polymer samples occurs during the curing or aging in accordance with a polymerization mechanism.",
publisher = "Belgrade : Serbian Academy of Sciences and Arts",
journal = "Program and Book of Abstracts / First International Conference on Electron Microscopy of Nanostructures ELMINA 2018, August 27-29, 2018, Belgrade, Serbia",
title = "The Effect of Alkaline Activator Molarity and Aging Time on the Structure of Inorganic Polymer",
pages = "206-204",
url = "https://hdl.handle.net/21.15107/rcub_dais_3630"
}

Ivanović, M., Kljajević, L. M., Gulicovski, J., Todorović, B. Ž., Egelja, A., Pavlović, V. B.,& Nenadović, S. S.. (2018). The Effect of Alkaline Activator Molarity and Aging Time on the Structure of Inorganic Polymer. in Program and Book of Abstracts / First International Conference on Electron Microscopy of Nanostructures ELMINA 2018, August 27-29, 2018, Belgrade, Serbia
Belgrade : Serbian Academy of Sciences and Arts., 204-206.
https://hdl.handle.net/21.15107/rcub_dais_3630

Ivanović M, Kljajević LM, Gulicovski J, Todorović BŽ, Egelja A, Pavlović VB, Nenadović SS. The Effect of Alkaline Activator Molarity and Aging Time on the Structure of Inorganic Polymer. in Program and Book of Abstracts / First International Conference on Electron Microscopy of Nanostructures ELMINA 2018, August 27-29, 2018, Belgrade, Serbia. 2018;:204-206.
https://hdl.handle.net/21.15107/rcub_dais_3630 .

Ivanović, Marija, Kljajević, Ljiljana M., Gulicovski, Jelena, Todorović, Bratislav Ž., Egelja, Adela, Pavlović, Vladimir B., Nenadović, Snežana S., "The Effect of Alkaline Activator Molarity and Aging Time on the Structure of Inorganic Polymer" in Program and Book of Abstracts / First International Conference on Electron Microscopy of Nanostructures ELMINA 2018, August 27-29, 2018, Belgrade, Serbia (2018):204-206,
https://hdl.handle.net/21.15107/rcub_dais_3630 .

TY  - DATA
AU  - Kosanović, Darko
AU  - Blagojević, Vladimir A.
AU  - Maričić, Aleksa
AU  - Aleksić, S.
AU  - Pavlović, Vera P.
AU  - Pavlović, Vladimir B.
AU  - Vlahović, Branislav
PY  - 2018
UR  - https://ars.els-cdn.com/content/image/1-s2.0-S0272884218300919-mmc1.pdf
UR  - http://dais.sanu.ac.rs/123456789/3788
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5729
AB  - Rietveld analysis of XRD patterns of mechanically activated Fe:BaTiO3 powder mixtures sintered at 1200°C
T2  - Ceramics International
T1  - Kosanović, D., Blagojević, V.A., Maričić, A., Aleksić, S., Pavlović, V.P., Pavlović, V.B., Vlahović, B., 2018. Influence of mechanical activation on functional properties of barium hexaferrite ceramics. Ceramics International 44, 6666–6672. https://doi.org/10.1016/j.ceramint.2018.01.078: Supplement
IS  - 6
VL  - 44
UR  - https://hdl.handle.net/21.15107/rcub_dais_4606
ER  - 

@misc{
author = "Kosanović, Darko and Blagojević, Vladimir A. and Maričić, Aleksa and Aleksić, S. and Pavlović, Vera P. and Pavlović, Vladimir B. and Vlahović, Branislav",
year = "2018",
abstract = "Rietveld analysis of XRD patterns of mechanically activated Fe:BaTiO3 powder mixtures sintered at 1200°C",
journal = "Ceramics International",
title = "Kosanović, D., Blagojević, V.A., Maričić, A., Aleksić, S., Pavlović, V.P., Pavlović, V.B., Vlahović, B., 2018. Influence of mechanical activation on functional properties of barium hexaferrite ceramics. Ceramics International 44, 6666–6672. https://doi.org/10.1016/j.ceramint.2018.01.078: Supplement",
number = "6",
volume = "44",
url = "https://hdl.handle.net/21.15107/rcub_dais_4606"
}

Kosanović, D., Blagojević, V. A., Maričić, A., Aleksić, S., Pavlović, V. P., Pavlović, V. B.,& Vlahović, B.. (2018). Kosanović, D., Blagojević, V.A., Maričić, A., Aleksić, S., Pavlović, V.P., Pavlović, V.B., Vlahović, B., 2018. Influence of mechanical activation on functional properties of barium hexaferrite ceramics. Ceramics International 44, 6666–6672. https://doi.org/10.1016/j.ceramint.2018.01.078: Supplement. in Ceramics International, 44(6).
https://hdl.handle.net/21.15107/rcub_dais_4606

Kosanović D, Blagojević VA, Maričić A, Aleksić S, Pavlović VP, Pavlović VB, Vlahović B. Kosanović, D., Blagojević, V.A., Maričić, A., Aleksić, S., Pavlović, V.P., Pavlović, V.B., Vlahović, B., 2018. Influence of mechanical activation on functional properties of barium hexaferrite ceramics. Ceramics International 44, 6666–6672. https://doi.org/10.1016/j.ceramint.2018.01.078: Supplement. in Ceramics International. 2018;44(6).
https://hdl.handle.net/21.15107/rcub_dais_4606 .

Kosanović, Darko, Blagojević, Vladimir A., Maričić, Aleksa, Aleksić, S., Pavlović, Vera P., Pavlović, Vladimir B., Vlahović, Branislav, "Kosanović, D., Blagojević, V.A., Maričić, A., Aleksić, S., Pavlović, V.P., Pavlović, V.B., Vlahović, B., 2018. Influence of mechanical activation on functional properties of barium hexaferrite ceramics. Ceramics International 44, 6666–6672. https://doi.org/10.1016/j.ceramint.2018.01.078: Supplement" in Ceramics International, 44, no. 6 (2018),
https://hdl.handle.net/21.15107/rcub_dais_4606 .

TY  - CONF
AU  - Ivanović, Marija
AU  - Mladenović, Nataša
AU  - Gulicovski, Jelena
AU  - Pavlović, Vladimir B.
AU  - Pavlović, Vera P.
AU  - Kljajević, Ljiljana M.
AU  - Nenadović, Snežana S.
PY  - 2018
UR  - http://dais.sanu.ac.rs/123456789/4116
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5732
AB  - Considering geopolymers as inorganic polymers, they are actually amorphous network of interlinked silicate and aluminate groups, so they could be prospective ceramic precursors for materials with defined dimensions obtained by casting and firing, but not from powder processing. In this research, the starting material is metakaolin, which was obtained by calcining domes tic kaolinite clay. Initially, four series of alkaline activators of NaOH and sodium silicate have been used. Activators present the mixtures of Na2SiO3 and solutions of NaOH, of different molarities 2M, 4M, 6M and 8M. The prepared geopolymer slurries were cast into the designated near shape at room temperature and after that at 60oC. In fact, the post-synthesis curing process (28 days) has an important role in the obtaining good characteristics of geopolymers. Densities, viscosities and refractive index of alkaline activators were determined over the temperature range 15-60oC of process of geopolymerizations. Based on the obtained results of investigated parameters have been selected to predict the properties of materials. All geopolymer samples were characterized by XRD, FTIR, SEM/EDS analysis and Raman spectroscopy providing complementary and valuable information of the investigated materials. This route of ceramics production has advantages associated with producing an environmental friendly, energy saving, clean new technology of geopolymer materials.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018
T1  - Effect of Alkaline Activator Properties on Structure of Metakaolin-Based Geopolymer Samples
EP  - 74
SP  - 73
UR  - https://hdl.handle.net/21.15107/rcub_dais_4116
ER  - 

@conference{
author = "Ivanović, Marija and Mladenović, Nataša and Gulicovski, Jelena and Pavlović, Vladimir B. and Pavlović, Vera P. and Kljajević, Ljiljana M. and Nenadović, Snežana S.",
year = "2018",
abstract = "Considering geopolymers as inorganic polymers, they are actually amorphous network of interlinked silicate and aluminate groups, so they could be prospective ceramic precursors for materials with defined dimensions obtained by casting and firing, but not from powder processing. In this research, the starting material is metakaolin, which was obtained by calcining domes tic kaolinite clay. Initially, four series of alkaline activators of NaOH and sodium silicate have been used. Activators present the mixtures of Na2SiO3 and solutions of NaOH, of different molarities 2M, 4M, 6M and 8M. The prepared geopolymer slurries were cast into the designated near shape at room temperature and after that at 60oC. In fact, the post-synthesis curing process (28 days) has an important role in the obtaining good characteristics of geopolymers. Densities, viscosities and refractive index of alkaline activators were determined over the temperature range 15-60oC of process of geopolymerizations. Based on the obtained results of investigated parameters have been selected to predict the properties of materials. All geopolymer samples were characterized by XRD, FTIR, SEM/EDS analysis and Raman spectroscopy providing complementary and valuable information of the investigated materials. This route of ceramics production has advantages associated with producing an environmental friendly, energy saving, clean new technology of geopolymer materials.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018",
title = "Effect of Alkaline Activator Properties on Structure of Metakaolin-Based Geopolymer Samples",
pages = "74-73",
url = "https://hdl.handle.net/21.15107/rcub_dais_4116"
}

Ivanović, M., Mladenović, N., Gulicovski, J., Pavlović, V. B., Pavlović, V. P., Kljajević, L. M.,& Nenadović, S. S.. (2018). Effect of Alkaline Activator Properties on Structure of Metakaolin-Based Geopolymer Samples. in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018
Belgrade : Serbian Ceramic Society., 73-74.
https://hdl.handle.net/21.15107/rcub_dais_4116

Ivanović M, Mladenović N, Gulicovski J, Pavlović VB, Pavlović VP, Kljajević LM, Nenadović SS. Effect of Alkaline Activator Properties on Structure of Metakaolin-Based Geopolymer Samples. in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018. 2018;:73-74.
https://hdl.handle.net/21.15107/rcub_dais_4116 .

Ivanović, Marija, Mladenović, Nataša, Gulicovski, Jelena, Pavlović, Vladimir B., Pavlović, Vera P., Kljajević, Ljiljana M., Nenadović, Snežana S., "Effect of Alkaline Activator Properties on Structure of Metakaolin-Based Geopolymer Samples" in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018 (2018):73-74,
https://hdl.handle.net/21.15107/rcub_dais_4116 .

TY  - CONF
AU  - Vujančević, Jelena
AU  - Bjelajac, Anđelika
AU  - Ćirković, Jovana
AU  - Pavlović, Vera P.
AU  - Horváth, Endre
AU  - Forró, László
AU  - Janaćković, Đorđe
AU  - Pavlović, Vladimir B.
PY  - 2018
UR  - http://dais.sanu.ac.rs/123456789/4722
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5735
AB  - Semiconductor TiO2 photocatalysis is a heterogeneous catalysis, where the photons of the sun or artificial light source are activating the catalyst that enters in reactions. The targeted real-world applications are in environmental protection and remediation such as wastewater treatment, air purification and decomposition of harmful organic pollutants. In this talk, I present the synthesis of nanotubular, thin TiO2 coatings with altered morphology and crystallinity made by anodization technique. The influence of the anodization parameters and post-synthesis annealing conditions on the photocatalytic methyl orange dye decomposition was assessed. Different morphology, crystallinity and introducing a dopant into lattice increase electron transport and electron lifetime which further improve photocatalytic activity.
PB  - Belgrade : Institute of Technical Sciences of SASA
C3  - Program and the Book of Abstracts / Seventeenth Young Researchers' Conference Materials Sciences and Engineering, December 5-7, 2018, Belgrade, Serbia
T1  - Customizing nanotubular titania for photocatalytic activity
EP  - 77
SP  - 77
UR  - https://hdl.handle.net/21.15107/rcub_dais_4722
ER  - 

@conference{
author = "Vujančević, Jelena and Bjelajac, Anđelika and Ćirković, Jovana and Pavlović, Vera P. and Horváth, Endre and Forró, László and Janaćković, Đorđe and Pavlović, Vladimir B.",
year = "2018",
abstract = "Semiconductor TiO2 photocatalysis is a heterogeneous catalysis, where the photons of the sun or artificial light source are activating the catalyst that enters in reactions. The targeted real-world applications are in environmental protection and remediation such as wastewater treatment, air purification and decomposition of harmful organic pollutants. In this talk, I present the synthesis of nanotubular, thin TiO2 coatings with altered morphology and crystallinity made by anodization technique. The influence of the anodization parameters and post-synthesis annealing conditions on the photocatalytic methyl orange dye decomposition was assessed. Different morphology, crystallinity and introducing a dopant into lattice increase electron transport and electron lifetime which further improve photocatalytic activity.",
publisher = "Belgrade : Institute of Technical Sciences of SASA",
journal = "Program and the Book of Abstracts / Seventeenth Young Researchers' Conference Materials Sciences and Engineering, December 5-7, 2018, Belgrade, Serbia",
title = "Customizing nanotubular titania for photocatalytic activity",
pages = "77-77",
url = "https://hdl.handle.net/21.15107/rcub_dais_4722"
}

Vujančević, J., Bjelajac, A., Ćirković, J., Pavlović, V. P., Horváth, E., Forró, L., Janaćković, Đ.,& Pavlović, V. B.. (2018). Customizing nanotubular titania for photocatalytic activity. in Program and the Book of Abstracts / Seventeenth Young Researchers' Conference Materials Sciences and Engineering, December 5-7, 2018, Belgrade, Serbia
Belgrade : Institute of Technical Sciences of SASA., 77-77.
https://hdl.handle.net/21.15107/rcub_dais_4722

Vujančević J, Bjelajac A, Ćirković J, Pavlović VP, Horváth E, Forró L, Janaćković Đ, Pavlović VB. Customizing nanotubular titania for photocatalytic activity. in Program and the Book of Abstracts / Seventeenth Young Researchers' Conference Materials Sciences and Engineering, December 5-7, 2018, Belgrade, Serbia. 2018;:77-77.
https://hdl.handle.net/21.15107/rcub_dais_4722 .

Vujančević, Jelena, Bjelajac, Anđelika, Ćirković, Jovana, Pavlović, Vera P., Horváth, Endre, Forró, László, Janaćković, Đorđe, Pavlović, Vladimir B., "Customizing nanotubular titania for photocatalytic activity" in Program and the Book of Abstracts / Seventeenth Young Researchers' Conference Materials Sciences and Engineering, December 5-7, 2018, Belgrade, Serbia (2018):77-77,
https://hdl.handle.net/21.15107/rcub_dais_4722 .

TY  - CONF
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Marković, Smilja
AU  - Đorđević, Antonije
AU  - Dapčević, Aleksandra
AU  - Rogan, Jelena
AU  - Pavlović, Vladimir B.
PY  - 2018
UR  - http://dais.sanu.ac.rs/123456789/3634
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5725
AB  - Sintered alumina powder represents suitable material for usage in various industry fields (e.g., as chip carriers in electronics, microwaves, jewelry production), due to convenient physical properties, such as sinterability, electrical and mechanical features. Those properties can be modified by addition of different oxides and/or mechanical treatment. Therefore, in this investigation the alumina was doped with 1 wt. % of Cr2O3, Mn2O3 and NiO, respectively, followed by 1 hour of mechanical activation at 400 rpm in planetary ball mill. Sintering of powder mixtures was tracked by sensitive dilatometer up to 1400 °C. The final density values varied from cca. 2 ̶ 3.2 g/cm3. Changes in microstructure were observed by means of SEM. The influence of additives along with mechanical activation is monitored trough changes in electrical permittivity and loss tangent. Compared to pure alumina, the additives lower the relative permittivity and increase dielectric losses. For a given mixture, the sintering increases the relative permittivity and decreases losses.
PB  - Belgrade : Materials Research Society of Serbia
C3  - Programme and The Book of Abstracts / Twentieth Annual Conference YUCOMAT 2018, Herceg Novi, September 3-7, 2018
T1  - Sintering of alumina doped with different oxides, followed by sensitive dilatometer
EP  - 95
SP  - 95
UR  - https://hdl.handle.net/21.15107/rcub_dais_3634
ER  - 

@conference{
author = "Filipović, Suzana and Obradović, Nina and Marković, Smilja and Đorđević, Antonije and Dapčević, Aleksandra and Rogan, Jelena and Pavlović, Vladimir B.",
year = "2018",
abstract = "Sintered alumina powder represents suitable material for usage in various industry fields (e.g., as chip carriers in electronics, microwaves, jewelry production), due to convenient physical properties, such as sinterability, electrical and mechanical features. Those properties can be modified by addition of different oxides and/or mechanical treatment. Therefore, in this investigation the alumina was doped with 1 wt. % of Cr2O3, Mn2O3 and NiO, respectively, followed by 1 hour of mechanical activation at 400 rpm in planetary ball mill. Sintering of powder mixtures was tracked by sensitive dilatometer up to 1400 °C. The final density values varied from cca. 2 ̶ 3.2 g/cm3. Changes in microstructure were observed by means of SEM. The influence of additives along with mechanical activation is monitored trough changes in electrical permittivity and loss tangent. Compared to pure alumina, the additives lower the relative permittivity and increase dielectric losses. For a given mixture, the sintering increases the relative permittivity and decreases losses.",
publisher = "Belgrade : Materials Research Society of Serbia",
journal = "Programme and The Book of Abstracts / Twentieth Annual Conference YUCOMAT 2018, Herceg Novi, September 3-7, 2018",
title = "Sintering of alumina doped with different oxides, followed by sensitive dilatometer",
pages = "95-95",
url = "https://hdl.handle.net/21.15107/rcub_dais_3634"
}

Filipović, S., Obradović, N., Marković, S., Đorđević, A., Dapčević, A., Rogan, J.,& Pavlović, V. B.. (2018). Sintering of alumina doped with different oxides, followed by sensitive dilatometer. in Programme and The Book of Abstracts / Twentieth Annual Conference YUCOMAT 2018, Herceg Novi, September 3-7, 2018
Belgrade : Materials Research Society of Serbia., 95-95.
https://hdl.handle.net/21.15107/rcub_dais_3634

Filipović S, Obradović N, Marković S, Đorđević A, Dapčević A, Rogan J, Pavlović VB. Sintering of alumina doped with different oxides, followed by sensitive dilatometer. in Programme and The Book of Abstracts / Twentieth Annual Conference YUCOMAT 2018, Herceg Novi, September 3-7, 2018. 2018;:95-95.
https://hdl.handle.net/21.15107/rcub_dais_3634 .

Filipović, Suzana, Obradović, Nina, Marković, Smilja, Đorđević, Antonije, Dapčević, Aleksandra, Rogan, Jelena, Pavlović, Vladimir B., "Sintering of alumina doped with different oxides, followed by sensitive dilatometer" in Programme and The Book of Abstracts / Twentieth Annual Conference YUCOMAT 2018, Herceg Novi, September 3-7, 2018 (2018):95-95,
https://hdl.handle.net/21.15107/rcub_dais_3634 .

TY  - CONF
AU  - Filipović, Suzana
AU  - Obradović, Nina
AU  - Marković, Smilja
AU  - Mitrić, Miodrag
AU  - Đorđević, Antonije
AU  - Dapčević, Aleksandra
AU  - Rogan, Jelena
AU  - Pavlović, Vladimir B.
PY  - 2018
UR  - http://dais.sanu.ac.rs/123456789/4114
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5731
AB  - Recently, with the huge use of smart gadgets, developing of smart jewelry represents a very interesting segment in material science, as well as in electronic science. Alumina is widely used ceramic in many industrial fields as pigments, catalysis, microelectronics, etc., mostly because of its low cost and appropriate mechanical and electrical properties, high surface area and thermal stability. Also, modified alumina could be applied in production of smart jewelry. Thus, the main objectives of this investigation is to improve features of sintered alumina doped with Mn2O3 along with mechanical treatment, in order to obtain strong ceramic with low values of dielectric loss and low relative dielectric permittivity, as well as esthetic. Commercial alumina powder was doped with 1 wt % of manganese oxide and treated in planetary ball mill for an hour. Characteristic temperatures of both powders (non-activated and activated one) were investigated in detail by DTA and TG analyses. After sintering at 1200, 1300, and 1400 oC for 2 h, XRD patterns and SEM images were recorded. Furthermore, mechanical and electrical properties were examined for all sintered samples.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018
T1  - Effects of ball-milling on properties of sintered alumina doped with Mn2O3
EP  - 75
SP  - 75
UR  - https://hdl.handle.net/21.15107/rcub_dais_4114
ER  - 

@conference{
author = "Filipović, Suzana and Obradović, Nina and Marković, Smilja and Mitrić, Miodrag and Đorđević, Antonije and Dapčević, Aleksandra and Rogan, Jelena and Pavlović, Vladimir B.",
year = "2018",
abstract = "Recently, with the huge use of smart gadgets, developing of smart jewelry represents a very interesting segment in material science, as well as in electronic science. Alumina is widely used ceramic in many industrial fields as pigments, catalysis, microelectronics, etc., mostly because of its low cost and appropriate mechanical and electrical properties, high surface area and thermal stability. Also, modified alumina could be applied in production of smart jewelry. Thus, the main objectives of this investigation is to improve features of sintered alumina doped with Mn2O3 along with mechanical treatment, in order to obtain strong ceramic with low values of dielectric loss and low relative dielectric permittivity, as well as esthetic. Commercial alumina powder was doped with 1 wt % of manganese oxide and treated in planetary ball mill for an hour. Characteristic temperatures of both powders (non-activated and activated one) were investigated in detail by DTA and TG analyses. After sintering at 1200, 1300, and 1400 oC for 2 h, XRD patterns and SEM images were recorded. Furthermore, mechanical and electrical properties were examined for all sintered samples.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018",
title = "Effects of ball-milling on properties of sintered alumina doped with Mn2O3",
pages = "75-75",
url = "https://hdl.handle.net/21.15107/rcub_dais_4114"
}

Filipović, S., Obradović, N., Marković, S., Mitrić, M., Đorđević, A., Dapčević, A., Rogan, J.,& Pavlović, V. B.. (2018). Effects of ball-milling on properties of sintered alumina doped with Mn2O3. in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018
Belgrade : Serbian Ceramic Society., 75-75.
https://hdl.handle.net/21.15107/rcub_dais_4114

Filipović S, Obradović N, Marković S, Mitrić M, Đorđević A, Dapčević A, Rogan J, Pavlović VB. Effects of ball-milling on properties of sintered alumina doped with Mn2O3. in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018. 2018;:75-75.
https://hdl.handle.net/21.15107/rcub_dais_4114 .

Filipović, Suzana, Obradović, Nina, Marković, Smilja, Mitrić, Miodrag, Đorđević, Antonije, Dapčević, Aleksandra, Rogan, Jelena, Pavlović, Vladimir B., "Effects of ball-milling on properties of sintered alumina doped with Mn2O3" in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018 (2018):75-75,
https://hdl.handle.net/21.15107/rcub_dais_4114 .

TY  - CONF
AU  - Obradović, Nina
AU  - Rusmirović, Jelena
AU  - Kosanović, Darko
AU  - Đolić, Maja B.
AU  - Popović, Ana L.
AU  - Pavlović, Vladimir B.
AU  - Marinković, Aleksandar D.
PY  - 2018
UR  - http://dais.sanu.ac.rs/123456789/4573
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5734
AB  - This study presents the synthesis of porous cordierite- based ceramics and its surface activation by polyethylenimine/nano-CeO2 for the heavy metal removal. The synthesis was carried out by the addition of following powders: MgO, Al2O3, and SiO2 in 2:2:5 molar ratios, respectively. The oxide(s) mixture was further processed in two sequential stages: i) ball milled in the ethanol for 40 minutes and palletized under the pressure of 3 t/cm2, as a pre-sintering process, and ii) the pallets were further sintered for 2h in the air atmosphere at 1350 oC, under a heating rate of 20 oC/min. The sintered mineral composite was crashed and sieved, and mixed with 20 wt % of nanocellulose, as a pore forming agent. Nanocellulose mixture was pressed into pallets under 5 t/cm2 and sintered at 700 oC, under a heating rate of 5 oC/ min. The obtained synthetic cordierite was further tested as the adsorbent activated by polyethylenimine/ nano-CeO2 for the removal of Ni2+ and Cd2+ -ions. The adsorption isotherms, kinetics models, and thermodynamic parameters were also analyzed, manifesting that the adsorption is a spontaneous and endothermic process. The phase composition of the pristine and activated cordierite was analyzed by the X-ray diffraction method (XRD), Fourier transformation infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). This work has shed light on the mechanism of heavy metals removal from the aquatic medium using the novel hybrid (nano)synthesized material.
PB  - Beograd : Serbian Society of Toxicology
C3  - Book of Abstracts / 10th Congress of Toxicology in Developing Countries (CTDC10) [and] 12th Congress of the Serbian Society of Toxicology (12th SCT), April 18-21, 2018, Belgrade, Serbia
T1  - The Removal of Ni2+ and Cd2+ -ions onto Synthetic Mineral Based Composite Functionalized by Polyethylenimine
EP  - 145
SP  - 144
UR  - https://hdl.handle.net/21.15107/rcub_dais_4573
ER  - 

@conference{
author = "Obradović, Nina and Rusmirović, Jelena and Kosanović, Darko and Đolić, Maja B. and Popović, Ana L. and Pavlović, Vladimir B. and Marinković, Aleksandar D.",
year = "2018",
abstract = "This study presents the synthesis of porous cordierite- based ceramics and its surface activation by polyethylenimine/nano-CeO2 for the heavy metal removal. The synthesis was carried out by the addition of following powders: MgO, Al2O3, and SiO2 in 2:2:5 molar ratios, respectively. The oxide(s) mixture was further processed in two sequential stages: i) ball milled in the ethanol for 40 minutes and palletized under the pressure of 3 t/cm2, as a pre-sintering process, and ii) the pallets were further sintered for 2h in the air atmosphere at 1350 oC, under a heating rate of 20 oC/min. The sintered mineral composite was crashed and sieved, and mixed with 20 wt % of nanocellulose, as a pore forming agent. Nanocellulose mixture was pressed into pallets under 5 t/cm2 and sintered at 700 oC, under a heating rate of 5 oC/ min. The obtained synthetic cordierite was further tested as the adsorbent activated by polyethylenimine/ nano-CeO2 for the removal of Ni2+ and Cd2+ -ions. The adsorption isotherms, kinetics models, and thermodynamic parameters were also analyzed, manifesting that the adsorption is a spontaneous and endothermic process. The phase composition of the pristine and activated cordierite was analyzed by the X-ray diffraction method (XRD), Fourier transformation infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). This work has shed light on the mechanism of heavy metals removal from the aquatic medium using the novel hybrid (nano)synthesized material.",
publisher = "Beograd : Serbian Society of Toxicology",
journal = "Book of Abstracts / 10th Congress of Toxicology in Developing Countries (CTDC10) [and] 12th Congress of the Serbian Society of Toxicology (12th SCT), April 18-21, 2018, Belgrade, Serbia",
title = "The Removal of Ni2+ and Cd2+ -ions onto Synthetic Mineral Based Composite Functionalized by Polyethylenimine",
pages = "145-144",
url = "https://hdl.handle.net/21.15107/rcub_dais_4573"
}

Obradović, N., Rusmirović, J., Kosanović, D., Đolić, M. B., Popović, A. L., Pavlović, V. B.,& Marinković, A. D.. (2018). The Removal of Ni2+ and Cd2+ -ions onto Synthetic Mineral Based Composite Functionalized by Polyethylenimine. in Book of Abstracts / 10th Congress of Toxicology in Developing Countries (CTDC10) [and] 12th Congress of the Serbian Society of Toxicology (12th SCT), April 18-21, 2018, Belgrade, Serbia
Beograd : Serbian Society of Toxicology., 144-145.
https://hdl.handle.net/21.15107/rcub_dais_4573

Obradović N, Rusmirović J, Kosanović D, Đolić MB, Popović AL, Pavlović VB, Marinković AD. The Removal of Ni2+ and Cd2+ -ions onto Synthetic Mineral Based Composite Functionalized by Polyethylenimine. in Book of Abstracts / 10th Congress of Toxicology in Developing Countries (CTDC10) [and] 12th Congress of the Serbian Society of Toxicology (12th SCT), April 18-21, 2018, Belgrade, Serbia. 2018;:144-145.
https://hdl.handle.net/21.15107/rcub_dais_4573 .

Obradović, Nina, Rusmirović, Jelena, Kosanović, Darko, Đolić, Maja B., Popović, Ana L., Pavlović, Vladimir B., Marinković, Aleksandar D., "The Removal of Ni2+ and Cd2+ -ions onto Synthetic Mineral Based Composite Functionalized by Polyethylenimine" in Book of Abstracts / 10th Congress of Toxicology in Developing Countries (CTDC10) [and] 12th Congress of the Serbian Society of Toxicology (12th SCT), April 18-21, 2018, Belgrade, Serbia (2018):144-145,
https://hdl.handle.net/21.15107/rcub_dais_4573 .

TY  - CONF
AU  - Labus, Nebojša
AU  - Marković, Smilja
AU  - Nikolić, Maria Vesna
AU  - Krstić, Jugoslav
AU  - Pavlović, Vladimir B.
PY  - 2018
UR  - http://dais.sanu.ac.rs/123456789/4099
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5730
AB  - During the compaction of the powder mixture of ZnO and Mn2O3 (MnCO3) and Fe2O3 compacts were find fragile for further handling. Poly vinyl alcohol PVA was used as a binder in an unusual 20% PVA content. We made as well 2% PVA with 0.6% Poly ethylene glycol PEG and 20% PVA with 6 % PEG. Binder was wrapped over the powder by suspension forming in the polymer water solution and drying afterwards until all water content evaporates. On the these obtained powders employed characterization techniques were: Fourier transformed Infra red FTIR spectra with ATR attenuated total reflection technique as well as differential thermal analysis DTA on the device with low temperature sensitivity and TEM transmition electron microscopy. All binder concentrations gave compacts with good mechanical properties, that can be handled with ease but with adding, a PEG as plasticizer the operating of the anvil and piston were extremely difficult due to friction.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018
T1  - Polyvinyl alcohol PVA with poly ethylene Glycol PEG added as a binder for the powder compaction
EP  - 83
SP  - 83
UR  - https://hdl.handle.net/21.15107/rcub_dais_4099
ER  - 

@conference{
author = "Labus, Nebojša and Marković, Smilja and Nikolić, Maria Vesna and Krstić, Jugoslav and Pavlović, Vladimir B.",
year = "2018",
abstract = "During the compaction of the powder mixture of ZnO and Mn2O3 (MnCO3) and Fe2O3 compacts were find fragile for further handling. Poly vinyl alcohol PVA was used as a binder in an unusual 20% PVA content. We made as well 2% PVA with 0.6% Poly ethylene glycol PEG and 20% PVA with 6 % PEG. Binder was wrapped over the powder by suspension forming in the polymer water solution and drying afterwards until all water content evaporates. On the these obtained powders employed characterization techniques were: Fourier transformed Infra red FTIR spectra with ATR attenuated total reflection technique as well as differential thermal analysis DTA on the device with low temperature sensitivity and TEM transmition electron microscopy. All binder concentrations gave compacts with good mechanical properties, that can be handled with ease but with adding, a PEG as plasticizer the operating of the anvil and piston were extremely difficult due to friction.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018",
title = "Polyvinyl alcohol PVA with poly ethylene Glycol PEG added as a binder for the powder compaction",
pages = "83-83",
url = "https://hdl.handle.net/21.15107/rcub_dais_4099"
}

Labus, N., Marković, S., Nikolić, M. V., Krstić, J.,& Pavlović, V. B.. (2018). Polyvinyl alcohol PVA with poly ethylene Glycol PEG added as a binder for the powder compaction. in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018
Belgrade : Serbian Ceramic Society., 83-83.
https://hdl.handle.net/21.15107/rcub_dais_4099

Labus N, Marković S, Nikolić MV, Krstić J, Pavlović VB. Polyvinyl alcohol PVA with poly ethylene Glycol PEG added as a binder for the powder compaction. in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018. 2018;:83-83.
https://hdl.handle.net/21.15107/rcub_dais_4099 .

Labus, Nebojša, Marković, Smilja, Nikolić, Maria Vesna, Krstić, Jugoslav, Pavlović, Vladimir B., "Polyvinyl alcohol PVA with poly ethylene Glycol PEG added as a binder for the powder compaction" in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VII : New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, 17-19 September 2018 (2018):83-83,
https://hdl.handle.net/21.15107/rcub_dais_4099 .

TY  - CONF
AU  - Vukčević, Mira
AU  - Bošković, Ivana
AU  - Nenadović, Snežana S.
AU  - Mirković, Miljana M.
AU  - Čalija, Bojan
AU  - Pavlović, Vladimir B.
AU  - Kljajević, Ljiljana M.
PY  - 2017
UR  - http://dais.sanu.ac.rs/123456789/15438
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5721
AB  - There is potential use of red mud for synthesis of inorganic polymeric materials through a geopolymerization process as an alternative in the sectors of construction and building materials. By introducing of inorganic and organic modificators of microstructure (calcium hydroxide, bifunctional epoxy resins, or various types of alkoxylanes) during the geopolymer synthesis the enhanced values of ductility and strength can be obtained. Research was performed on alumosilicate material (red mud and metakaolin) and alkali activator raw mixture with defined quantity of modificator. The best sinthesys conditions were identified. Post-synthesis curing also play important role in obtaining of good-performing geopolymers. Characteristics of geopolymers were defined by measuring of compressive strength, N2-physisorption, as well as by SEM analysis, X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). In addition the lower value of zeta potential was identified as the assisting factor for the specific structure domains formation (within the certain range of pH) accompanied by the high compressive strength.
PB  - Belgrade : Materials Research Society of Serbia
C3  - Programme and The Book of Abstracts / Nineteenth Annual Conference YUCOMAT 2017, Herceg Novi, September 4-8, 2017
T1  - Composition of red mud and/or metakaolin-based modified geopolymers
EP  - 72
SP  - 72
UR  - https://hdl.handle.net/21.15107/rcub_dais_15438
ER  - 

@conference{
author = "Vukčević, Mira and Bošković, Ivana and Nenadović, Snežana S. and Mirković, Miljana M. and Čalija, Bojan and Pavlović, Vladimir B. and Kljajević, Ljiljana M.",
year = "2017",
abstract = "There is potential use of red mud for synthesis of inorganic polymeric materials through a geopolymerization process as an alternative in the sectors of construction and building materials. By introducing of inorganic and organic modificators of microstructure (calcium hydroxide, bifunctional epoxy resins, or various types of alkoxylanes) during the geopolymer synthesis the enhanced values of ductility and strength can be obtained. Research was performed on alumosilicate material (red mud and metakaolin) and alkali activator raw mixture with defined quantity of modificator. The best sinthesys conditions were identified. Post-synthesis curing also play important role in obtaining of good-performing geopolymers. Characteristics of geopolymers were defined by measuring of compressive strength, N2-physisorption, as well as by SEM analysis, X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). In addition the lower value of zeta potential was identified as the assisting factor for the specific structure domains formation (within the certain range of pH) accompanied by the high compressive strength.",
publisher = "Belgrade : Materials Research Society of Serbia",
journal = "Programme and The Book of Abstracts / Nineteenth Annual Conference YUCOMAT 2017, Herceg Novi, September 4-8, 2017",
title = "Composition of red mud and/or metakaolin-based modified geopolymers",
pages = "72-72",
url = "https://hdl.handle.net/21.15107/rcub_dais_15438"
}

Vukčević, M., Bošković, I., Nenadović, S. S., Mirković, M. M., Čalija, B., Pavlović, V. B.,& Kljajević, L. M.. (2017). Composition of red mud and/or metakaolin-based modified geopolymers. in Programme and The Book of Abstracts / Nineteenth Annual Conference YUCOMAT 2017, Herceg Novi, September 4-8, 2017
Belgrade : Materials Research Society of Serbia., 72-72.
https://hdl.handle.net/21.15107/rcub_dais_15438

Vukčević M, Bošković I, Nenadović SS, Mirković MM, Čalija B, Pavlović VB, Kljajević LM. Composition of red mud and/or metakaolin-based modified geopolymers. in Programme and The Book of Abstracts / Nineteenth Annual Conference YUCOMAT 2017, Herceg Novi, September 4-8, 2017. 2017;:72-72.
https://hdl.handle.net/21.15107/rcub_dais_15438 .

Vukčević, Mira, Bošković, Ivana, Nenadović, Snežana S., Mirković, Miljana M., Čalija, Bojan, Pavlović, Vladimir B., Kljajević, Ljiljana M., "Composition of red mud and/or metakaolin-based modified geopolymers" in Programme and The Book of Abstracts / Nineteenth Annual Conference YUCOMAT 2017, Herceg Novi, September 4-8, 2017 (2017):72-72,
https://hdl.handle.net/21.15107/rcub_dais_15438 .

TY  - CONF
AU  - Pavlović, Vladimir B.
AU  - Vulićević, Z.
AU  - Pavlović, Vera P.
PY  - 2017
UR  - http://dais.sanu.ac.rs/123456789/2354
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5722
AB  - Dental ceramics were increasingly introduced to restorative dentistry at the beginning of the XX century as porcelain jacket crowns. However, their limited use in clinical practice was mainly associated to the mechanical shortcomings. In the early sixties porcelain-fused to-metal restorations were developed and for years have represented the “gold standard”, thanks to their good mechanical properties and to somewhat satisfactory esthetics. In the last thirty years, the growing demand for highly esthetic restorations has led to development of new all-ceramic materials and techniques. All-ceramic restorations combine esthetic veneering porcelains (consisting of a glass and a crystalline phase of fluoroapatite, aluminum oxide, or leucite) with strong ceramic cores, mainly made of lithium-disilicate, aluminum-oxide or zirconium-oxide. The most common complication is fracture that can initiate from several different sites on the surface, at interfaces, or within the material. While conventional methods of ceramic fabrication usually contain internal porosity, CAD/CAM technology ensures almost no internal defects. Such improvements in ceramic processing have allowed better structural reliability and greatly contributed to the success of all-ceramic systems. The aim of this study was to provide an overview on development of ceramic systems used in dentistry, their processing, including computer-aided design and computer-aided (CAD/CAM) technology, applications and future perspectives in this field.
PB  - Paris : Atlantis Press
C3  - Proceedings of the IV Advanced Ceramics and Applications Conference
T1  - Contemporary Dental Ceramics
EP  - 119
SP  - 95
DO  - 10.2991/978-94-6239-213-7_9
ER  - 

@conference{
editor = "Lee, Bill, Gadow, Rainer, Mitić, Vojislav V.",
author = "Pavlović, Vladimir B. and Vulićević, Z. and Pavlović, Vera P.",
year = "2017",
abstract = "Dental ceramics were increasingly introduced to restorative dentistry at the beginning of the XX century as porcelain jacket crowns. However, their limited use in clinical practice was mainly associated to the mechanical shortcomings. In the early sixties porcelain-fused to-metal restorations were developed and for years have represented the “gold standard”, thanks to their good mechanical properties and to somewhat satisfactory esthetics. In the last thirty years, the growing demand for highly esthetic restorations has led to development of new all-ceramic materials and techniques. All-ceramic restorations combine esthetic veneering porcelains (consisting of a glass and a crystalline phase of fluoroapatite, aluminum oxide, or leucite) with strong ceramic cores, mainly made of lithium-disilicate, aluminum-oxide or zirconium-oxide. The most common complication is fracture that can initiate from several different sites on the surface, at interfaces, or within the material. While conventional methods of ceramic fabrication usually contain internal porosity, CAD/CAM technology ensures almost no internal defects. Such improvements in ceramic processing have allowed better structural reliability and greatly contributed to the success of all-ceramic systems. The aim of this study was to provide an overview on development of ceramic systems used in dentistry, their processing, including computer-aided design and computer-aided (CAD/CAM) technology, applications and future perspectives in this field.",
publisher = "Paris : Atlantis Press",
journal = "Proceedings of the IV Advanced Ceramics and Applications Conference",
title = "Contemporary Dental Ceramics",
pages = "119-95",
doi = "10.2991/978-94-6239-213-7_9"
}

Lee, B., Gadow, R., Mitić, V. V., Pavlović, V. B., Vulićević, Z.,& Pavlović, V. P.. (2017). Contemporary Dental Ceramics. in Proceedings of the IV Advanced Ceramics and Applications Conference
Paris : Atlantis Press., 95-119.
https://doi.org/10.2991/978-94-6239-213-7_9

Lee B, Gadow R, Mitić VV, Pavlović VB, Vulićević Z, Pavlović VP. Contemporary Dental Ceramics. in Proceedings of the IV Advanced Ceramics and Applications Conference. 2017;:95-119.
doi:10.2991/978-94-6239-213-7_9 .

Lee, Bill, Gadow, Rainer, Mitić, Vojislav V., Pavlović, Vladimir B., Vulićević, Z., Pavlović, Vera P., "Contemporary Dental Ceramics" in Proceedings of the IV Advanced Ceramics and Applications Conference (2017):95-119,
https://doi.org/10.2991/978-94-6239-213-7_9 . .

TY  - CONF
AU  - Vujančević, Jelena
AU  - Bjelajac, Anđelika
AU  - Pavlović, Vera P.
AU  - Vlahović, Branislav
AU  - Janaćković, Đorđe
AU  - Pavlović, Vladimir B.
PY  - 2017
UR  - http://dais.sanu.ac.rs/123456789/5141
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5739
AB  - Nanomaterials development is a rapidly emerging field of research with enormous potential for societal and economic benefits. In agro and food industries dimension-dependent properties or phenomena of nanomaterials may be used for various functional effects such as increased bioavailability or decreased toxicity of products, better detection of pathogens, improved food packaging materials, or improved delivery of nutrients. Since these effects may derive from altered or unique characteristics of materials in the nanoscale range that are not normally observed or expected in larger-scale materials with the same chemical composition, such changes raise questions about the safety, effectiveness, performance, quality or public health impact of nanotechnology products. In this article, we have reviewed the fabrication, properties, and selected applications of nanostructured TiO2 based materials. Special attention has been paid to TiO2 nanoparticles and nanotubes fabrication perspectives and applications in agriculture. We have shown that high photocatalytic disinfection and photobiological effects of nanostructured TiO2 coupled with its low price, nontoxicity, and stable performance especially provide new approaches for solving environmental pollution and pesticide residue problems in agriculture.
PB  - Belgrade : Faculty of Agriculture, Department for Agricultural Engineering
C3  - Book of Abstracts / The Third International Symposium on Agricultural Engineering, ISAE-2017, 20th-21st October 2017, Belgrade - Zemun, Serbia
T1  - Fabrication and applications of multifunctional nanostructured TiO2
EP  - 44
EP  - 
EP  - 
SP  - 44
UR  - https://hdl.handle.net/21.15107/rcub_dais_5141
ER  - 

@conference{
author = "Vujančević, Jelena and Bjelajac, Anđelika and Pavlović, Vera P. and Vlahović, Branislav and Janaćković, Đorđe and Pavlović, Vladimir B.",
year = "2017",
abstract = "Nanomaterials development is a rapidly emerging field of research with enormous potential for societal and economic benefits. In agro and food industries dimension-dependent properties or phenomena of nanomaterials may be used for various functional effects such as increased bioavailability or decreased toxicity of products, better detection of pathogens, improved food packaging materials, or improved delivery of nutrients. Since these effects may derive from altered or unique characteristics of materials in the nanoscale range that are not normally observed or expected in larger-scale materials with the same chemical composition, such changes raise questions about the safety, effectiveness, performance, quality or public health impact of nanotechnology products. In this article, we have reviewed the fabrication, properties, and selected applications of nanostructured TiO2 based materials. Special attention has been paid to TiO2 nanoparticles and nanotubes fabrication perspectives and applications in agriculture. We have shown that high photocatalytic disinfection and photobiological effects of nanostructured TiO2 coupled with its low price, nontoxicity, and stable performance especially provide new approaches for solving environmental pollution and pesticide residue problems in agriculture.",
publisher = "Belgrade : Faculty of Agriculture, Department for Agricultural Engineering",
journal = "Book of Abstracts / The Third International Symposium on Agricultural Engineering, ISAE-2017, 20th-21st October 2017, Belgrade - Zemun, Serbia",
title = "Fabrication and applications of multifunctional nanostructured TiO2",
pages = "44---44",
url = "https://hdl.handle.net/21.15107/rcub_dais_5141"
}

Vujančević, J., Bjelajac, A., Pavlović, V. P., Vlahović, B., Janaćković, Đ.,& Pavlović, V. B.. (2017). Fabrication and applications of multifunctional nanostructured TiO2. in Book of Abstracts / The Third International Symposium on Agricultural Engineering, ISAE-2017, 20th-21st October 2017, Belgrade - Zemun, Serbia
Belgrade : Faculty of Agriculture, Department for Agricultural Engineering., 44-44.
https://hdl.handle.net/21.15107/rcub_dais_5141

Vujančević J, Bjelajac A, Pavlović VP, Vlahović B, Janaćković Đ, Pavlović VB. Fabrication and applications of multifunctional nanostructured TiO2. in Book of Abstracts / The Third International Symposium on Agricultural Engineering, ISAE-2017, 20th-21st October 2017, Belgrade - Zemun, Serbia. 2017;:44-44.
https://hdl.handle.net/21.15107/rcub_dais_5141 .

Vujančević, Jelena, Bjelajac, Anđelika, Pavlović, Vera P., Vlahović, Branislav, Janaćković, Đorđe, Pavlović, Vladimir B., "Fabrication and applications of multifunctional nanostructured TiO2" in Book of Abstracts / The Third International Symposium on Agricultural Engineering, ISAE-2017, 20th-21st October 2017, Belgrade - Zemun, Serbia (2017):44-44,
https://hdl.handle.net/21.15107/rcub_dais_5141 .

TY  - CONF
AU  - Obradović, Nina
AU  - Đorđević, Nataša
AU  - Kosanović, Darko
AU  - Filipović, Suzana
AU  - Kachlik, Martin
AU  - Maca, Karel
AU  - Olćan, Dragan
AU  - Đorđević, Antonije
AU  - Pavlović, Vladimir B.
PY  - 2017
UR  - http://dais.sanu.ac.rs/123456789/15444
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5720
AB  - In this study, sintering of two systems was investigated in parallel, pure cordierite 2MgO:2Al2O3:5SiO2, and cordierite with addition of 5 mass % TeO2. Green bodies were prepared from powder mixtures mechanically activated for 0, 10 and 40minutes by uniaxial pressing at 20 MPa followed by cold isostatic pressing (CIP) at 1000 MPa. The pressure-less sintering of these specimens was performed at a temperature of 1350 oC for 1 h, with 10 oC/min heating rate. Densities over 96 % of theoretical values were obtained for samples activated for 40 minutes. XRD measurements of MAS-40 sintered sample pointed at a mixture that consisted of several phases, majority of cordierite (> 73 %), spinel MgAl2O4 (> 22 %), ZrSiO4 (2.5 %), and Al2O3 (1.8%), while XRD pattern of MAS-40-TeO2 contained majority of cordierite (> 72 %), spinel MgAl2O4 (> 23 %), ZrSiO4 (1.9 %), and Al2O3 (1.9 %). The relative permittivities of the samples were measured in an open test fixture. The results for the real part of the complex relative permittivity of the samples, measured at 200 MHz, are shown in Table I. The loss tangent for all samples was very small, below the resolution of the measurement setup (0.005).
There is a strong correlation between the relative permittivity and the density, which agrees with our previous results.
PB  - Belgrade : Materials Research Society of Serbia
C3  - Programme and The Book of Abstracts / Nineteenth Annual Conference YUCOMAT 2017, Herceg Novi, September 4-8, 2017
T1  - Characterization of pressure-less sintered MgO-Al2O3-SiO2-TeO2 system
EP  - 70
SP  - 70
UR  - https://hdl.handle.net/21.15107/rcub_dais_15444
ER  - 

@conference{
author = "Obradović, Nina and Đorđević, Nataša and Kosanović, Darko and Filipović, Suzana and Kachlik, Martin and Maca, Karel and Olćan, Dragan and Đorđević, Antonije and Pavlović, Vladimir B.",
year = "2017",
abstract = "In this study, sintering of two systems was investigated in parallel, pure cordierite 2MgO:2Al2O3:5SiO2, and cordierite with addition of 5 mass % TeO2. Green bodies were prepared from powder mixtures mechanically activated for 0, 10 and 40minutes by uniaxial pressing at 20 MPa followed by cold isostatic pressing (CIP) at 1000 MPa. The pressure-less sintering of these specimens was performed at a temperature of 1350 oC for 1 h, with 10 oC/min heating rate. Densities over 96 % of theoretical values were obtained for samples activated for 40 minutes. XRD measurements of MAS-40 sintered sample pointed at a mixture that consisted of several phases, majority of cordierite (> 73 %), spinel MgAl2O4 (> 22 %), ZrSiO4 (2.5 %), and Al2O3 (1.8%), while XRD pattern of MAS-40-TeO2 contained majority of cordierite (> 72 %), spinel MgAl2O4 (> 23 %), ZrSiO4 (1.9 %), and Al2O3 (1.9 %). The relative permittivities of the samples were measured in an open test fixture. The results for the real part of the complex relative permittivity of the samples, measured at 200 MHz, are shown in Table I. The loss tangent for all samples was very small, below the resolution of the measurement setup (0.005).
There is a strong correlation between the relative permittivity and the density, which agrees with our previous results.",
publisher = "Belgrade : Materials Research Society of Serbia",
journal = "Programme and The Book of Abstracts / Nineteenth Annual Conference YUCOMAT 2017, Herceg Novi, September 4-8, 2017",
title = "Characterization of pressure-less sintered MgO-Al2O3-SiO2-TeO2 system",
pages = "70-70",
url = "https://hdl.handle.net/21.15107/rcub_dais_15444"
}

Obradović, N., Đorđević, N., Kosanović, D., Filipović, S., Kachlik, M., Maca, K., Olćan, D., Đorđević, A.,& Pavlović, V. B.. (2017). Characterization of pressure-less sintered MgO-Al2O3-SiO2-TeO2 system. in Programme and The Book of Abstracts / Nineteenth Annual Conference YUCOMAT 2017, Herceg Novi, September 4-8, 2017
Belgrade : Materials Research Society of Serbia., 70-70.
https://hdl.handle.net/21.15107/rcub_dais_15444

Obradović N, Đorđević N, Kosanović D, Filipović S, Kachlik M, Maca K, Olćan D, Đorđević A, Pavlović VB. Characterization of pressure-less sintered MgO-Al2O3-SiO2-TeO2 system. in Programme and The Book of Abstracts / Nineteenth Annual Conference YUCOMAT 2017, Herceg Novi, September 4-8, 2017. 2017;:70-70.
https://hdl.handle.net/21.15107/rcub_dais_15444 .

Obradović, Nina, Đorđević, Nataša, Kosanović, Darko, Filipović, Suzana, Kachlik, Martin, Maca, Karel, Olćan, Dragan, Đorđević, Antonije, Pavlović, Vladimir B., "Characterization of pressure-less sintered MgO-Al2O3-SiO2-TeO2 system" in Programme and The Book of Abstracts / Nineteenth Annual Conference YUCOMAT 2017, Herceg Novi, September 4-8, 2017 (2017):70-70,
https://hdl.handle.net/21.15107/rcub_dais_15444 .

TY  - CONF
AU  - Olćan, Dragan
AU  - Obradović, Nina
AU  - Filipović, Suzana
AU  - Terzić, Anja
AU  - Pavlović, Vladimir B.
AU  - Kachlik, Martin
AU  - Maca, Karel
AU  - Đorđević, Antonije
PY  - 2017
UR  - http://dais.sanu.ac.rs/123456789/4824
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5738
AB  - We present an overview of electromagnetic numerical techniques and measurement apparatus that have been used for assessing electrical properties of ceramic samples. The complex permittivity of the ceramics is typically the first electromagnetic property of interest. In the measurement approach that we use, ceramic samples, in the shape of pills with metalized faces, are placed in either a proprietary coaxial chamber or in an open fixture. The scattering parameter (reflection coefficient) is measured using a network analyzer. For the deembedding of the complex permittivity of a sample one needs precise electromagnetic simulations, including detailed models of the chamber or the open fixture. For lower and intermediate frequencies we use a numerical technique for electrostatic analysis, based on the method of moments with Galerkin testing. We create a database that is used afterwards for evaluation of the complex permittivity practically in real time. For higher frequencies, a full electrodynamic model of the chamber is developed with WIPL-D software. For all our deembedding techniques, we have also developed a detailed model of losses in the SMA coaxial connectors, which is essential for a precise evaluation of the imaginary part of the complex permittivity for low-loss dielectrics. We present results of several measurements in order to illustrate the used techniques.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VI: New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, September 18-20, 2017
T1  - Assessing electrical properties of ceramic samples
EP  - 52
SP  - 51
UR  - https://hdl.handle.net/21.15107/rcub_dais_4824
ER  - 

@conference{
author = "Olćan, Dragan and Obradović, Nina and Filipović, Suzana and Terzić, Anja and Pavlović, Vladimir B. and Kachlik, Martin and Maca, Karel and Đorđević, Antonije",
year = "2017",
abstract = "We present an overview of electromagnetic numerical techniques and measurement apparatus that have been used for assessing electrical properties of ceramic samples. The complex permittivity of the ceramics is typically the first electromagnetic property of interest. In the measurement approach that we use, ceramic samples, in the shape of pills with metalized faces, are placed in either a proprietary coaxial chamber or in an open fixture. The scattering parameter (reflection coefficient) is measured using a network analyzer. For the deembedding of the complex permittivity of a sample one needs precise electromagnetic simulations, including detailed models of the chamber or the open fixture. For lower and intermediate frequencies we use a numerical technique for electrostatic analysis, based on the method of moments with Galerkin testing. We create a database that is used afterwards for evaluation of the complex permittivity practically in real time. For higher frequencies, a full electrodynamic model of the chamber is developed with WIPL-D software. For all our deembedding techniques, we have also developed a detailed model of losses in the SMA coaxial connectors, which is essential for a precise evaluation of the imaginary part of the complex permittivity for low-loss dielectrics. We present results of several measurements in order to illustrate the used techniques.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VI: New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, September 18-20, 2017",
title = "Assessing electrical properties of ceramic samples",
pages = "52-51",
url = "https://hdl.handle.net/21.15107/rcub_dais_4824"
}

Olćan, D., Obradović, N., Filipović, S., Terzić, A., Pavlović, V. B., Kachlik, M., Maca, K.,& Đorđević, A.. (2017). Assessing electrical properties of ceramic samples. in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VI: New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, September 18-20, 2017
Belgrade : Serbian Ceramic Society., 51-52.
https://hdl.handle.net/21.15107/rcub_dais_4824

Olćan D, Obradović N, Filipović S, Terzić A, Pavlović VB, Kachlik M, Maca K, Đorđević A. Assessing electrical properties of ceramic samples. in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VI: New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, September 18-20, 2017. 2017;:51-52.
https://hdl.handle.net/21.15107/rcub_dais_4824 .

Olćan, Dragan, Obradović, Nina, Filipović, Suzana, Terzić, Anja, Pavlović, Vladimir B., Kachlik, Martin, Maca, Karel, Đorđević, Antonije, "Assessing electrical properties of ceramic samples" in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VI: New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, September 18-20, 2017 (2017):51-52,
https://hdl.handle.net/21.15107/rcub_dais_4824 .

TY  - CONF
AU  - Obradović, Nina
AU  - Kosanović, Darko
AU  - Filipović, Suzana
AU  - Rusmirović, Jelena
AU  - Marinković, Aleksandar D.
AU  - Radić, Danka
AU  - Pavlović, Vladimir B.
PY  - 2017
UR  - http://dais.sanu.ac.rs/123456789/4776
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5737
AB  - In this study, porous cordierite-based ceramics was synthesized. In the first step, MgO, Al2O3, and SiO2 (all Aldrich, p.a.) were used. MgO and Al2O3 powders were calcined at 1000 oC for 2 h, in order to avoid hydroxides. They were mixed in 2:2:5 molar ratio, in order to form cordierite, Mg2Al4Si5O18. Ethanol was added to the mixture, and then milled in a Fritsch Pulverisette planetary mill, with 300 rpm, in air atmosfere. Times of activation were 0, 10, 40, and 80 min, while balls and vessels were made from ZrO2, and powder to balls mass ratio was 40:1. After milling, powders were dried, and then pressed under 3 t/cm2. Pallets with 8 mm radius were sintered in air at 1350 oC, for 2 h, heating rate was 20 oC/min. Sintered samples were crashed and sieved. In the secons step, the as-prepared cordierite was mixed with 20 wt.% yeast (0.1 g yeast + 0.4 g cordierite per sample). The other mixture was with 20 wt.% nanocellulose (0.1 g NC + 0.4 g cordierite per sample). Both mixtures were pressed into pallets under 5 t/cm2 and sintered at 700 oC, with 5 oC/min heating rate, in air atmosfere. During the second sintering regime, porous cordierite-based ceramics was obtained. The phase composition of the sintered samples as well as microstructures was analyzed by the means of X-ray diffraction method and SEM. Cordierite was the most abundant phase in all sintered samples. It was observed that addition of different pore-forming agent resulted in significantly different microstructures.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VI: New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, September 18-20, 2017
T1  - Preparation of cordierite-based adsorbents for water purification
EP  - 71
SP  - 71
UR  - https://hdl.handle.net/21.15107/rcub_dais_4776
ER  - 

@conference{
author = "Obradović, Nina and Kosanović, Darko and Filipović, Suzana and Rusmirović, Jelena and Marinković, Aleksandar D. and Radić, Danka and Pavlović, Vladimir B.",
year = "2017",
abstract = "In this study, porous cordierite-based ceramics was synthesized. In the first step, MgO, Al2O3, and SiO2 (all Aldrich, p.a.) were used. MgO and Al2O3 powders were calcined at 1000 oC for 2 h, in order to avoid hydroxides. They were mixed in 2:2:5 molar ratio, in order to form cordierite, Mg2Al4Si5O18. Ethanol was added to the mixture, and then milled in a Fritsch Pulverisette planetary mill, with 300 rpm, in air atmosfere. Times of activation were 0, 10, 40, and 80 min, while balls and vessels were made from ZrO2, and powder to balls mass ratio was 40:1. After milling, powders were dried, and then pressed under 3 t/cm2. Pallets with 8 mm radius were sintered in air at 1350 oC, for 2 h, heating rate was 20 oC/min. Sintered samples were crashed and sieved. In the secons step, the as-prepared cordierite was mixed with 20 wt.% yeast (0.1 g yeast + 0.4 g cordierite per sample). The other mixture was with 20 wt.% nanocellulose (0.1 g NC + 0.4 g cordierite per sample). Both mixtures were pressed into pallets under 5 t/cm2 and sintered at 700 oC, with 5 oC/min heating rate, in air atmosfere. During the second sintering regime, porous cordierite-based ceramics was obtained. The phase composition of the sintered samples as well as microstructures was analyzed by the means of X-ray diffraction method and SEM. Cordierite was the most abundant phase in all sintered samples. It was observed that addition of different pore-forming agent resulted in significantly different microstructures.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VI: New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, September 18-20, 2017",
title = "Preparation of cordierite-based adsorbents for water purification",
pages = "71-71",
url = "https://hdl.handle.net/21.15107/rcub_dais_4776"
}

Obradović, N., Kosanović, D., Filipović, S., Rusmirović, J., Marinković, A. D., Radić, D.,& Pavlović, V. B.. (2017). Preparation of cordierite-based adsorbents for water purification. in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VI: New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, September 18-20, 2017
Belgrade : Serbian Ceramic Society., 71-71.
https://hdl.handle.net/21.15107/rcub_dais_4776

Obradović N, Kosanović D, Filipović S, Rusmirović J, Marinković AD, Radić D, Pavlović VB. Preparation of cordierite-based adsorbents for water purification. in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VI: New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, September 18-20, 2017. 2017;:71-71.
https://hdl.handle.net/21.15107/rcub_dais_4776 .

Obradović, Nina, Kosanović, Darko, Filipović, Suzana, Rusmirović, Jelena, Marinković, Aleksandar D., Radić, Danka, Pavlović, Vladimir B., "Preparation of cordierite-based adsorbents for water purification" in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VI: New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, September 18-20, 2017 (2017):71-71,
https://hdl.handle.net/21.15107/rcub_dais_4776 .

TY  - CONF
AU  - Labus, Nebojša
AU  - Pavlović, Vladimir B.
AU  - Vasiljević, Zorka Ž.
AU  - Nikolić, Maria Vesna
PY  - 2017
UR  - http://dais.sanu.ac.rs/123456789/3681
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5723
AB  - Dilatometry is defined as the dimensional change of a solid specimen recorded during temperature schedule. Set of data obtained in such a manner are known as dilatogram. Dilatograms for different sort of materials represent an important trace for deduction of other materials properties than volume. Property parameters directly appointable from the dilatogram graph are: thermal expansion coefficient for the temperature interval, glass transition temperature, phasetransition temperature, sintering shrinkage and sintering temperature for maximal shrinkage rate, crystallization point temperature for amorphous bulk metallic glasses, defect annealing temperature. From dilatometric data we can also calculate more complex values such as the sintering activation energy, deduce sintering kinetic mechanisms, for the phase transition kinetic parameters and phase composition, defect concentration, materials thermal expansion coefficient at a particular temperature, solid state reaction kinetic parameters. Dilatometric devices regarding the construction are divided into contact and non contact ones, for they physically exert force on the specimen or not. Furthermore, contact dilatometric devices can be ascribed due to their construction as vertical and horizontal. This categorization leads to different and changeable contact force on the specimen. Vertical dilatometers usually use higher and temporarily changeable forces applied on the specimen. They can be, with suitable equipment, used for other mechanical properties determination than expansion, such as compressibility, tension or inflection. Non contact devices are divided into interferometric and optical. Interferometric ones use a two laser beams construction where for the length change measuring they count the number of wave lengths that are formed as a path difference between two beams. Optical devices, however, uses monochromatic light projected on the specimen that forms shadow recorded on an optical sensor. Obtained images are then analyzed for the specimen`s dimensional change.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VI: New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, September 18-20, 2017
T1  - Dilatometer as a scientific tool
EP  - 49
SP  - 49
UR  - https://hdl.handle.net/21.15107/rcub_dais_3681
ER  - 

@conference{
author = "Labus, Nebojša and Pavlović, Vladimir B. and Vasiljević, Zorka Ž. and Nikolić, Maria Vesna",
year = "2017",
abstract = "Dilatometry is defined as the dimensional change of a solid specimen recorded during temperature schedule. Set of data obtained in such a manner are known as dilatogram. Dilatograms for different sort of materials represent an important trace for deduction of other materials properties than volume. Property parameters directly appointable from the dilatogram graph are: thermal expansion coefficient for the temperature interval, glass transition temperature, phasetransition temperature, sintering shrinkage and sintering temperature for maximal shrinkage rate, crystallization point temperature for amorphous bulk metallic glasses, defect annealing temperature. From dilatometric data we can also calculate more complex values such as the sintering activation energy, deduce sintering kinetic mechanisms, for the phase transition kinetic parameters and phase composition, defect concentration, materials thermal expansion coefficient at a particular temperature, solid state reaction kinetic parameters. Dilatometric devices regarding the construction are divided into contact and non contact ones, for they physically exert force on the specimen or not. Furthermore, contact dilatometric devices can be ascribed due to their construction as vertical and horizontal. This categorization leads to different and changeable contact force on the specimen. Vertical dilatometers usually use higher and temporarily changeable forces applied on the specimen. They can be, with suitable equipment, used for other mechanical properties determination than expansion, such as compressibility, tension or inflection. Non contact devices are divided into interferometric and optical. Interferometric ones use a two laser beams construction where for the length change measuring they count the number of wave lengths that are formed as a path difference between two beams. Optical devices, however, uses monochromatic light projected on the specimen that forms shadow recorded on an optical sensor. Obtained images are then analyzed for the specimen`s dimensional change.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VI: New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, September 18-20, 2017",
title = "Dilatometer as a scientific tool",
pages = "49-49",
url = "https://hdl.handle.net/21.15107/rcub_dais_3681"
}

Labus, N., Pavlović, V. B., Vasiljević, Z. Ž.,& Nikolić, M. V.. (2017). Dilatometer as a scientific tool. in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VI: New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, September 18-20, 2017
Belgrade : Serbian Ceramic Society., 49-49.
https://hdl.handle.net/21.15107/rcub_dais_3681

Labus N, Pavlović VB, Vasiljević ZŽ, Nikolić MV. Dilatometer as a scientific tool. in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VI: New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, September 18-20, 2017. 2017;:49-49.
https://hdl.handle.net/21.15107/rcub_dais_3681 .

Labus, Nebojša, Pavlović, Vladimir B., Vasiljević, Zorka Ž., Nikolić, Maria Vesna, "Dilatometer as a scientific tool" in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VI: New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, September 18-20, 2017 (2017):49-49,
https://hdl.handle.net/21.15107/rcub_dais_3681 .

TY  - CONF
AU  - Lazarević, R.
AU  - Kosanović, Darko
AU  - Pavlović, Vladimir B.
AU  - Đukić, S.
AU  - Maričić, Aleksa
PY  - 2017
UR  - http://dais.sanu.ac.rs/123456789/4769
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5736
AB  - The initial powder (16 % Fe2O3, 4 % BaCO3, 80 % BaTiO3) was mechanically activated in a planetary mill for 20, 80, 120, 160, 200 and 220 minutes in air. Modified Faraday method was used to perform magnetization measurements of compressed activated powder. The value of magnetization of these samples increases with increase in time of activation from 0.77 Am2kg-1 to 1.74 Am2kg-1. Thermomagnetic measurements in 20-600 °C temperature interval was used to investigate the dependence of magnetization on temperature. Multiple heating cycles of the sample activated for 120 min shows that after heating to 540 °C and 600 °C the value of magnetization increases 17 % and 62 %, respectively. Compressed powder samples were sintered for 2 hours at 1200 °C, leading to an increase in magnetization of 81 to 123 %. Thermomagnetic measurements of sintered samples in 20-450 °C temperature interval shows that sintered samples possess both ferromagnetic and ferroelectric properties. The relative dielectric constant of sintered samples at room temperature is around 8x104, depending on mechanical activation time.
PB  - Belgrade : Serbian Ceramic Society
C3  - Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VI: New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, September 18-20, 2017
T1  - Synthesis and Characterization of Multifferoics 16%(Fe2O3)4%(BaCO3)80%(BaTiO3)
EP  - 77
SP  - 77
UR  - https://hdl.handle.net/21.15107/rcub_dais_4769
ER  - 

@conference{
author = "Lazarević, R. and Kosanović, Darko and Pavlović, Vladimir B. and Đukić, S. and Maričić, Aleksa",
year = "2017",
abstract = "The initial powder (16 % Fe2O3, 4 % BaCO3, 80 % BaTiO3) was mechanically activated in a planetary mill for 20, 80, 120, 160, 200 and 220 minutes in air. Modified Faraday method was used to perform magnetization measurements of compressed activated powder. The value of magnetization of these samples increases with increase in time of activation from 0.77 Am2kg-1 to 1.74 Am2kg-1. Thermomagnetic measurements in 20-600 °C temperature interval was used to investigate the dependence of magnetization on temperature. Multiple heating cycles of the sample activated for 120 min shows that after heating to 540 °C and 600 °C the value of magnetization increases 17 % and 62 %, respectively. Compressed powder samples were sintered for 2 hours at 1200 °C, leading to an increase in magnetization of 81 to 123 %. Thermomagnetic measurements of sintered samples in 20-450 °C temperature interval shows that sintered samples possess both ferromagnetic and ferroelectric properties. The relative dielectric constant of sintered samples at room temperature is around 8x104, depending on mechanical activation time.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VI: New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, September 18-20, 2017",
title = "Synthesis and Characterization of Multifferoics 16%(Fe2O3)4%(BaCO3)80%(BaTiO3)",
pages = "77-77",
url = "https://hdl.handle.net/21.15107/rcub_dais_4769"
}

Lazarević, R., Kosanović, D., Pavlović, V. B., Đukić, S.,& Maričić, A.. (2017). Synthesis and Characterization of Multifferoics 16%(Fe2O3)4%(BaCO3)80%(BaTiO3). in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VI: New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, September 18-20, 2017
Belgrade : Serbian Ceramic Society., 77-77.
https://hdl.handle.net/21.15107/rcub_dais_4769

Lazarević R, Kosanović D, Pavlović VB, Đukić S, Maričić A. Synthesis and Characterization of Multifferoics 16%(Fe2O3)4%(BaCO3)80%(BaTiO3). in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VI: New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, September 18-20, 2017. 2017;:77-77.
https://hdl.handle.net/21.15107/rcub_dais_4769 .

Lazarević, R., Kosanović, Darko, Pavlović, Vladimir B., Đukić, S., Maričić, Aleksa, "Synthesis and Characterization of Multifferoics 16%(Fe2O3)4%(BaCO3)80%(BaTiO3)" in Program and the Book of Abstracts / Serbian Ceramic Society Conference Advanced Ceramics and Application VI: New Frontiers in Multifunctional Material Science and Processing, Serbia, Belgrade, September 18-20, 2017 (2017):77-77,
https://hdl.handle.net/21.15107/rcub_dais_4769 .

TY  - CONF
AU  - Labus, Nebojša
AU  - Vasiljević, Zorka Ž.
AU  - Aleksić, Obrad S.
AU  - Vuković, Miloljub
AU  - Marković, Smilja
AU  - Pavlović, Vladimir B.
AU  - Mentus, Slavko
AU  - Nikolić, Maria Vesna
PY  - 2016
UR  - http://dais.sanu.ac.rs/123456789/869
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5713
AB  - Commercial Mn-Zn powder (Mn0.63Zn0.37Fe2O4, 93 wt. % and Fe2O3 7 wt. %) was milled 0.5, 1, 2 and 4 hours in a planetary ball mill. Powders were characterized with XRD, SEM and particle seizer. Subsequent heating was monitored on TGA/DTA in air atmosphere. After compaction of the milled powders, sintering was also performed in a dilatometric device. Sintered specimens were characterized microstructurally with SEM on a fresh breakage. Ferrite powders changed with milling as well as with second run heating are characterised to approach the possible best ratio of the milling and heating that should be used to obtain desired micrstructure.
PB  - Belgrade : Serbian Ceramic Society
C3  - Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : V Serbian Ceramic Society Conference, Sep 21-23 September 2016, Belgrade
T1  - Characterisation of Mn0.63Zn0.37Fe2O4 powders after intensive milling and subsequent thermal treatment
EP  - 48
SP  - 48
UR  - https://hdl.handle.net/21.15107/rcub_dais_869
ER  - 

@conference{
author = "Labus, Nebojša and Vasiljević, Zorka Ž. and Aleksić, Obrad S. and Vuković, Miloljub and Marković, Smilja and Pavlović, Vladimir B. and Mentus, Slavko and Nikolić, Maria Vesna",
year = "2016",
abstract = "Commercial Mn-Zn powder (Mn0.63Zn0.37Fe2O4, 93 wt. % and Fe2O3 7 wt. %) was milled 0.5, 1, 2 and 4 hours in a planetary ball mill. Powders were characterized with XRD, SEM and particle seizer. Subsequent heating was monitored on TGA/DTA in air atmosphere. After compaction of the milled powders, sintering was also performed in a dilatometric device. Sintered specimens were characterized microstructurally with SEM on a fresh breakage. Ferrite powders changed with milling as well as with second run heating are characterised to approach the possible best ratio of the milling and heating that should be used to obtain desired micrstructure.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : V Serbian Ceramic Society Conference, Sep 21-23 September 2016, Belgrade",
title = "Characterisation of Mn0.63Zn0.37Fe2O4 powders after intensive milling and subsequent thermal treatment",
pages = "48-48",
url = "https://hdl.handle.net/21.15107/rcub_dais_869"
}

Labus, N., Vasiljević, Z. Ž., Aleksić, O. S., Vuković, M., Marković, S., Pavlović, V. B., Mentus, S.,& Nikolić, M. V.. (2016). Characterisation of Mn0.63Zn0.37Fe2O4 powders after intensive milling and subsequent thermal treatment. in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : V Serbian Ceramic Society Conference, Sep 21-23 September 2016, Belgrade
Belgrade : Serbian Ceramic Society., 48-48.
https://hdl.handle.net/21.15107/rcub_dais_869

Labus N, Vasiljević ZŽ, Aleksić OS, Vuković M, Marković S, Pavlović VB, Mentus S, Nikolić MV. Characterisation of Mn0.63Zn0.37Fe2O4 powders after intensive milling and subsequent thermal treatment. in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : V Serbian Ceramic Society Conference, Sep 21-23 September 2016, Belgrade. 2016;:48-48.
https://hdl.handle.net/21.15107/rcub_dais_869 .

Labus, Nebojša, Vasiljević, Zorka Ž., Aleksić, Obrad S., Vuković, Miloljub, Marković, Smilja, Pavlović, Vladimir B., Mentus, Slavko, Nikolić, Maria Vesna, "Characterisation of Mn0.63Zn0.37Fe2O4 powders after intensive milling and subsequent thermal treatment" in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : V Serbian Ceramic Society Conference, Sep 21-23 September 2016, Belgrade (2016):48-48,
https://hdl.handle.net/21.15107/rcub_dais_869 .

TY  - CONF
AU  - Obradović, Nina
AU  - Filipović, Suzana
AU  - Marković, Smilja
AU  - Mitrić, Miodrag
AU  - Antić, Vesna
AU  - Pavlović, Vladimir B.
PY  - 2016
UR  - http://dais.sanu.ac.rs/123456789/874
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5714
AB  - In this study, highly porous macro- and micro-cellular wollastonite-based ceramics was synthesized. Ceramic precursor, methylhydrocyclosiloxane, together with micro-sized CaCO3, was used as starting material. After 20 min of ultrasound treatment, and calcination at 250 oC for 30 min, different pore-forming agents were added to the as-obtained powders. Differential thermal analysis was used to determine characteristic temperatures of processes occurring within powders during heating. Based on the obtained results, sintering regime was set up. Prepared mixtures were pressed into pallets and sintered at 900 oC. During the sintering regime, highly porous wollastonite-based ceramics was obtained. The phase composition of the sintered samples as well as microstructures was analyzed by the means of X-ray diffraction method and SEM. Two-phase system was detected in all samples, CaSiO3 wollastonite and Ca2SiO4 larnite, and their ratio varied with each pore-forming agent. It was observed that addition of different pore-forming agent resulted in significantly different microstructures.
PB  - Belgrade : Serbian Ceramic Society
C3  - Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : V Serbian Ceramic Society Conference, Sep 21-23 September 2016, Belgrade
T1  - Influence of different pore-forming agents on wollastonite microstructures
EP  - 42
SP  - 42
UR  - https://hdl.handle.net/21.15107/rcub_dais_874
ER  - 

@conference{
author = "Obradović, Nina and Filipović, Suzana and Marković, Smilja and Mitrić, Miodrag and Antić, Vesna and Pavlović, Vladimir B.",
year = "2016",
abstract = "In this study, highly porous macro- and micro-cellular wollastonite-based ceramics was synthesized. Ceramic precursor, methylhydrocyclosiloxane, together with micro-sized CaCO3, was used as starting material. After 20 min of ultrasound treatment, and calcination at 250 oC for 30 min, different pore-forming agents were added to the as-obtained powders. Differential thermal analysis was used to determine characteristic temperatures of processes occurring within powders during heating. Based on the obtained results, sintering regime was set up. Prepared mixtures were pressed into pallets and sintered at 900 oC. During the sintering regime, highly porous wollastonite-based ceramics was obtained. The phase composition of the sintered samples as well as microstructures was analyzed by the means of X-ray diffraction method and SEM. Two-phase system was detected in all samples, CaSiO3 wollastonite and Ca2SiO4 larnite, and their ratio varied with each pore-forming agent. It was observed that addition of different pore-forming agent resulted in significantly different microstructures.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : V Serbian Ceramic Society Conference, Sep 21-23 September 2016, Belgrade",
title = "Influence of different pore-forming agents on wollastonite microstructures",
pages = "42-42",
url = "https://hdl.handle.net/21.15107/rcub_dais_874"
}

Obradović, N., Filipović, S., Marković, S., Mitrić, M., Antić, V.,& Pavlović, V. B.. (2016). Influence of different pore-forming agents on wollastonite microstructures. in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : V Serbian Ceramic Society Conference, Sep 21-23 September 2016, Belgrade
Belgrade : Serbian Ceramic Society., 42-42.
https://hdl.handle.net/21.15107/rcub_dais_874

Obradović N, Filipović S, Marković S, Mitrić M, Antić V, Pavlović VB. Influence of different pore-forming agents on wollastonite microstructures. in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : V Serbian Ceramic Society Conference, Sep 21-23 September 2016, Belgrade. 2016;:42-42.
https://hdl.handle.net/21.15107/rcub_dais_874 .

Obradović, Nina, Filipović, Suzana, Marković, Smilja, Mitrić, Miodrag, Antić, Vesna, Pavlović, Vladimir B., "Influence of different pore-forming agents on wollastonite microstructures" in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : V Serbian Ceramic Society Conference, Sep 21-23 September 2016, Belgrade (2016):42-42,
https://hdl.handle.net/21.15107/rcub_dais_874 .

TY  - CONF
AU  - Rusmirović, Jelena
AU  - Lević, Steva
AU  - Pavlović, Vladimir B.
AU  - Marinković, Aleksandar
PY  - 2016
UR  - http://dais.sanu.ac.rs/123456789/876
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5715
AB  - Novel macro/micro-porous monolith material containing surface amino functional groups was developed for efficient cationic pollutant removal. The monolith was prepared by copolymerization process of monomers glycidyl methacrylate (GMA), ethylene glycol dimethacrylate (EGDMA) and modified low molar mass poly(methyl methacrylate) (PMMA). In order to improve mechanical stability of GMA-EGDMA monolith, surface of PMMA was modified with ethanol amine in first step, and introduction of methacryloyl chloride in a second step produced m-PMMA. Synthesized GMA-EGDMA-m-PMMA monolith was modified with poly(ethylene imine) (PEI). The effectiveness of copolymerization, as well as introduction of amino groups via PEI modification were confirmed by FTIR and Raman analyses. The morphological appearance of the synthesized monolith, examined by scanning electron microscopy (SEM), clearly indicates porous structure. The results of textural parameters, i.e. monolith porosity, determined by using liquid saturating method, indicate high degree of porosity. Cationic pollutant removal capacity, cadmium and lead, of 32.0 and 42.5 mg g−1 at 25 °C indicates that this monolith is high efficient. This macro/micro-porous monolith could be a promising adsorbent because of its low-cost synthesis process and excellent performance.
PB  - Belgrade : Serbian Ceramic Society
C3  - Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : V Serbian Ceramic Society Conference, Sep 21-23 September 2016, Belgrade
T1  - Novel amino modified GMA-EGDMA-m-PMMA monolith for efficient cationic pollutant removal
EP  - 63
SP  - 63
UR  - https://hdl.handle.net/21.15107/rcub_dais_876
ER  - 

@conference{
author = "Rusmirović, Jelena and Lević, Steva and Pavlović, Vladimir B. and Marinković, Aleksandar",
year = "2016",
abstract = "Novel macro/micro-porous monolith material containing surface amino functional groups was developed for efficient cationic pollutant removal. The monolith was prepared by copolymerization process of monomers glycidyl methacrylate (GMA), ethylene glycol dimethacrylate (EGDMA) and modified low molar mass poly(methyl methacrylate) (PMMA). In order to improve mechanical stability of GMA-EGDMA monolith, surface of PMMA was modified with ethanol amine in first step, and introduction of methacryloyl chloride in a second step produced m-PMMA. Synthesized GMA-EGDMA-m-PMMA monolith was modified with poly(ethylene imine) (PEI). The effectiveness of copolymerization, as well as introduction of amino groups via PEI modification were confirmed by FTIR and Raman analyses. The morphological appearance of the synthesized monolith, examined by scanning electron microscopy (SEM), clearly indicates porous structure. The results of textural parameters, i.e. monolith porosity, determined by using liquid saturating method, indicate high degree of porosity. Cationic pollutant removal capacity, cadmium and lead, of 32.0 and 42.5 mg g−1 at 25 °C indicates that this monolith is high efficient. This macro/micro-porous monolith could be a promising adsorbent because of its low-cost synthesis process and excellent performance.",
publisher = "Belgrade : Serbian Ceramic Society",
journal = "Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : V Serbian Ceramic Society Conference, Sep 21-23 September 2016, Belgrade",
title = "Novel amino modified GMA-EGDMA-m-PMMA monolith for efficient cationic pollutant removal",
pages = "63-63",
url = "https://hdl.handle.net/21.15107/rcub_dais_876"
}

Rusmirović, J., Lević, S., Pavlović, V. B.,& Marinković, A.. (2016). Novel amino modified GMA-EGDMA-m-PMMA monolith for efficient cationic pollutant removal. in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : V Serbian Ceramic Society Conference, Sep 21-23 September 2016, Belgrade
Belgrade : Serbian Ceramic Society., 63-63.
https://hdl.handle.net/21.15107/rcub_dais_876

Rusmirović J, Lević S, Pavlović VB, Marinković A. Novel amino modified GMA-EGDMA-m-PMMA monolith for efficient cationic pollutant removal. in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : V Serbian Ceramic Society Conference, Sep 21-23 September 2016, Belgrade. 2016;:63-63.
https://hdl.handle.net/21.15107/rcub_dais_876 .

Rusmirović, Jelena, Lević, Steva, Pavlović, Vladimir B., Marinković, Aleksandar, "Novel amino modified GMA-EGDMA-m-PMMA monolith for efficient cationic pollutant removal" in Advanced Ceramics and Application : new frontiers in multifunctional material science and processing : program and the book of abstracts : V Serbian Ceramic Society Conference, Sep 21-23 September 2016, Belgrade (2016):63-63,
https://hdl.handle.net/21.15107/rcub_dais_876 .