TY  - JOUR
AU  - Kosanović, Darko
AU  - Obradović, N.
AU  - Pavlović, Vera P.
AU  - Marković, S.
AU  - Maricić, A.
AU  - Rasić, G.
AU  - Vlahović, Branislav
AU  - Pavlović, Vladimir
AU  - Ristić, M.M.
PY  - 2016
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/4010
AB  - Crystal structure and morphology of mechanically activated nanocrystalline Fe/BaTiO3 was investigated using a combination of spectroscopic and microscopic methods. These show that mechanical activation led to the creation of new surfaces and the comminution of the initial powder particles. Prolonged milling resulted in formation of larger agglomerates of BaTiO3 and bimodal particle size distribution, where BaTiO3 particles were significantly larger than those of iron-containing phases. Milling times of 210 min and above lead to a significant decrease in temperature of the oxidation of iron in the sample, indicating abrupt change in reactivity. Raman spectroscopy analysis has revealed that activation had a pronounced influence on Fe/BaTiO3 lattice, thereby affecting both the stability of the crystal structure and the phase transition phenomena.
PB  - Elsevier, Amsterdam
T2  - Materials Science and Engineering B-Advanced Functional Solid-State Materials
T1  - The influence of mechanical activation on the morphological changes of Fe/BaTiO3 powder
EP  - 95
SP  - 89
VL  - 212
DO  - 10.1016/j.mseb.2016.07.016
ER  - 

@article{
author = "Kosanović, Darko and Obradović, N. and Pavlović, Vera P. and Marković, S. and Maricić, A. and Rasić, G. and Vlahović, Branislav and Pavlović, Vladimir and Ristić, M.M.",
year = "2016",
abstract = "Crystal structure and morphology of mechanically activated nanocrystalline Fe/BaTiO3 was investigated using a combination of spectroscopic and microscopic methods. These show that mechanical activation led to the creation of new surfaces and the comminution of the initial powder particles. Prolonged milling resulted in formation of larger agglomerates of BaTiO3 and bimodal particle size distribution, where BaTiO3 particles were significantly larger than those of iron-containing phases. Milling times of 210 min and above lead to a significant decrease in temperature of the oxidation of iron in the sample, indicating abrupt change in reactivity. Raman spectroscopy analysis has revealed that activation had a pronounced influence on Fe/BaTiO3 lattice, thereby affecting both the stability of the crystal structure and the phase transition phenomena.",
publisher = "Elsevier, Amsterdam",
journal = "Materials Science and Engineering B-Advanced Functional Solid-State Materials",
title = "The influence of mechanical activation on the morphological changes of Fe/BaTiO3 powder",
pages = "95-89",
volume = "212",
doi = "10.1016/j.mseb.2016.07.016"
}

Kosanović, D., Obradović, N., Pavlović, V. P., Marković, S., Maricić, A., Rasić, G., Vlahović, B., Pavlović, V.,& Ristić, M.M.. (2016). The influence of mechanical activation on the morphological changes of Fe/BaTiO3 powder. in Materials Science and Engineering B-Advanced Functional Solid-State Materials
Elsevier, Amsterdam., 212, 89-95.
https://doi.org/10.1016/j.mseb.2016.07.016

Kosanović D, Obradović N, Pavlović VP, Marković S, Maricić A, Rasić G, Vlahović B, Pavlović V, Ristić M. The influence of mechanical activation on the morphological changes of Fe/BaTiO3 powder. in Materials Science and Engineering B-Advanced Functional Solid-State Materials. 2016;212:89-95.
doi:10.1016/j.mseb.2016.07.016 .

Kosanović, Darko, Obradović, N., Pavlović, Vera P., Marković, S., Maricić, A., Rasić, G., Vlahović, Branislav, Pavlović, Vladimir, Ristić, M.M., "The influence of mechanical activation on the morphological changes of Fe/BaTiO3 powder" in Materials Science and Engineering B-Advanced Functional Solid-State Materials, 212 (2016):89-95,
https://doi.org/10.1016/j.mseb.2016.07.016 . .

TY  - JOUR
AU  - Peles, A.
AU  - Pavlović, Vera P.
AU  - Filipović, Suzana
AU  - Obradović, N.
AU  - Mancić, L.
AU  - Krstić, J.
AU  - Mitrić, M.
AU  - Vlahović, Branislav
AU  - Rasić, G.
AU  - Kosanović, Darko
AU  - Pavlović, Vladimir
PY  - 2015
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/3691
AB  - Commercially available ZnO powder was mechanically activated in a planetary ball mill. In order to investigate the specific surface area, pore volume and microstructure of non-activated and mechanically activated ZnO powders the authors performed N-2 physisorption, SEM and TEM. Crystallite size and lattice microstrain were analyzed by X-ray diffraction method. XRD patterns indicate that peak intensities are getting lower and expend with activation time. The reduction in crystallite size and increasing of lattice microstrain with prolonged milling time were determined applying the Rietveld's method. The difference between non-activated and the activated powder has been also observed by X-ray photoelectron spectroscopy (XPS). XPS is used for investigating the chemical bonding of ZnO powder by analyzing the energy of photoelectrons. The lattice vibration spectra were obtained using Raman spectroscopy. In Raman spectra some changes along with atypical resonant scattering were noticed, which were caused by mechanical activation.
PB  - Elsevier Science Sa, Lausanne
T2  - Journal of Alloys and Compounds
T1  - Structural investigation of mechanically activated ZnO powder
EP  - 979
SP  - 971
VL  - 648
DO  - 10.1016/j.jallcom.2015.06.247
ER  - 

@article{
author = "Peles, A. and Pavlović, Vera P. and Filipović, Suzana and Obradović, N. and Mancić, L. and Krstić, J. and Mitrić, M. and Vlahović, Branislav and Rasić, G. and Kosanović, Darko and Pavlović, Vladimir",
year = "2015",
abstract = "Commercially available ZnO powder was mechanically activated in a planetary ball mill. In order to investigate the specific surface area, pore volume and microstructure of non-activated and mechanically activated ZnO powders the authors performed N-2 physisorption, SEM and TEM. Crystallite size and lattice microstrain were analyzed by X-ray diffraction method. XRD patterns indicate that peak intensities are getting lower and expend with activation time. The reduction in crystallite size and increasing of lattice microstrain with prolonged milling time were determined applying the Rietveld's method. The difference between non-activated and the activated powder has been also observed by X-ray photoelectron spectroscopy (XPS). XPS is used for investigating the chemical bonding of ZnO powder by analyzing the energy of photoelectrons. The lattice vibration spectra were obtained using Raman spectroscopy. In Raman spectra some changes along with atypical resonant scattering were noticed, which were caused by mechanical activation.",
publisher = "Elsevier Science Sa, Lausanne",
journal = "Journal of Alloys and Compounds",
title = "Structural investigation of mechanically activated ZnO powder",
pages = "979-971",
volume = "648",
doi = "10.1016/j.jallcom.2015.06.247"
}

Peles, A., Pavlović, V. P., Filipović, S., Obradović, N., Mancić, L., Krstić, J., Mitrić, M., Vlahović, B., Rasić, G., Kosanović, D.,& Pavlović, V.. (2015). Structural investigation of mechanically activated ZnO powder. in Journal of Alloys and Compounds
Elsevier Science Sa, Lausanne., 648, 971-979.
https://doi.org/10.1016/j.jallcom.2015.06.247

Peles A, Pavlović VP, Filipović S, Obradović N, Mancić L, Krstić J, Mitrić M, Vlahović B, Rasić G, Kosanović D, Pavlović V. Structural investigation of mechanically activated ZnO powder. in Journal of Alloys and Compounds. 2015;648:971-979.
doi:10.1016/j.jallcom.2015.06.247 .

Peles, A., Pavlović, Vera P., Filipović, Suzana, Obradović, N., Mancić, L., Krstić, J., Mitrić, M., Vlahović, Branislav, Rasić, G., Kosanović, Darko, Pavlović, Vladimir, "Structural investigation of mechanically activated ZnO powder" in Journal of Alloys and Compounds, 648 (2015):971-979,
https://doi.org/10.1016/j.jallcom.2015.06.247 . .

TY  - JOUR
AU  - Kosanović, Darko
AU  - Zivojinović, J.
AU  - Obradović, N.
AU  - Pavlović, Vera P.
AU  - Pavlović, Vladimir
AU  - Peles, A.
AU  - Ristić, M.M.
PY  - 2014
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/3418
AB  - Ferroelectric barium strontium titanate (Ba0.77Sr0.23TiO3), BST, was prepared by solid-state reactions using as the starting compounds powder of barium carbonate (BaCO3), strontium carbonate (SrCO3) and titanium dioxide (TiO2 anatase). Non-activated mixtures and mixtures mechanically activated in a high-energy planetary ball mill (0, 5, 10, 20, 40, 80 and 120 min) were sintered at 1100, 1200, 1300 and 1400 degrees C for 2 h in air atmosphere. Defects and the effect of the beginning of the sintering process on the microstructure were investigated by scanning electron microscopy (SEM). Electrical measurements (loss tangent and resistivity as the function of frequency X-C =f(log nu)) were performed for ceramics sintered at 1400 degrees C for 2 h. It has been found that mechanical activation can reduce the sintering temperature by around 100 degrees C, which leads to significant energy savings. Furthermore, activated for 80 min and sintered at. 1400 degrees C for 2 h exhibit the largest density values and have about 36% lower dielectric loss at a frequency of 1 kHz and about 57% at a frequency of 10 kHz than the samples obtained from the initial non-activated powder sintered under the same conditions.
PB  - Elsevier Sci Ltd, Oxford
T2  - Ceramics International
T1  - The influence of mechanical activation on the electrical properties of Ba0.77Sr0.23TiO3 ceramics
EP  - 11888
IS  - 8
SP  - 11883
VL  - 40
DO  - 10.1016/j.ceramint.2014.04.023
ER  - 

@article{
author = "Kosanović, Darko and Zivojinović, J. and Obradović, N. and Pavlović, Vera P. and Pavlović, Vladimir and Peles, A. and Ristić, M.M.",
year = "2014",
abstract = "Ferroelectric barium strontium titanate (Ba0.77Sr0.23TiO3), BST, was prepared by solid-state reactions using as the starting compounds powder of barium carbonate (BaCO3), strontium carbonate (SrCO3) and titanium dioxide (TiO2 anatase). Non-activated mixtures and mixtures mechanically activated in a high-energy planetary ball mill (0, 5, 10, 20, 40, 80 and 120 min) were sintered at 1100, 1200, 1300 and 1400 degrees C for 2 h in air atmosphere. Defects and the effect of the beginning of the sintering process on the microstructure were investigated by scanning electron microscopy (SEM). Electrical measurements (loss tangent and resistivity as the function of frequency X-C =f(log nu)) were performed for ceramics sintered at 1400 degrees C for 2 h. It has been found that mechanical activation can reduce the sintering temperature by around 100 degrees C, which leads to significant energy savings. Furthermore, activated for 80 min and sintered at. 1400 degrees C for 2 h exhibit the largest density values and have about 36% lower dielectric loss at a frequency of 1 kHz and about 57% at a frequency of 10 kHz than the samples obtained from the initial non-activated powder sintered under the same conditions.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Ceramics International",
title = "The influence of mechanical activation on the electrical properties of Ba0.77Sr0.23TiO3 ceramics",
pages = "11888-11883",
number = "8",
volume = "40",
doi = "10.1016/j.ceramint.2014.04.023"
}

Kosanović, D., Zivojinović, J., Obradović, N., Pavlović, V. P., Pavlović, V., Peles, A.,& Ristić, M.M.. (2014). The influence of mechanical activation on the electrical properties of Ba0.77Sr0.23TiO3 ceramics. in Ceramics International
Elsevier Sci Ltd, Oxford., 40(8), 11883-11888.
https://doi.org/10.1016/j.ceramint.2014.04.023

Kosanović D, Zivojinović J, Obradović N, Pavlović VP, Pavlović V, Peles A, Ristić M. The influence of mechanical activation on the electrical properties of Ba0.77Sr0.23TiO3 ceramics. in Ceramics International. 2014;40(8):11883-11888.
doi:10.1016/j.ceramint.2014.04.023 .

Kosanović, Darko, Zivojinović, J., Obradović, N., Pavlović, Vera P., Pavlović, Vladimir, Peles, A., Ristić, M.M., "The influence of mechanical activation on the electrical properties of Ba0.77Sr0.23TiO3 ceramics" in Ceramics International, 40, no. 8 (2014):11883-11888,
https://doi.org/10.1016/j.ceramint.2014.04.023 . .

TY  - CONF
AU  - Pavlović, Vera P.
AU  - Pavlović, Vladimir
AU  - Vlahović, Branislav
AU  - Božanić, D.K.
AU  - Pajović, Jelena D.
AU  - Dojčilović, Radovan
AU  - Djoković, Vladimir
PY  - 2013
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/3112
AB  - Nanocomposites of electroactive ceramics and ferroelectric polymers exploit favorable features of the matrix polymer and the nanostructured filler to produce new functional materials for pressure and IR sensors. In this study, the influence of mechanical activation of barium titanate (BaTiO3) particles on the structural properties of BaTiO3/polyvinylidene fluoride (PVDF) nanocomposites was investigated. Nanocomposite films were prepared by the solution casting method and characterized by scanning electron microscopy, x-ray diffraction and Raman spectroscopy. It was found that mechanically activated fillers promote the formation of a ferroelectric beta-phase during crystallization of PVDF.
PB  - IOP Publishing Ltd, Bristol
C3  - Physica Scripta
T1  - Structural properties of composites of polyvinylidene fluoride and mechanically activated BaTiO3 particles
VL  - T157
DO  - 10.1088/0031-8949/2013/T157/014006
ER  - 

@conference{
author = "Pavlović, Vera P. and Pavlović, Vladimir and Vlahović, Branislav and Božanić, D.K. and Pajović, Jelena D. and Dojčilović, Radovan and Djoković, Vladimir",
year = "2013",
abstract = "Nanocomposites of electroactive ceramics and ferroelectric polymers exploit favorable features of the matrix polymer and the nanostructured filler to produce new functional materials for pressure and IR sensors. In this study, the influence of mechanical activation of barium titanate (BaTiO3) particles on the structural properties of BaTiO3/polyvinylidene fluoride (PVDF) nanocomposites was investigated. Nanocomposite films were prepared by the solution casting method and characterized by scanning electron microscopy, x-ray diffraction and Raman spectroscopy. It was found that mechanically activated fillers promote the formation of a ferroelectric beta-phase during crystallization of PVDF.",
publisher = "IOP Publishing Ltd, Bristol",
journal = "Physica Scripta",
title = "Structural properties of composites of polyvinylidene fluoride and mechanically activated BaTiO3 particles",
volume = "T157",
doi = "10.1088/0031-8949/2013/T157/014006"
}

Pavlović, V. P., Pavlović, V., Vlahović, B., Božanić, D.K., Pajović, J. D., Dojčilović, R.,& Djoković, V.. (2013). Structural properties of composites of polyvinylidene fluoride and mechanically activated BaTiO3 particles. in Physica Scripta
IOP Publishing Ltd, Bristol., T157.
https://doi.org/10.1088/0031-8949/2013/T157/014006

Pavlović VP, Pavlović V, Vlahović B, Božanić D, Pajović JD, Dojčilović R, Djoković V. Structural properties of composites of polyvinylidene fluoride and mechanically activated BaTiO3 particles. in Physica Scripta. 2013;T157.
doi:10.1088/0031-8949/2013/T157/014006 .

Pavlović, Vera P., Pavlović, Vladimir, Vlahović, Branislav, Božanić, D.K., Pajović, Jelena D., Dojčilović, Radovan, Djoković, Vladimir, "Structural properties of composites of polyvinylidene fluoride and mechanically activated BaTiO3 particles" in Physica Scripta, T157 (2013),
https://doi.org/10.1088/0031-8949/2013/T157/014006 . .

TY  - JOUR
AU  - Kosanović, Darko
AU  - Obradović, N.
AU  - Zivojinović, J.
AU  - Maricić, A.
AU  - Pavlović, Vera P.
AU  - Pavlović, Vladimir
AU  - Ristić, M.M.
PY  - 2012
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/3050
AB  - In this article the influence of mechanical activation on sintering process of barium-strontium-titanate ceramics has been investigated. Both non-activated and mixtures treated in a planetary ball mill for 5, 10, 20, 40, 80 and 120 minutes were sintered at 1100-1400 degrees C for 2 hours in presence of air atmosphere. The influence of mechanical activation on phase composition and crystal structure has been analyzed by XRD, while the effect of activation and sintering process on microstructure was investigated by scanning electron microscopy. It has been established that temperature of 1100 degrees C was too low to induce final sintering stage for this system. Electrical measurements have been conducted for the densest ceramics sintered at 1400 degrees C for 2 hours.
PB  - Međunarodni Institut za nauku o sinterovanju, Beograd
T2  - Science of Sintering
T1  - The Influence of Mechanical Activation on Sintering Process of BaCO3-SrCO3-TiO2 System
EP  - 280
IS  - 3
SP  - 271
VL  - 44
DO  - 10.2298/SOS1203271K
ER  - 

@article{
author = "Kosanović, Darko and Obradović, N. and Zivojinović, J. and Maricić, A. and Pavlović, Vera P. and Pavlović, Vladimir and Ristić, M.M.",
year = "2012",
abstract = "In this article the influence of mechanical activation on sintering process of barium-strontium-titanate ceramics has been investigated. Both non-activated and mixtures treated in a planetary ball mill for 5, 10, 20, 40, 80 and 120 minutes were sintered at 1100-1400 degrees C for 2 hours in presence of air atmosphere. The influence of mechanical activation on phase composition and crystal structure has been analyzed by XRD, while the effect of activation and sintering process on microstructure was investigated by scanning electron microscopy. It has been established that temperature of 1100 degrees C was too low to induce final sintering stage for this system. Electrical measurements have been conducted for the densest ceramics sintered at 1400 degrees C for 2 hours.",
publisher = "Međunarodni Institut za nauku o sinterovanju, Beograd",
journal = "Science of Sintering",
title = "The Influence of Mechanical Activation on Sintering Process of BaCO3-SrCO3-TiO2 System",
pages = "280-271",
number = "3",
volume = "44",
doi = "10.2298/SOS1203271K"
}

Kosanović, D., Obradović, N., Zivojinović, J., Maricić, A., Pavlović, V. P., Pavlović, V.,& Ristić, M.M.. (2012). The Influence of Mechanical Activation on Sintering Process of BaCO3-SrCO3-TiO2 System. in Science of Sintering
Međunarodni Institut za nauku o sinterovanju, Beograd., 44(3), 271-280.
https://doi.org/10.2298/SOS1203271K

Kosanović D, Obradović N, Zivojinović J, Maricić A, Pavlović VP, Pavlović V, Ristić M. The Influence of Mechanical Activation on Sintering Process of BaCO3-SrCO3-TiO2 System. in Science of Sintering. 2012;44(3):271-280.
doi:10.2298/SOS1203271K .

Kosanović, Darko, Obradović, N., Zivojinović, J., Maricić, A., Pavlović, Vera P., Pavlović, Vladimir, Ristić, M.M., "The Influence of Mechanical Activation on Sintering Process of BaCO3-SrCO3-TiO2 System" in Science of Sintering, 44, no. 3 (2012):271-280,
https://doi.org/10.2298/SOS1203271K . .

TY  - JOUR
AU  - Pavlović, Vera P.
AU  - Krstić, J.
AU  - Scepanović, M.J.
AU  - Dojcilović, J.
AU  - Minić, Dragica M.
AU  - Blanusa, J.
AU  - Stevanović, S.
AU  - Mitić, V.
AU  - Pavlović, Vladimir
PY  - 2011
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/2668
AB  - In this article, in order to obtain tetragonal nanocrystalline BaTiO3, structural investigations of mechanically activated BaTiO3 powder have been performed. A mercury porosimetry analysis and scanning electron microscopy method have been applied for determination of the specific pore volume, porosity and microstructure morphology of the samples. The lattice vibration spectra of nonactivated and activated powders, their phase composition, lattice microstrains and the mean size of coherently diffracting domains were examined by Raman spectroscopy and the X-ray powder diffraction method. The average crystal structure of obtained nanocrystalline powders, estimated from X-ray diffraction data, gave evidence of retained, but slightly sustained tetragonality of powders, even for particles as small as similar to 30 nm. Raman spectroscopy also gave clear evidence for local tetragonal symmetries, in particular through the presence of a band at similar to 307 cm(-1).
PB  - Elsevier Sci Ltd, Oxford
T2  - Ceramics International
T1  - Structural investigation of mechanically activated nanocrystalline BaTiO3 powders
EP  - 2518
IS  - 7
SP  - 2513
VL  - 37
DO  - 10.1016/j.ceramint.2011.03.064
ER  - 

@article{
author = "Pavlović, Vera P. and Krstić, J. and Scepanović, M.J. and Dojcilović, J. and Minić, Dragica M. and Blanusa, J. and Stevanović, S. and Mitić, V. and Pavlović, Vladimir",
year = "2011",
abstract = "In this article, in order to obtain tetragonal nanocrystalline BaTiO3, structural investigations of mechanically activated BaTiO3 powder have been performed. A mercury porosimetry analysis and scanning electron microscopy method have been applied for determination of the specific pore volume, porosity and microstructure morphology of the samples. The lattice vibration spectra of nonactivated and activated powders, their phase composition, lattice microstrains and the mean size of coherently diffracting domains were examined by Raman spectroscopy and the X-ray powder diffraction method. The average crystal structure of obtained nanocrystalline powders, estimated from X-ray diffraction data, gave evidence of retained, but slightly sustained tetragonality of powders, even for particles as small as similar to 30 nm. Raman spectroscopy also gave clear evidence for local tetragonal symmetries, in particular through the presence of a band at similar to 307 cm(-1).",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Ceramics International",
title = "Structural investigation of mechanically activated nanocrystalline BaTiO3 powders",
pages = "2518-2513",
number = "7",
volume = "37",
doi = "10.1016/j.ceramint.2011.03.064"
}

Pavlović, V. P., Krstić, J., Scepanović, M.J., Dojcilović, J., Minić, D. M., Blanusa, J., Stevanović, S., Mitić, V.,& Pavlović, V.. (2011). Structural investigation of mechanically activated nanocrystalline BaTiO3 powders. in Ceramics International
Elsevier Sci Ltd, Oxford., 37(7), 2513-2518.
https://doi.org/10.1016/j.ceramint.2011.03.064

Pavlović VP, Krstić J, Scepanović M, Dojcilović J, Minić DM, Blanusa J, Stevanović S, Mitić V, Pavlović V. Structural investigation of mechanically activated nanocrystalline BaTiO3 powders. in Ceramics International. 2011;37(7):2513-2518.
doi:10.1016/j.ceramint.2011.03.064 .

Pavlović, Vera P., Krstić, J., Scepanović, M.J., Dojcilović, J., Minić, Dragica M., Blanusa, J., Stevanović, S., Mitić, V., Pavlović, Vladimir, "Structural investigation of mechanically activated nanocrystalline BaTiO3 powders" in Ceramics International, 37, no. 7 (2011):2513-2518,
https://doi.org/10.1016/j.ceramint.2011.03.064 . .

TY  - JOUR
AU  - Pavlović, Vera P.
AU  - Popović, D.
AU  - Krstić, J.
AU  - Dojcilović, J.
AU  - Babić, Biljana M.
AU  - Pavlović, Vladimir
PY  - 2009
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/2060
AB  - The influence of mechanical activation in a planetary ball mill on the change of the structure of BaTiO3 powders has been investigated. The particle size distribution of the nonactivated and activated samples was measured by a particle dimension laser analyzer. The mercury porosimetry method has been applied for determination of the surface area of the samples, bulk density, specific pore volumes, total porosity and the pore size distributions. Formation of paramagnetic centers and the change of the IR active modes was investigated by EPR and IR measurements. Semi-quantitative comparison of the BaCO3 and OH- group presence in IR spectra was calculated. The investigation showed that mechanical activation of BaTiO3 has a pronounced influence on the change of the powder particles structure and enables establishing the directions of possible BaTiO3 ceramics materials properties prognosis according to the synthesis-structure correlation.
PB  - Elsevier Science Sa, Lausanne
T2  - Journal of Alloys and Compounds
T1  - Influence of mechanical activation on the structure of ultrafine BaTiO3 powders
EP  - 639
IS  - 1-2
SP  - 633
VL  - 486
DO  - 10.1016/j.jallcom.2009.07.008
ER  - 

@article{
author = "Pavlović, Vera P. and Popović, D. and Krstić, J. and Dojcilović, J. and Babić, Biljana M. and Pavlović, Vladimir",
year = "2009",
abstract = "The influence of mechanical activation in a planetary ball mill on the change of the structure of BaTiO3 powders has been investigated. The particle size distribution of the nonactivated and activated samples was measured by a particle dimension laser analyzer. The mercury porosimetry method has been applied for determination of the surface area of the samples, bulk density, specific pore volumes, total porosity and the pore size distributions. Formation of paramagnetic centers and the change of the IR active modes was investigated by EPR and IR measurements. Semi-quantitative comparison of the BaCO3 and OH- group presence in IR spectra was calculated. The investigation showed that mechanical activation of BaTiO3 has a pronounced influence on the change of the powder particles structure and enables establishing the directions of possible BaTiO3 ceramics materials properties prognosis according to the synthesis-structure correlation.",
publisher = "Elsevier Science Sa, Lausanne",
journal = "Journal of Alloys and Compounds",
title = "Influence of mechanical activation on the structure of ultrafine BaTiO3 powders",
pages = "639-633",
number = "1-2",
volume = "486",
doi = "10.1016/j.jallcom.2009.07.008"
}

Pavlović, V. P., Popović, D., Krstić, J., Dojcilović, J., Babić, B. M.,& Pavlović, V.. (2009). Influence of mechanical activation on the structure of ultrafine BaTiO3 powders. in Journal of Alloys and Compounds
Elsevier Science Sa, Lausanne., 486(1-2), 633-639.
https://doi.org/10.1016/j.jallcom.2009.07.008

Pavlović VP, Popović D, Krstić J, Dojcilović J, Babić BM, Pavlović V. Influence of mechanical activation on the structure of ultrafine BaTiO3 powders. in Journal of Alloys and Compounds. 2009;486(1-2):633-639.
doi:10.1016/j.jallcom.2009.07.008 .

Pavlović, Vera P., Popović, D., Krstić, J., Dojcilović, J., Babić, Biljana M., Pavlović, Vladimir, "Influence of mechanical activation on the structure of ultrafine BaTiO3 powders" in Journal of Alloys and Compounds, 486, no. 1-2 (2009):633-639,
https://doi.org/10.1016/j.jallcom.2009.07.008 . .

TY  - JOUR
AU  - Pavlović, Vera P.
AU  - Stojanović, B.D.
AU  - Pavlović, Vladimir
AU  - Marinković-Stanojević, Z.
AU  - Živković, Lj.
AU  - Ristić, M.M.
PY  - 2008
UR  - http://aspace.agrif.bg.ac.rs/handle/123456789/1804
AB  - In this article the solid state reaction of BaTiO3 formation from a mechanically activated BaCO3-TiO2 system has been investigated. An equimolar mixture of BaCO3 and TiO2 powders was activated in a planetary ball mill in a continual regime for 0, 30 and 90 min, pressed and thermally treated up to 1200°C. The effect of the milling and firing regime on the phase formation was investigated by the X-ray diffraction (XRD) method and differential thermal analysis (DTA). Deconvolution of the experimental DTA curve corresponding to the BaTiO3 synthesis process has been performed. The influence of the activation time on the change of characteristic temperature for each elementary step in the complete solid-state reaction of BaTiO3 formation, was analyzed. These results were correlated with the ones obtained by SEM characterization and by XRD analysis.
AB  - U ovome radu je analiziran uticaj mehaničke aktivacije sistema BaCO3- TiO2 na formiranje BaTiO3. Ekvimolarne smeše praha BaCO3 i TiO2 su aktivirane u planetarnom mlinu u kontinualnom režimu tokom 0, 30 i 90 min. Uzorci su zatim presovani i termički tretirani do 1200oC. Efekat mlevenja i zagrevanja na promene faza je analiziran primenom rendgenske fazne analize i diferencijalne termijske analize. Izvršena je dekonvolucija eksperimentalno dobijene DTA krive koja odgovara procesu sinteze BaTiO3, kao i analiza uticaja vremena aktivacije na promene karakteristične temperature za svaki pojedinačni elementarni proces tokom sinteze barijum titanata. Ovi rezultati su korelisani sa rezultatima dobijenim SEM i XRD analizom.
PB  - Međunarodni Institut za nauku o sinterovanju, Beograd
T2  - Science of Sintering
T1  - Synthesis of BaTiO3 from a mechanically activated BaCO3-TiO2 system
EP  - 26
IS  - 1
SP  - 21
VL  - 40
DO  - 10.2298/SOS0801021P
ER  - 

@article{
author = "Pavlović, Vera P. and Stojanović, B.D. and Pavlović, Vladimir and Marinković-Stanojević, Z. and Živković, Lj. and Ristić, M.M.",
year = "2008",
abstract = "In this article the solid state reaction of BaTiO3 formation from a mechanically activated BaCO3-TiO2 system has been investigated. An equimolar mixture of BaCO3 and TiO2 powders was activated in a planetary ball mill in a continual regime for 0, 30 and 90 min, pressed and thermally treated up to 1200°C. The effect of the milling and firing regime on the phase formation was investigated by the X-ray diffraction (XRD) method and differential thermal analysis (DTA). Deconvolution of the experimental DTA curve corresponding to the BaTiO3 synthesis process has been performed. The influence of the activation time on the change of characteristic temperature for each elementary step in the complete solid-state reaction of BaTiO3 formation, was analyzed. These results were correlated with the ones obtained by SEM characterization and by XRD analysis., U ovome radu je analiziran uticaj mehaničke aktivacije sistema BaCO3- TiO2 na formiranje BaTiO3. Ekvimolarne smeše praha BaCO3 i TiO2 su aktivirane u planetarnom mlinu u kontinualnom režimu tokom 0, 30 i 90 min. Uzorci su zatim presovani i termički tretirani do 1200oC. Efekat mlevenja i zagrevanja na promene faza je analiziran primenom rendgenske fazne analize i diferencijalne termijske analize. Izvršena je dekonvolucija eksperimentalno dobijene DTA krive koja odgovara procesu sinteze BaTiO3, kao i analiza uticaja vremena aktivacije na promene karakteristične temperature za svaki pojedinačni elementarni proces tokom sinteze barijum titanata. Ovi rezultati su korelisani sa rezultatima dobijenim SEM i XRD analizom.",
publisher = "Međunarodni Institut za nauku o sinterovanju, Beograd",
journal = "Science of Sintering",
title = "Synthesis of BaTiO3 from a mechanically activated BaCO3-TiO2 system",
pages = "26-21",
number = "1",
volume = "40",
doi = "10.2298/SOS0801021P"
}

Pavlović, V. P., Stojanović, B.D., Pavlović, V., Marinković-Stanojević, Z., Živković, Lj.,& Ristić, M.M.. (2008). Synthesis of BaTiO3 from a mechanically activated BaCO3-TiO2 system. in Science of Sintering
Međunarodni Institut za nauku o sinterovanju, Beograd., 40(1), 21-26.
https://doi.org/10.2298/SOS0801021P

Pavlović VP, Stojanović B, Pavlović V, Marinković-Stanojević Z, Živković L, Ristić M. Synthesis of BaTiO3 from a mechanically activated BaCO3-TiO2 system. in Science of Sintering. 2008;40(1):21-26.
doi:10.2298/SOS0801021P .

Pavlović, Vera P., Stojanović, B.D., Pavlović, Vladimir, Marinković-Stanojević, Z., Živković, Lj., Ristić, M.M., "Synthesis of BaTiO3 from a mechanically activated BaCO3-TiO2 system" in Science of Sintering, 40, no. 1 (2008):21-26,
https://doi.org/10.2298/SOS0801021P . .