TY  - JOUR
AU  - Balaban, Milica
AU  - Antić, Vesna
AU  - Pergal, Marija V.
AU  - Godjevac, Dejan
AU  - Francolini, Iolanda
AU  - Martinelli, Andrea
AU  - Rogan, Jelena
AU  - Djonlagić, Jasna
PY  - 2013
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/3294
AB  - Segmented poly(urethane-urea-siloxane)s (PUUS) were synthesized using 4,4'-methylenediphenyl diisocyanate (MDI) and ethylene diamine (ED) as the hard segment components and hydroxypropyl-terminated poly(dimethylsiloxane) (PDMS) as the soft segment component, where the hard segment content ranged from 38 to 65 wt%. Segmented PUUSs were prepared by a two-step polymerization procedure in tetrahydrofuran/N-methylpyrrolidone (THF/NMP) mixture with a large proportion of polar solvent. The structure, composition and hard segment length were determined by C-13 NMR and two-dimensional correlation spectroscopy. Thermal, mechanical, small-angle X-ray scattering and hydrogen bonding analyses indicated the formation of the microphase-separated copolymers with high tensile strength. Globular superstructures observed in the copolymer films by scanning electron microscopy (SEM) and atomic force microscopy (AFM) were probably arisen from the microstructural organization of the MDI-ED segments, depending on their content and length. The PUUS copolymers showed high water resistance and became more hydrophobic with increasing weight fraction of PDMS.
PB  - Springer, New York
T2  - Polymer Bulletin
T1  - Influence of the chemical structure of poly(urea-urethane-siloxane)s on their morphological, surface and thermal properties
EP  - 2518
IS  - 9
SP  - 2493
VL  - 70
DO  - 10.1007/s00289-013-0968-2
ER  - 

@article{
author = "Balaban, Milica and Antić, Vesna and Pergal, Marija V. and Godjevac, Dejan and Francolini, Iolanda and Martinelli, Andrea and Rogan, Jelena and Djonlagić, Jasna",
year = "2013",
abstract = "Segmented poly(urethane-urea-siloxane)s (PUUS) were synthesized using 4,4'-methylenediphenyl diisocyanate (MDI) and ethylene diamine (ED) as the hard segment components and hydroxypropyl-terminated poly(dimethylsiloxane) (PDMS) as the soft segment component, where the hard segment content ranged from 38 to 65 wt%. Segmented PUUSs were prepared by a two-step polymerization procedure in tetrahydrofuran/N-methylpyrrolidone (THF/NMP) mixture with a large proportion of polar solvent. The structure, composition and hard segment length were determined by C-13 NMR and two-dimensional correlation spectroscopy. Thermal, mechanical, small-angle X-ray scattering and hydrogen bonding analyses indicated the formation of the microphase-separated copolymers with high tensile strength. Globular superstructures observed in the copolymer films by scanning electron microscopy (SEM) and atomic force microscopy (AFM) were probably arisen from the microstructural organization of the MDI-ED segments, depending on their content and length. The PUUS copolymers showed high water resistance and became more hydrophobic with increasing weight fraction of PDMS.",
publisher = "Springer, New York",
journal = "Polymer Bulletin",
title = "Influence of the chemical structure of poly(urea-urethane-siloxane)s on their morphological, surface and thermal properties",
pages = "2518-2493",
number = "9",
volume = "70",
doi = "10.1007/s00289-013-0968-2"
}

Balaban, M., Antić, V., Pergal, M. V., Godjevac, D., Francolini, I., Martinelli, A., Rogan, J.,& Djonlagić, J.. (2013). Influence of the chemical structure of poly(urea-urethane-siloxane)s on their morphological, surface and thermal properties. in Polymer Bulletin
Springer, New York., 70(9), 2493-2518.
https://doi.org/10.1007/s00289-013-0968-2

Balaban M, Antić V, Pergal MV, Godjevac D, Francolini I, Martinelli A, Rogan J, Djonlagić J. Influence of the chemical structure of poly(urea-urethane-siloxane)s on their morphological, surface and thermal properties. in Polymer Bulletin. 2013;70(9):2493-2518.
doi:10.1007/s00289-013-0968-2 .

Balaban, Milica, Antić, Vesna, Pergal, Marija V., Godjevac, Dejan, Francolini, Iolanda, Martinelli, Andrea, Rogan, Jelena, Djonlagić, Jasna, "Influence of the chemical structure of poly(urea-urethane-siloxane)s on their morphological, surface and thermal properties" in Polymer Bulletin, 70, no. 9 (2013):2493-2518,
https://doi.org/10.1007/s00289-013-0968-2 . .

TY  - JOUR
AU  - Balaban, Milica
AU  - Antić, Vesna
AU  - Pergal, Marija V.
AU  - Francolini, Iolanda
AU  - Martinelli, Andrea
AU  - Djonlagić, Jasna
PY  - 2012
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/2969
AB  - Segmented poly(urethane-urea-siloxanes) (PUUS) based on 4,4'- methylene diphenyl diisocyanate-ethylene diamine (MDI-ED) hard segments and hydroxypropyl-terminated poly(dimethylsiloxane) (PDMS, Mn = 1000 g mol-1) soft segments were prepared under various experimental conditions. The copolymers with constant molar ratio of hard and soft segments (PDMS:MDI:ED = 1:2:1; 20 wt. % of the hard segments) were synthesized in two different solvent mixtures, by a two-step polyaddition procedure. The first one was tetrahydrofuran/N,N-dimethylacetamide (THF/DMAc) with different co-solvent ratios (1/1, 1/2 and 1/9, v/v), whereas the second one was tetrahydrofuran/N-methylpyrrolidone (THF/NMP, 1/9, v/v). The reaction conditions were optimized by varying the co-solvents ratio, the concentration of the catalyst, the initial monomer concentration, as well as the time of the first and the second step of the reaction. The effects of the experimental conditions on the size of the PUUS were investigated by gel permeation chromatography (GPC) and dilute solution viscometry. The copolymers with the highest molecular weights were obtained in the THF/NMP mixture (1/9, v/v). The structure and composition of the copolymers were determined by 1H-NMR and FTIR spectroscopy. The morphology of the synthesized copolymers was investigated by atomic force microscopy (AFM), while the thermal properties were studied by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The surface properties were evaluated by measuring the water contact angle (WCA). The copolymers exhibited phase-separated microstructure and were stable up to 200°C in nitrogen.
AB  - Segmentirani poli(uretan-urea-siloksani) (PUUS), sa tvrdim segmentima na bazi 4,4'-metilendifenildiizocijanata i etilendiamina (MDI-ED) i mekim segmentima na bazi hidroksipropil-terminiranog poli(dimetilsiloksana) (PDMS, Mn = 1000 g mol-1), sintetisani su pod različitim eksperimentalnim uslovima. Kopolimeri sa konstantnim molskim odnosom tvrdih i mekih segmenata (PDMS:MDI:ED = 1:2:1; 20 mas. % tvrdih segmenata), sintetisani su u dve različite smeše rastvarača kao reakcionog medijuma, metodom dvostepene poliadicije. Prva kombinacija rastvarača je bila smeša tetrahidrofurana (THF) i N,N-dimetilacetamida (DMAc), dok je u drugom slučaju korišćena smeša THF-a i N-metilpirolidona (NMP). Reakcioni uslovi su optimizovani u pogledu odnosa ko-rastvarača, koncentracije katalizatora, početne koncentracije monomera i vremena odigravanja prve i druge faze reakcije. Ispitan je uticaj primenjenih eksperimentalnih uslova na veličinu PUUS primenom gel-propusne hromatografije (GPC) i viskozimetrije razblaženih rastvora [η]. Kopolimeri najvećih molarnih masa su dobijeni u smeši THF/NMP (1/9, v/v). Struktura i sastav kopolimera su okarakterisani 1H-NMR i FTIR spektroskopijom. Morfologija sintetisanih kopolimera je ispitana mikroskopijom atomskih sila (AFM), dok su termička svojstva ispitana diferencijalnom skenirajućom kalorimetrijom (DSC) i termogravimetrijskom analizom (TGA). Površinska svojstva kopolimera su ispitana određivanjem kontaktnih uglova sa vodom (WCA). Kopolimeri su pokazali dvofaznu mikrostrukturu i bili su stabilni do 200°C u atmosteri azota.
PB  - Srpsko hemijsko društvo, Beograd
T2  - JOURNAL OF THE SERBIAN CHEMICAL SOCIETY
T1  - The effect of polar solvents on the synthesis of poly(urethane-urea-siloxane)s
T1  - Uticaj polarnih rastvarača na sintezu poli(uretan-urea-siloksana)
EP  - 1481
IS  - 10
SP  - 1457
VL  - 77
DO  - 10.2298/JSC111025056B
ER  - 

@article{
author = "Balaban, Milica and Antić, Vesna and Pergal, Marija V. and Francolini, Iolanda and Martinelli, Andrea and Djonlagić, Jasna",
year = "2012",
abstract = "Segmented poly(urethane-urea-siloxanes) (PUUS) based on 4,4'- methylene diphenyl diisocyanate-ethylene diamine (MDI-ED) hard segments and hydroxypropyl-terminated poly(dimethylsiloxane) (PDMS, Mn = 1000 g mol-1) soft segments were prepared under various experimental conditions. The copolymers with constant molar ratio of hard and soft segments (PDMS:MDI:ED = 1:2:1; 20 wt. % of the hard segments) were synthesized in two different solvent mixtures, by a two-step polyaddition procedure. The first one was tetrahydrofuran/N,N-dimethylacetamide (THF/DMAc) with different co-solvent ratios (1/1, 1/2 and 1/9, v/v), whereas the second one was tetrahydrofuran/N-methylpyrrolidone (THF/NMP, 1/9, v/v). The reaction conditions were optimized by varying the co-solvents ratio, the concentration of the catalyst, the initial monomer concentration, as well as the time of the first and the second step of the reaction. The effects of the experimental conditions on the size of the PUUS were investigated by gel permeation chromatography (GPC) and dilute solution viscometry. The copolymers with the highest molecular weights were obtained in the THF/NMP mixture (1/9, v/v). The structure and composition of the copolymers were determined by 1H-NMR and FTIR spectroscopy. The morphology of the synthesized copolymers was investigated by atomic force microscopy (AFM), while the thermal properties were studied by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The surface properties were evaluated by measuring the water contact angle (WCA). The copolymers exhibited phase-separated microstructure and were stable up to 200°C in nitrogen., Segmentirani poli(uretan-urea-siloksani) (PUUS), sa tvrdim segmentima na bazi 4,4'-metilendifenildiizocijanata i etilendiamina (MDI-ED) i mekim segmentima na bazi hidroksipropil-terminiranog poli(dimetilsiloksana) (PDMS, Mn = 1000 g mol-1), sintetisani su pod različitim eksperimentalnim uslovima. Kopolimeri sa konstantnim molskim odnosom tvrdih i mekih segmenata (PDMS:MDI:ED = 1:2:1; 20 mas. % tvrdih segmenata), sintetisani su u dve različite smeše rastvarača kao reakcionog medijuma, metodom dvostepene poliadicije. Prva kombinacija rastvarača je bila smeša tetrahidrofurana (THF) i N,N-dimetilacetamida (DMAc), dok je u drugom slučaju korišćena smeša THF-a i N-metilpirolidona (NMP). Reakcioni uslovi su optimizovani u pogledu odnosa ko-rastvarača, koncentracije katalizatora, početne koncentracije monomera i vremena odigravanja prve i druge faze reakcije. Ispitan je uticaj primenjenih eksperimentalnih uslova na veličinu PUUS primenom gel-propusne hromatografije (GPC) i viskozimetrije razblaženih rastvora [η]. Kopolimeri najvećih molarnih masa su dobijeni u smeši THF/NMP (1/9, v/v). Struktura i sastav kopolimera su okarakterisani 1H-NMR i FTIR spektroskopijom. Morfologija sintetisanih kopolimera je ispitana mikroskopijom atomskih sila (AFM), dok su termička svojstva ispitana diferencijalnom skenirajućom kalorimetrijom (DSC) i termogravimetrijskom analizom (TGA). Površinska svojstva kopolimera su ispitana određivanjem kontaktnih uglova sa vodom (WCA). Kopolimeri su pokazali dvofaznu mikrostrukturu i bili su stabilni do 200°C u atmosteri azota.",
publisher = "Srpsko hemijsko društvo, Beograd",
journal = "JOURNAL OF THE SERBIAN CHEMICAL SOCIETY",
title = "The effect of polar solvents on the synthesis of poly(urethane-urea-siloxane)s, Uticaj polarnih rastvarača na sintezu poli(uretan-urea-siloksana)",
pages = "1481-1457",
number = "10",
volume = "77",
doi = "10.2298/JSC111025056B"
}

Balaban, M., Antić, V., Pergal, M. V., Francolini, I., Martinelli, A.,& Djonlagić, J.. (2012). The effect of polar solvents on the synthesis of poly(urethane-urea-siloxane)s. in JOURNAL OF THE SERBIAN CHEMICAL SOCIETY
Srpsko hemijsko društvo, Beograd., 77(10), 1457-1481.
https://doi.org/10.2298/JSC111025056B

Balaban M, Antić V, Pergal MV, Francolini I, Martinelli A, Djonlagić J. The effect of polar solvents on the synthesis of poly(urethane-urea-siloxane)s. in JOURNAL OF THE SERBIAN CHEMICAL SOCIETY. 2012;77(10):1457-1481.
doi:10.2298/JSC111025056B .

Balaban, Milica, Antić, Vesna, Pergal, Marija V., Francolini, Iolanda, Martinelli, Andrea, Djonlagić, Jasna, "The effect of polar solvents on the synthesis of poly(urethane-urea-siloxane)s" in JOURNAL OF THE SERBIAN CHEMICAL SOCIETY, 77, no. 10 (2012):1457-1481,
https://doi.org/10.2298/JSC111025056B . .