Djokić, Veljko

Link to this page

Authority KeyName Variants
orcid::0000-0003-2541-0420
  • Djokić, Veljko (4)

Author's Bibliography

Effect of the Deposition of Vanadium-Oxide on the Photocatalytic Activity of TiO2 Nanotubes and Its Photodiode Performance Interfaced with CH3NH3PbI3 Single Crystal

Vujančević, Jelena; Andričević, Pavao; Djokić, Veljko; Blagojević, Vladimir; Pavlović, Vera P.; Ćirković, Jovana; Horváth, Endre; Forró, László; Karoui, Abdennaceur; Pavlović, Vladimir B.; Janaćković, Djordje

(2023)

TY  - JOUR
AU  - Vujančević, Jelena
AU  - Andričević, Pavao
AU  - Djokić, Veljko
AU  - Blagojević, Vladimir
AU  - Pavlović, Vera P.
AU  - Ćirković, Jovana
AU  - Horváth, Endre
AU  - Forró, László
AU  - Karoui, Abdennaceur
AU  - Pavlović, Vladimir B.
AU  - Janaćković, Djordje
PY  - 2023
UR  - https://www.mdpi.com/2073-4344/13/2/352
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/6305
AB  - In this study, we report the influence of vanadium oxide (VO), as a photosensitive component, on the photoactivity of TiO2 nanotubes (TNTs). A series of TNTs of varying tube diameter were synthesized by the anodization of titanium foils at different voltages, while vanadium oxide was deposited on TNTs by wet chemical deposition. An improvement in the optical properties of nanotubes was observed after the deposition of vanadium oxide. An improvement in the optical properties (redshift in UV-Vis spectra) of TNTs and TNT/VO was noted. The photocatalytic activity was improved with increasing tube diameter, while it was weakened after the deposition of VO. Furthermore, photoactivity was investigated in photodiodes based on TNTs or TNT/VO and single crystals of CH3NH3PbI3. The photoelectric measurement revealed that different TNT diameters did not influence the I-V characteristic of the photodiodes, while the deposition of VO improved the photocurrent for smaller TNTs.
T2  - Catalysts
T2  - Catalysts
T1  - Effect of the Deposition of Vanadium-Oxide on the Photocatalytic Activity of TiO2 Nanotubes and Its Photodiode Performance Interfaced with CH3NH3PbI3 Single Crystal
IS  - 2
SP  - 352
VL  - 13
DO  - 10.3390/catal13020352
ER  - 
@article{
author = "Vujančević, Jelena and Andričević, Pavao and Djokić, Veljko and Blagojević, Vladimir and Pavlović, Vera P. and Ćirković, Jovana and Horváth, Endre and Forró, László and Karoui, Abdennaceur and Pavlović, Vladimir B. and Janaćković, Djordje",
year = "2023",
abstract = "In this study, we report the influence of vanadium oxide (VO), as a photosensitive component, on the photoactivity of TiO2 nanotubes (TNTs). A series of TNTs of varying tube diameter were synthesized by the anodization of titanium foils at different voltages, while vanadium oxide was deposited on TNTs by wet chemical deposition. An improvement in the optical properties of nanotubes was observed after the deposition of vanadium oxide. An improvement in the optical properties (redshift in UV-Vis spectra) of TNTs and TNT/VO was noted. The photocatalytic activity was improved with increasing tube diameter, while it was weakened after the deposition of VO. Furthermore, photoactivity was investigated in photodiodes based on TNTs or TNT/VO and single crystals of CH3NH3PbI3. The photoelectric measurement revealed that different TNT diameters did not influence the I-V characteristic of the photodiodes, while the deposition of VO improved the photocurrent for smaller TNTs.",
journal = "Catalysts, Catalysts",
title = "Effect of the Deposition of Vanadium-Oxide on the Photocatalytic Activity of TiO2 Nanotubes and Its Photodiode Performance Interfaced with CH3NH3PbI3 Single Crystal",
number = "2",
pages = "352",
volume = "13",
doi = "10.3390/catal13020352"
}
Vujančević, J., Andričević, P., Djokić, V., Blagojević, V., Pavlović, V. P., Ćirković, J., Horváth, E., Forró, L., Karoui, A., Pavlović, V. B.,& Janaćković, D.. (2023). Effect of the Deposition of Vanadium-Oxide on the Photocatalytic Activity of TiO2 Nanotubes and Its Photodiode Performance Interfaced with CH3NH3PbI3 Single Crystal. in Catalysts, 13(2), 352.
https://doi.org/10.3390/catal13020352
Vujančević J, Andričević P, Djokić V, Blagojević V, Pavlović VP, Ćirković J, Horváth E, Forró L, Karoui A, Pavlović VB, Janaćković D. Effect of the Deposition of Vanadium-Oxide on the Photocatalytic Activity of TiO2 Nanotubes and Its Photodiode Performance Interfaced with CH3NH3PbI3 Single Crystal. in Catalysts. 2023;13(2):352.
doi:10.3390/catal13020352 .
Vujančević, Jelena, Andričević, Pavao, Djokić, Veljko, Blagojević, Vladimir, Pavlović, Vera P., Ćirković, Jovana, Horváth, Endre, Forró, László, Karoui, Abdennaceur, Pavlović, Vladimir B., Janaćković, Djordje, "Effect of the Deposition of Vanadium-Oxide on the Photocatalytic Activity of TiO2 Nanotubes and Its Photodiode Performance Interfaced with CH3NH3PbI3 Single Crystal" in Catalysts, 13, no. 2 (2023):352,
https://doi.org/10.3390/catal13020352 . .

Synthesis and characterization of nanocrystalline polyhedral oligo silsesquioxanes (POSS) with cross-linkable functionalities

Tomić, Nataša Z.; Vuksanović, Marija M.; Djokić, Veljko; Mitrić, Miodrag; Simić, Milena R.; Pavlović, Vladimir; Jancić-Heinemann, Radmila; Marinković, Aleksandar D.

(Pergamon-Elsevier Science Ltd, Oxford, 2019)

TY  - JOUR
AU  - Tomić, Nataša Z.
AU  - Vuksanović, Marija M.
AU  - Djokić, Veljko
AU  - Mitrić, Miodrag
AU  - Simić, Milena R.
AU  - Pavlović, Vladimir
AU  - Jancić-Heinemann, Radmila
AU  - Marinković, Aleksandar D.
PY  - 2019
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5002
AB  - A facile synthesis was employed for three polyhedral oligo silsequioxanes (POSS), obtaining incompletely condensed structures with fern-like and cubic morphologies. Proton nuclear magnetic resonance spectroscopy (H-1 NMR) indicated the successful synthesis of the proposed POSS structures. The hydroxyl groups affected the manner and type of POSS morphology, as seen under a scanning electron microscope (SEM) and a transmission electron microscope (TEM). Fourier-transform infrared spectroscopy (FTIR) showed the availability of surface hydroxyl groups that contributed to the formation of a higher amount of char residue, as found from TGA analysis. The highest decomposition temperature (281 degrees C) and the least char residue were found for a cross-linkable POSS, obtained by esterification of the hydroxyl groups with methacryloyl chloride.
PB  - Pergamon-Elsevier Science Ltd, Oxford
T2  - Polyhedron
T1  - Synthesis and characterization of nanocrystalline polyhedral oligo silsesquioxanes (POSS) with cross-linkable functionalities
EP  - 304
SP  - 299
VL  - 171
DO  - 10.1016/j.poly.2019.06.059
ER  - 
@article{
author = "Tomić, Nataša Z. and Vuksanović, Marija M. and Djokić, Veljko and Mitrić, Miodrag and Simić, Milena R. and Pavlović, Vladimir and Jancić-Heinemann, Radmila and Marinković, Aleksandar D.",
year = "2019",
abstract = "A facile synthesis was employed for three polyhedral oligo silsequioxanes (POSS), obtaining incompletely condensed structures with fern-like and cubic morphologies. Proton nuclear magnetic resonance spectroscopy (H-1 NMR) indicated the successful synthesis of the proposed POSS structures. The hydroxyl groups affected the manner and type of POSS morphology, as seen under a scanning electron microscope (SEM) and a transmission electron microscope (TEM). Fourier-transform infrared spectroscopy (FTIR) showed the availability of surface hydroxyl groups that contributed to the formation of a higher amount of char residue, as found from TGA analysis. The highest decomposition temperature (281 degrees C) and the least char residue were found for a cross-linkable POSS, obtained by esterification of the hydroxyl groups with methacryloyl chloride.",
publisher = "Pergamon-Elsevier Science Ltd, Oxford",
journal = "Polyhedron",
title = "Synthesis and characterization of nanocrystalline polyhedral oligo silsesquioxanes (POSS) with cross-linkable functionalities",
pages = "304-299",
volume = "171",
doi = "10.1016/j.poly.2019.06.059"
}
Tomić, N. Z., Vuksanović, M. M., Djokić, V., Mitrić, M., Simić, M. R., Pavlović, V., Jancić-Heinemann, R.,& Marinković, A. D.. (2019). Synthesis and characterization of nanocrystalline polyhedral oligo silsesquioxanes (POSS) with cross-linkable functionalities. in Polyhedron
Pergamon-Elsevier Science Ltd, Oxford., 171, 299-304.
https://doi.org/10.1016/j.poly.2019.06.059
Tomić NZ, Vuksanović MM, Djokić V, Mitrić M, Simić MR, Pavlović V, Jancić-Heinemann R, Marinković AD. Synthesis and characterization of nanocrystalline polyhedral oligo silsesquioxanes (POSS) with cross-linkable functionalities. in Polyhedron. 2019;171:299-304.
doi:10.1016/j.poly.2019.06.059 .
Tomić, Nataša Z., Vuksanović, Marija M., Djokić, Veljko, Mitrić, Miodrag, Simić, Milena R., Pavlović, Vladimir, Jancić-Heinemann, Radmila, Marinković, Aleksandar D., "Synthesis and characterization of nanocrystalline polyhedral oligo silsesquioxanes (POSS) with cross-linkable functionalities" in Polyhedron, 171 (2019):299-304,
https://doi.org/10.1016/j.poly.2019.06.059 . .
1
3
3
3

Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites

Rusmirović, Jelena D.; Ivanović, Jasna Z.; Pavlović, Vladimir; Rakić, Vesna; Rancić, Milica P.; Djokić, Veljko; Marinković, Aleksandar D.

(Elsevier Sci Ltd, Oxford, 2017)

TY  - JOUR
AU  - Rusmirović, Jelena D.
AU  - Ivanović, Jasna Z.
AU  - Pavlović, Vladimir
AU  - Rakić, Vesna
AU  - Rancić, Milica P.
AU  - Djokić, Veljko
AU  - Marinković, Aleksandar D.
PY  - 2017
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/4380
AB  - The influence of modification and vacuum/supercritical CO2 (scCO(2)) drying methods on the surface properties, morphology and thermal stability of cellulose nanocrystals (NC) was presented in this study. Introduction of reactive vinyl groups on NC surface was performed by either direct esterification with oleic acid, linseed or sunflower oil fatty acids; or by amidation of maleic acid/ethylene diamine with methyl ester of fatty acid. Obtained modified NC (m-NC) were characterized using MR and Raman spectroscopy; and by determination of acid, iodine and ester values. Structural analysis of m-NC showed varieties of forms, from spongy to nanostructural non-uniform layered morphology with observable agglomeration, which confirmed morphology dependence on modification/processing methods Thermogravimetry-MS spectrometry showed different thermal stability and degradation pathways of NC/m-NC. Incorporation of 1 wt% of reactive m-NC in unsaturated polyester lead to high performance nanocomposites and contributed to increase of stress at break in the range from 76 to 93%.
PB  - Elsevier Sci Ltd, Oxford
T2  - Carbohydrate Polymers
T1  - Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites
EP  - 74
SP  - 64
VL  - 164
DO  - 10.1016/j.carbpol.2017.01.086
ER  - 
@article{
author = "Rusmirović, Jelena D. and Ivanović, Jasna Z. and Pavlović, Vladimir and Rakić, Vesna and Rancić, Milica P. and Djokić, Veljko and Marinković, Aleksandar D.",
year = "2017",
abstract = "The influence of modification and vacuum/supercritical CO2 (scCO(2)) drying methods on the surface properties, morphology and thermal stability of cellulose nanocrystals (NC) was presented in this study. Introduction of reactive vinyl groups on NC surface was performed by either direct esterification with oleic acid, linseed or sunflower oil fatty acids; or by amidation of maleic acid/ethylene diamine with methyl ester of fatty acid. Obtained modified NC (m-NC) were characterized using MR and Raman spectroscopy; and by determination of acid, iodine and ester values. Structural analysis of m-NC showed varieties of forms, from spongy to nanostructural non-uniform layered morphology with observable agglomeration, which confirmed morphology dependence on modification/processing methods Thermogravimetry-MS spectrometry showed different thermal stability and degradation pathways of NC/m-NC. Incorporation of 1 wt% of reactive m-NC in unsaturated polyester lead to high performance nanocomposites and contributed to increase of stress at break in the range from 76 to 93%.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Carbohydrate Polymers",
title = "Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites",
pages = "74-64",
volume = "164",
doi = "10.1016/j.carbpol.2017.01.086"
}
Rusmirović, J. D., Ivanović, J. Z., Pavlović, V., Rakić, V., Rancić, M. P., Djokić, V.,& Marinković, A. D.. (2017). Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites. in Carbohydrate Polymers
Elsevier Sci Ltd, Oxford., 164, 64-74.
https://doi.org/10.1016/j.carbpol.2017.01.086
Rusmirović JD, Ivanović JZ, Pavlović V, Rakić V, Rancić MP, Djokić V, Marinković AD. Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites. in Carbohydrate Polymers. 2017;164:64-74.
doi:10.1016/j.carbpol.2017.01.086 .
Rusmirović, Jelena D., Ivanović, Jasna Z., Pavlović, Vladimir, Rakić, Vesna, Rancić, Milica P., Djokić, Veljko, Marinković, Aleksandar D., "Novel modified nanocellulose applicable as reinforcement in high-performance nanocomposites" in Carbohydrate Polymers, 164 (2017):64-74,
https://doi.org/10.1016/j.carbpol.2017.01.086 . .
34
19
35

Efficient As(V) removal by alpha-FeOOH and alpha-FeOOH/alpha-MnO2 embedded PEG-6-arm functionalized multiwall carbon nanotubes

Budimirović, Dragoslav; Velicković, Zlate; Djokić, Veljko; Milosauljević, Milutin; Markovski, Jasmina; Lević, Steva; Marinković, Aleksandar D.

(Inst Chemical Engineers, Rugby, 2017)

TY  - JOUR
AU  - Budimirović, Dragoslav
AU  - Velicković, Zlate
AU  - Djokić, Veljko
AU  - Milosauljević, Milutin
AU  - Markovski, Jasmina
AU  - Lević, Steva
AU  - Marinković, Aleksandar D.
PY  - 2017
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/4385
AB  - A novel adsorbents, 6-arm amino polyethylene glycol functionalized multiwall carbon nanotubes (PEG/MWCNT) loaded with alpha-FeOOH (Fe/PEG/MWCNT), and hybrid alpha-FeOOH/alpha-MnO2 nano-deposit (Fe-Mn/PEG/MWCNT) were used for As(V) removal. In a batch test, the influence of pH, contact time, initial ion concentration and temperature on adsorption efficiency was studied. Time-dependent adsorption was best described by pseudo-second-order kinetic model and Weber-Morris model which predicted intra-particle diffusion as a rate controlling step of overall process. Competitive kinetic study in the presence of interfering ions shows low detrimental effect on both capacity and kinetic of As(V) removal. Thermodynamic parameters showed that the adsorption was spontaneous and endothermic processes. Influences of the pH, iron oxide loading and interfering ions were modeled by using Visual MINTEQ software. High adsorption capacities: 49.39 and 59.78 mg g(-1) were obtained for Fe/- and Fe-Mn/PEG/MWCNT, respectively, and multi-cycle reusability indicated high applicability of obtained material. Two step removal process, in a batch study, was successfully performed by using PEG/MWCNT for cations removal in the first step, and Fe or Fe-Mn/PEG/MWCNT for As(V) removal in the second.
PB  - Inst Chemical Engineers, Rugby
T2  - Chemical Engineering Research & Design
T1  - Efficient As(V) removal by alpha-FeOOH and alpha-FeOOH/alpha-MnO2 embedded PEG-6-arm functionalized multiwall carbon nanotubes
EP  - 86
SP  - 75
VL  - 119
DO  - 10.1016/j.cherd.2017.01.010
ER  - 
@article{
author = "Budimirović, Dragoslav and Velicković, Zlate and Djokić, Veljko and Milosauljević, Milutin and Markovski, Jasmina and Lević, Steva and Marinković, Aleksandar D.",
year = "2017",
abstract = "A novel adsorbents, 6-arm amino polyethylene glycol functionalized multiwall carbon nanotubes (PEG/MWCNT) loaded with alpha-FeOOH (Fe/PEG/MWCNT), and hybrid alpha-FeOOH/alpha-MnO2 nano-deposit (Fe-Mn/PEG/MWCNT) were used for As(V) removal. In a batch test, the influence of pH, contact time, initial ion concentration and temperature on adsorption efficiency was studied. Time-dependent adsorption was best described by pseudo-second-order kinetic model and Weber-Morris model which predicted intra-particle diffusion as a rate controlling step of overall process. Competitive kinetic study in the presence of interfering ions shows low detrimental effect on both capacity and kinetic of As(V) removal. Thermodynamic parameters showed that the adsorption was spontaneous and endothermic processes. Influences of the pH, iron oxide loading and interfering ions were modeled by using Visual MINTEQ software. High adsorption capacities: 49.39 and 59.78 mg g(-1) were obtained for Fe/- and Fe-Mn/PEG/MWCNT, respectively, and multi-cycle reusability indicated high applicability of obtained material. Two step removal process, in a batch study, was successfully performed by using PEG/MWCNT for cations removal in the first step, and Fe or Fe-Mn/PEG/MWCNT for As(V) removal in the second.",
publisher = "Inst Chemical Engineers, Rugby",
journal = "Chemical Engineering Research & Design",
title = "Efficient As(V) removal by alpha-FeOOH and alpha-FeOOH/alpha-MnO2 embedded PEG-6-arm functionalized multiwall carbon nanotubes",
pages = "86-75",
volume = "119",
doi = "10.1016/j.cherd.2017.01.010"
}
Budimirović, D., Velicković, Z., Djokić, V., Milosauljević, M., Markovski, J., Lević, S.,& Marinković, A. D.. (2017). Efficient As(V) removal by alpha-FeOOH and alpha-FeOOH/alpha-MnO2 embedded PEG-6-arm functionalized multiwall carbon nanotubes. in Chemical Engineering Research & Design
Inst Chemical Engineers, Rugby., 119, 75-86.
https://doi.org/10.1016/j.cherd.2017.01.010
Budimirović D, Velicković Z, Djokić V, Milosauljević M, Markovski J, Lević S, Marinković AD. Efficient As(V) removal by alpha-FeOOH and alpha-FeOOH/alpha-MnO2 embedded PEG-6-arm functionalized multiwall carbon nanotubes. in Chemical Engineering Research & Design. 2017;119:75-86.
doi:10.1016/j.cherd.2017.01.010 .
Budimirović, Dragoslav, Velicković, Zlate, Djokić, Veljko, Milosauljević, Milutin, Markovski, Jasmina, Lević, Steva, Marinković, Aleksandar D., "Efficient As(V) removal by alpha-FeOOH and alpha-FeOOH/alpha-MnO2 embedded PEG-6-arm functionalized multiwall carbon nanotubes" in Chemical Engineering Research & Design, 119 (2017):75-86,
https://doi.org/10.1016/j.cherd.2017.01.010 . .
39
34
44