TY  - JOUR
AU  - Šuljagić, Marija
AU  - Kremenović, Aleksandar
AU  - Petronijević, Ivan
AU  - Džunuzović, Adis
AU  - Mirković, Miljana
AU  - Pavlović, Vladimir
AU  - Anđelković, Ljubica
PY  - 2023
UR  - https://doiserbia.nb.rs/Article.aspx?id=0350-820X2300013S
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/6466
AB  - To investigate the effect of synthesis procedure and sintering temperature on the functional properties of perovskite/spinel ceramics, BaTiO3/CoFe2O4 composites were prepared by thermal decomposition, coprecipitation, and microemulsion method, and sintered at 1150°C and 1300°C. The phase composition and morphology of as-prepared powders as well as sintered ceramics were thoroughly examined by X-ray powder diffraction (XRPD) and scanning electron microscopy (SEM) coupled with electron dispersive spectroscopy (EDS). The dielectric and ferroelectric measurements were performed in detail. Generally, the samples sintered at 1300°C had better performances than those sintered at 1150°C. The composite synthesized by thermal decomposition and sintered at 1300°C stands out among other prepared BaTiO3/CoFe2O4 ceramics, owing to high stability in the wide frequency range and low leakage currents. The obtained results indicate that such composite might be successfully applied as a functional multiferroic.
T2  - Science of Sintering
T2  - Science of Sintering
T1  - Understanding the effect of synthesis and sintering temperature on the functional properties of barium titanate/cobalt ferrite composites
EP  - 381
IS  - 3
SP  - 367
VL  - 55
DO  - 10.2298/SOS220512013S
ER  - 

@article{
author = "Šuljagić, Marija and Kremenović, Aleksandar and Petronijević, Ivan and Džunuzović, Adis and Mirković, Miljana and Pavlović, Vladimir and Anđelković, Ljubica",
year = "2023",
abstract = "To investigate the effect of synthesis procedure and sintering temperature on the functional properties of perovskite/spinel ceramics, BaTiO3/CoFe2O4 composites were prepared by thermal decomposition, coprecipitation, and microemulsion method, and sintered at 1150°C and 1300°C. The phase composition and morphology of as-prepared powders as well as sintered ceramics were thoroughly examined by X-ray powder diffraction (XRPD) and scanning electron microscopy (SEM) coupled with electron dispersive spectroscopy (EDS). The dielectric and ferroelectric measurements were performed in detail. Generally, the samples sintered at 1300°C had better performances than those sintered at 1150°C. The composite synthesized by thermal decomposition and sintered at 1300°C stands out among other prepared BaTiO3/CoFe2O4 ceramics, owing to high stability in the wide frequency range and low leakage currents. The obtained results indicate that such composite might be successfully applied as a functional multiferroic.",
journal = "Science of Sintering, Science of Sintering",
title = "Understanding the effect of synthesis and sintering temperature on the functional properties of barium titanate/cobalt ferrite composites",
pages = "381-367",
number = "3",
volume = "55",
doi = "10.2298/SOS220512013S"
}

Šuljagić, M., Kremenović, A., Petronijević, I., Džunuzović, A., Mirković, M., Pavlović, V.,& Anđelković, L.. (2023). Understanding the effect of synthesis and sintering temperature on the functional properties of barium titanate/cobalt ferrite composites. in Science of Sintering, 55(3), 367-381.
https://doi.org/10.2298/SOS220512013S

Šuljagić M, Kremenović A, Petronijević I, Džunuzović A, Mirković M, Pavlović V, Anđelković L. Understanding the effect of synthesis and sintering temperature on the functional properties of barium titanate/cobalt ferrite composites. in Science of Sintering. 2023;55(3):367-381.
doi:10.2298/SOS220512013S .

Šuljagić, Marija, Kremenović, Aleksandar, Petronijević, Ivan, Džunuzović, Adis, Mirković, Miljana, Pavlović, Vladimir, Anđelković, Ljubica, "Understanding the effect of synthesis and sintering temperature on the functional properties of barium titanate/cobalt ferrite composites" in Science of Sintering, 55, no. 3 (2023):367-381,
https://doi.org/10.2298/SOS220512013S . .

TY  - JOUR
AU  - Šuljagić, Marija
AU  - Vulić, Predrag
AU  - Jeremić, Dejan
AU  - Pavlović, Vladimir
AU  - Filipović, Suzana
AU  - Kilanski, Lukasz
AU  - Lewinska, Sabina
AU  - Slawska-Waniewska, Anna
AU  - Milenković, Milica
AU  - Nikolić, Aleksandar S.
AU  - Anđelković, Ljubica
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/9515
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5759
AB  - To investigate the magnetic behavior of starch-coated cobalt ferrites, well-established synthetic methods, i.e., coprecipitation, mechanochemical, ultrasonically assisted coprecipitation, microemulsion, and microwave-assisted hydrothermal syntheses were chosen for their preparation. The obtained materials had pure single-phase spinel structures. Scanning and transmission electron microscopy analyses revealed that the morphology of the samples is not uniform, and particle aggregation is a dominant process. Fourier transform infrared spectra and thermogravimetric analysis confirmed the presence of starch in all–coated samples. The unusually higher saturation magnetization of starch-coated samples than their as-prepared analogs, obtained by coprecipitation, ultrasonically assisted coprecipitation, and microwave-assisted hydrothermal methods, might be explained by the Ostwald ripening mechanism induced by the coating process. A decrease in magnetization was noticed for the starch-functionalized nanomaterials synthesized by mechanochemical and microemulsion methods, in comparison to their as-prepared analogs, i.e., the size distribution of such nanoparticles is narrow, and the average diameter of the grains is near critical for the Ostwald ripening process.
PB  - Elsevier
T2  - Materials Research Bulletin
T1  - The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods
SP  - 111117
VL  - 134
DO  - 10.1016/j.materresbull.2020.111117
ER  - 

@article{
author = "Šuljagić, Marija and Vulić, Predrag and Jeremić, Dejan and Pavlović, Vladimir and Filipović, Suzana and Kilanski, Lukasz and Lewinska, Sabina and Slawska-Waniewska, Anna and Milenković, Milica and Nikolić, Aleksandar S. and Anđelković, Ljubica",
year = "2021",
abstract = "To investigate the magnetic behavior of starch-coated cobalt ferrites, well-established synthetic methods, i.e., coprecipitation, mechanochemical, ultrasonically assisted coprecipitation, microemulsion, and microwave-assisted hydrothermal syntheses were chosen for their preparation. The obtained materials had pure single-phase spinel structures. Scanning and transmission electron microscopy analyses revealed that the morphology of the samples is not uniform, and particle aggregation is a dominant process. Fourier transform infrared spectra and thermogravimetric analysis confirmed the presence of starch in all–coated samples. The unusually higher saturation magnetization of starch-coated samples than their as-prepared analogs, obtained by coprecipitation, ultrasonically assisted coprecipitation, and microwave-assisted hydrothermal methods, might be explained by the Ostwald ripening mechanism induced by the coating process. A decrease in magnetization was noticed for the starch-functionalized nanomaterials synthesized by mechanochemical and microemulsion methods, in comparison to their as-prepared analogs, i.e., the size distribution of such nanoparticles is narrow, and the average diameter of the grains is near critical for the Ostwald ripening process.",
publisher = "Elsevier",
journal = "Materials Research Bulletin",
title = "The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods",
pages = "111117",
volume = "134",
doi = "10.1016/j.materresbull.2020.111117"
}

Šuljagić, M., Vulić, P., Jeremić, D., Pavlović, V., Filipović, S., Kilanski, L., Lewinska, S., Slawska-Waniewska, A., Milenković, M., Nikolić, A. S.,& Anđelković, L.. (2021). The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods. in Materials Research Bulletin
Elsevier., 134, 111117.
https://doi.org/10.1016/j.materresbull.2020.111117

Šuljagić M, Vulić P, Jeremić D, Pavlović V, Filipović S, Kilanski L, Lewinska S, Slawska-Waniewska A, Milenković M, Nikolić AS, Anđelković L. The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods. in Materials Research Bulletin. 2021;134:111117.
doi:10.1016/j.materresbull.2020.111117 .

Šuljagić, Marija, Vulić, Predrag, Jeremić, Dejan, Pavlović, Vladimir, Filipović, Suzana, Kilanski, Lukasz, Lewinska, Sabina, Slawska-Waniewska, Anna, Milenković, Milica, Nikolić, Aleksandar S., Anđelković, Ljubica, "The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods" in Materials Research Bulletin, 134 (2021):111117,
https://doi.org/10.1016/j.materresbull.2020.111117 . .

TY  - JOUR
AU  - Šuljagić, Marija
AU  - Vulić, Predrag
AU  - Jeremić, Dejan
AU  - Pavlović, Vladimir
AU  - Filipović, Suzana
AU  - Kilanski, Lukasz
AU  - Lewinska, Sabina
AU  - Slawska-Waniewska, Anna
AU  - Milenković, Milica
AU  - Nikolić, Aleksandar S.
AU  - Anđelković, Ljubica
PY  - 2021
UR  - https://dais.sanu.ac.rs/123456789/9514
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/5758
AB  - To investigate the magnetic behavior of starch-coated cobalt ferrites, well-established synthetic methods, i.e., coprecipitation, mechanochemical, ultrasonically assisted coprecipitation, microemulsion, and microwave-assisted hydrothermal syntheses were chosen for their preparation. The obtained materials had pure single-phase spinel structures. Scanning and transmission electron microscopy analyses revealed that the morphology of the samples is not uniform, and particle aggregation is a dominant process. Fourier transform infrared spectra and thermogravimetric analysis confirmed the presence of starch in all–coated samples. The unusually higher saturation magnetization of starch-coated samples than their as-prepared analogs, obtained by coprecipitation, ultrasonically assisted coprecipitation, and microwave-assisted hydrothermal methods, might be explained by the Ostwald ripening mechanism induced by the coating process. A decrease in magnetization was noticed for the starch-functionalized nanomaterials synthesized by mechanochemical and microemulsion methods, in comparison to their as-prepared analogs, i.e., the size distribution of such nanoparticles is narrow, and the average diameter of the grains is near critical for the Ostwald ripening process.
PB  - Elsevier
T2  - Materials Research Bulletin
T1  - The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods
SP  - 111117
VL  - 134
DO  - 10.1016/j.materresbull.2020.111117
ER  - 

@article{
author = "Šuljagić, Marija and Vulić, Predrag and Jeremić, Dejan and Pavlović, Vladimir and Filipović, Suzana and Kilanski, Lukasz and Lewinska, Sabina and Slawska-Waniewska, Anna and Milenković, Milica and Nikolić, Aleksandar S. and Anđelković, Ljubica",
year = "2021",
abstract = "To investigate the magnetic behavior of starch-coated cobalt ferrites, well-established synthetic methods, i.e., coprecipitation, mechanochemical, ultrasonically assisted coprecipitation, microemulsion, and microwave-assisted hydrothermal syntheses were chosen for their preparation. The obtained materials had pure single-phase spinel structures. Scanning and transmission electron microscopy analyses revealed that the morphology of the samples is not uniform, and particle aggregation is a dominant process. Fourier transform infrared spectra and thermogravimetric analysis confirmed the presence of starch in all–coated samples. The unusually higher saturation magnetization of starch-coated samples than their as-prepared analogs, obtained by coprecipitation, ultrasonically assisted coprecipitation, and microwave-assisted hydrothermal methods, might be explained by the Ostwald ripening mechanism induced by the coating process. A decrease in magnetization was noticed for the starch-functionalized nanomaterials synthesized by mechanochemical and microemulsion methods, in comparison to their as-prepared analogs, i.e., the size distribution of such nanoparticles is narrow, and the average diameter of the grains is near critical for the Ostwald ripening process.",
publisher = "Elsevier",
journal = "Materials Research Bulletin",
title = "The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods",
pages = "111117",
volume = "134",
doi = "10.1016/j.materresbull.2020.111117"
}

Šuljagić, M., Vulić, P., Jeremić, D., Pavlović, V., Filipović, S., Kilanski, L., Lewinska, S., Slawska-Waniewska, A., Milenković, M., Nikolić, A. S.,& Anđelković, L.. (2021). The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods. in Materials Research Bulletin
Elsevier., 134, 111117.
https://doi.org/10.1016/j.materresbull.2020.111117

Šuljagić M, Vulić P, Jeremić D, Pavlović V, Filipović S, Kilanski L, Lewinska S, Slawska-Waniewska A, Milenković M, Nikolić AS, Anđelković L. The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods. in Materials Research Bulletin. 2021;134:111117.
doi:10.1016/j.materresbull.2020.111117 .

Šuljagić, Marija, Vulić, Predrag, Jeremić, Dejan, Pavlović, Vladimir, Filipović, Suzana, Kilanski, Lukasz, Lewinska, Sabina, Slawska-Waniewska, Anna, Milenković, Milica, Nikolić, Aleksandar S., Anđelković, Ljubica, "The influence of the starch coating on the magnetic properties of nanosized cobalt ferrites obtained by different synthetic methods" in Materials Research Bulletin, 134 (2021):111117,
https://doi.org/10.1016/j.materresbull.2020.111117 . .