Hybrid amino-terminated lignin microspheres loaded with magnetite and manganese oxide nanoparticles: An effective hazardous oxyanions adsorbent
Authorized Users Only
2022
Authors
Popović, Ana L.Velicković, Zlate
Radovanović, Željko
Đolić, Maja
Pavlović, Vladimir
Marinković, Aleksandar D.
Gržetić, Jelena D.
Article (Published version)
Metadata
Show full item recordAbstract
Highly effective lignin-based microspheres were prepared by inverse copolymerization of lignin (kraft) from suspension, with poly(ethylene imine) and amino-functionalized magnetite nanoparticles (A-LMS_Fe3O4) or manganese(IV)oxide nanoparticles (A-LMS_MnO2). The XRD, FTIR, SEM, BET, TEM techniques, including the porosity determination, were performed to analyze morphological and structural properties of synthesized microspheres. The effect of pH, the adsorbent dosage, temperature and contact duration on a batch-mode adsorption efficiency of arsenate and chromate (oxy)anions removal was tested. Spontaneous adsorption was found to be feasible, reaching the adsorption capacities of Cr(VI) (62.9 mg g−1), As(V) (47.8 mg g−1) by A-LMS_Fe3O4, and of Cr(VI) (73.9 mg g−1), As(V) (62.5 mg g−1) using A-LMS_MnO2 adsorbent. Fast removal rates were confirmed via kinetic study, using pseudo-second order, the Weber-Morris and the single resistance mass-transfer model, with a limiting step of the diffu...sion transport through pores. The correlation of fixed-bed-column results with Bohart–Adams, Thomas, Yoon–Nelson and Dose Response models displayed that breakthrough behavior was influenced by flow rate and the inlet concentration. Significant potential of produced bio-adsorbent is further confirmed by the pore surface diffusion modeling, desorption study and adsorption from multi-component system using artificial water.
Keywords:
Batch and column system / Bio-adsorbent / Competitive adsorption / External and internal diffusional transport / Lignin / Nano-functionalizationSource:
Journal of Environmental Chemical Engineering, 2022, 10, 3, 108009-Funding / projects:
- Ministry of Science, Technological Development and Innovation of the Republic of Serbia, institutional funding - 200325 (Military Technical Institute - MTI, Belgrade) (RS-MESTD-inst-2020-200325)
- Ministry of Science, Technological Development and Innovation of the Republic of Serbia, institutional funding - 200326 (University of Defence, Military Academy, Belgrade) (RS-MESTD-inst-2020-200326)
- Ministry of Science, Technological Development and Innovation of the Republic of Serbia, institutional funding - 200116 (University of Belgrade, Faculty of Agriculture) (RS-MESTD-inst-2020-200116)
- Ministry of Science, Technological Development and Innovation of the Republic of Serbia, institutional funding - 200135 (University of Belgrade, Faculty of Technology and Metallurgy) (RS-MESTD-inst-2020-200135)
- COST Action CA17128 contributed to this work.
URI
https://www.sciencedirect.com/science/article/pii/S221334372200882Xhttp://aspace.agrif.bg.ac.rs/handle/123456789/6113
Collections
Institution/Community
Poljoprivredni fakultetTY - JOUR AU - Popović, Ana L. AU - Velicković, Zlate AU - Radovanović, Željko AU - Đolić, Maja AU - Pavlović, Vladimir AU - Marinković, Aleksandar D. AU - Gržetić, Jelena D. PY - 2022 UR - https://www.sciencedirect.com/science/article/pii/S221334372200882X UR - http://aspace.agrif.bg.ac.rs/handle/123456789/6113 AB - Highly effective lignin-based microspheres were prepared by inverse copolymerization of lignin (kraft) from suspension, with poly(ethylene imine) and amino-functionalized magnetite nanoparticles (A-LMS_Fe3O4) or manganese(IV)oxide nanoparticles (A-LMS_MnO2). The XRD, FTIR, SEM, BET, TEM techniques, including the porosity determination, were performed to analyze morphological and structural properties of synthesized microspheres. The effect of pH, the adsorbent dosage, temperature and contact duration on a batch-mode adsorption efficiency of arsenate and chromate (oxy)anions removal was tested. Spontaneous adsorption was found to be feasible, reaching the adsorption capacities of Cr(VI) (62.9 mg g−1), As(V) (47.8 mg g−1) by A-LMS_Fe3O4, and of Cr(VI) (73.9 mg g−1), As(V) (62.5 mg g−1) using A-LMS_MnO2 adsorbent. Fast removal rates were confirmed via kinetic study, using pseudo-second order, the Weber-Morris and the single resistance mass-transfer model, with a limiting step of the diffusion transport through pores. The correlation of fixed-bed-column results with Bohart–Adams, Thomas, Yoon–Nelson and Dose Response models displayed that breakthrough behavior was influenced by flow rate and the inlet concentration. Significant potential of produced bio-adsorbent is further confirmed by the pore surface diffusion modeling, desorption study and adsorption from multi-component system using artificial water. T2 - Journal of Environmental Chemical Engineering T2 - Journal of Environmental Chemical EngineeringJournal of Environmental Chemical Engineering T1 - Hybrid amino-terminated lignin microspheres loaded with magnetite and manganese oxide nanoparticles: An effective hazardous oxyanions adsorbent IS - 3 SP - 108009 VL - 10 DO - 10.1016/j.jece.2022.108009 ER -
@article{ author = "Popović, Ana L. and Velicković, Zlate and Radovanović, Željko and Đolić, Maja and Pavlović, Vladimir and Marinković, Aleksandar D. and Gržetić, Jelena D.", year = "2022", abstract = "Highly effective lignin-based microspheres were prepared by inverse copolymerization of lignin (kraft) from suspension, with poly(ethylene imine) and amino-functionalized magnetite nanoparticles (A-LMS_Fe3O4) or manganese(IV)oxide nanoparticles (A-LMS_MnO2). The XRD, FTIR, SEM, BET, TEM techniques, including the porosity determination, were performed to analyze morphological and structural properties of synthesized microspheres. The effect of pH, the adsorbent dosage, temperature and contact duration on a batch-mode adsorption efficiency of arsenate and chromate (oxy)anions removal was tested. Spontaneous adsorption was found to be feasible, reaching the adsorption capacities of Cr(VI) (62.9 mg g−1), As(V) (47.8 mg g−1) by A-LMS_Fe3O4, and of Cr(VI) (73.9 mg g−1), As(V) (62.5 mg g−1) using A-LMS_MnO2 adsorbent. Fast removal rates were confirmed via kinetic study, using pseudo-second order, the Weber-Morris and the single resistance mass-transfer model, with a limiting step of the diffusion transport through pores. The correlation of fixed-bed-column results with Bohart–Adams, Thomas, Yoon–Nelson and Dose Response models displayed that breakthrough behavior was influenced by flow rate and the inlet concentration. Significant potential of produced bio-adsorbent is further confirmed by the pore surface diffusion modeling, desorption study and adsorption from multi-component system using artificial water.", journal = "Journal of Environmental Chemical Engineering, Journal of Environmental Chemical EngineeringJournal of Environmental Chemical Engineering", title = "Hybrid amino-terminated lignin microspheres loaded with magnetite and manganese oxide nanoparticles: An effective hazardous oxyanions adsorbent", number = "3", pages = "108009", volume = "10", doi = "10.1016/j.jece.2022.108009" }
Popović, A. L., Velicković, Z., Radovanović, Ž., Đolić, M., Pavlović, V., Marinković, A. D.,& Gržetić, J. D.. (2022). Hybrid amino-terminated lignin microspheres loaded with magnetite and manganese oxide nanoparticles: An effective hazardous oxyanions adsorbent. in Journal of Environmental Chemical Engineering, 10(3), 108009. https://doi.org/10.1016/j.jece.2022.108009
Popović AL, Velicković Z, Radovanović Ž, Đolić M, Pavlović V, Marinković AD, Gržetić JD. Hybrid amino-terminated lignin microspheres loaded with magnetite and manganese oxide nanoparticles: An effective hazardous oxyanions adsorbent. in Journal of Environmental Chemical Engineering. 2022;10(3):108009. doi:10.1016/j.jece.2022.108009 .
Popović, Ana L., Velicković, Zlate, Radovanović, Željko, Đolić, Maja, Pavlović, Vladimir, Marinković, Aleksandar D., Gržetić, Jelena D., "Hybrid amino-terminated lignin microspheres loaded with magnetite and manganese oxide nanoparticles: An effective hazardous oxyanions adsorbent" in Journal of Environmental Chemical Engineering, 10, no. 3 (2022):108009, https://doi.org/10.1016/j.jece.2022.108009 . .