Selective Al-Ti reactivity in laser-processed Al/Ti multilayers
Само за регистроване кориснике
2017
Аутори
Perusko, DavorKovac, J.
Petrović, S.
Obradović, M.
Mitrić, M.
Pavlović, Vladimir
Salatić, B.
Jaksa, G.
Ciganović, J.
Milosavljević, M.
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Multilayers consisting of five (Al/Ti) bilayers were deposited on (100) silicon wafers. On top was deposited the Ti layer, aimed at preventing Al from diffusing to the surface upon laser treatment. The total thickness of the thin-film structure was 200 nm. Laser irradiations with Nd:YAG picoseconds laser pulses in the defocused regime were performed in air. Laser beam energy was 4 mJ and laser spot diameter on the sample surface was 3 mm (fluence 0.057 J cm(-2)). The samples were treated with different numbers of laser pulses. Structural characterizations were performed by different analytical methods and nano-hardness was also measured. Laser processing induced layer intermixing, formation of titanium aluminides, oxidation of the surface titanium layer and enhanced surface roughness. Aluminum appears at the sample surface only for the highest density of laser irradiation. Laser processing induces increment of nano-hardness by approximately 20% and decrease of residual Young's modulus ...for a few percentages from the starting value of the untreated samples. These results can be interesting toward achieving structures with a selective extent of Al-Ti reactivity in this multilayered system, within the development of biocompatible materials.
Кључне речи:
Multilayer / titanium / aluminium / laser / irradiation / mixing / intermetallic / aluminidesИзвор:
Materials and Manufacturing Processes, 2017, 32, 14, 1622-1627Издавач:
- Taylor & Francis Inc, Philadelphia
Финансирање / пројекти:
- Физички процеси у синтези нових наноструктурних материјала (RS-171023)
- Slovenian Research AgencySlovenian Research Agency - Slovenia [P2-0082]
DOI: 10.1080/10426914.2017.1279299
ISSN: 1042-6914
WoS: 000410863700008
Scopus: 2-s2.0-85013113332
Институција/група
Poljoprivredni fakultetTY - JOUR AU - Perusko, Davor AU - Kovac, J. AU - Petrović, S. AU - Obradović, M. AU - Mitrić, M. AU - Pavlović, Vladimir AU - Salatić, B. AU - Jaksa, G. AU - Ciganović, J. AU - Milosavljević, M. PY - 2017 UR - http://aspace.agrif.bg.ac.rs/handle/123456789/4497 AB - Multilayers consisting of five (Al/Ti) bilayers were deposited on (100) silicon wafers. On top was deposited the Ti layer, aimed at preventing Al from diffusing to the surface upon laser treatment. The total thickness of the thin-film structure was 200 nm. Laser irradiations with Nd:YAG picoseconds laser pulses in the defocused regime were performed in air. Laser beam energy was 4 mJ and laser spot diameter on the sample surface was 3 mm (fluence 0.057 J cm(-2)). The samples were treated with different numbers of laser pulses. Structural characterizations were performed by different analytical methods and nano-hardness was also measured. Laser processing induced layer intermixing, formation of titanium aluminides, oxidation of the surface titanium layer and enhanced surface roughness. Aluminum appears at the sample surface only for the highest density of laser irradiation. Laser processing induces increment of nano-hardness by approximately 20% and decrease of residual Young's modulus for a few percentages from the starting value of the untreated samples. These results can be interesting toward achieving structures with a selective extent of Al-Ti reactivity in this multilayered system, within the development of biocompatible materials. PB - Taylor & Francis Inc, Philadelphia T2 - Materials and Manufacturing Processes T1 - Selective Al-Ti reactivity in laser-processed Al/Ti multilayers EP - 1627 IS - 14 SP - 1622 VL - 32 DO - 10.1080/10426914.2017.1279299 ER -
@article{ author = "Perusko, Davor and Kovac, J. and Petrović, S. and Obradović, M. and Mitrić, M. and Pavlović, Vladimir and Salatić, B. and Jaksa, G. and Ciganović, J. and Milosavljević, M.", year = "2017", abstract = "Multilayers consisting of five (Al/Ti) bilayers were deposited on (100) silicon wafers. On top was deposited the Ti layer, aimed at preventing Al from diffusing to the surface upon laser treatment. The total thickness of the thin-film structure was 200 nm. Laser irradiations with Nd:YAG picoseconds laser pulses in the defocused regime were performed in air. Laser beam energy was 4 mJ and laser spot diameter on the sample surface was 3 mm (fluence 0.057 J cm(-2)). The samples were treated with different numbers of laser pulses. Structural characterizations were performed by different analytical methods and nano-hardness was also measured. Laser processing induced layer intermixing, formation of titanium aluminides, oxidation of the surface titanium layer and enhanced surface roughness. Aluminum appears at the sample surface only for the highest density of laser irradiation. Laser processing induces increment of nano-hardness by approximately 20% and decrease of residual Young's modulus for a few percentages from the starting value of the untreated samples. These results can be interesting toward achieving structures with a selective extent of Al-Ti reactivity in this multilayered system, within the development of biocompatible materials.", publisher = "Taylor & Francis Inc, Philadelphia", journal = "Materials and Manufacturing Processes", title = "Selective Al-Ti reactivity in laser-processed Al/Ti multilayers", pages = "1627-1622", number = "14", volume = "32", doi = "10.1080/10426914.2017.1279299" }
Perusko, D., Kovac, J., Petrović, S., Obradović, M., Mitrić, M., Pavlović, V., Salatić, B., Jaksa, G., Ciganović, J.,& Milosavljević, M.. (2017). Selective Al-Ti reactivity in laser-processed Al/Ti multilayers. in Materials and Manufacturing Processes Taylor & Francis Inc, Philadelphia., 32(14), 1622-1627. https://doi.org/10.1080/10426914.2017.1279299
Perusko D, Kovac J, Petrović S, Obradović M, Mitrić M, Pavlović V, Salatić B, Jaksa G, Ciganović J, Milosavljević M. Selective Al-Ti reactivity in laser-processed Al/Ti multilayers. in Materials and Manufacturing Processes. 2017;32(14):1622-1627. doi:10.1080/10426914.2017.1279299 .
Perusko, Davor, Kovac, J., Petrović, S., Obradović, M., Mitrić, M., Pavlović, Vladimir, Salatić, B., Jaksa, G., Ciganović, J., Milosavljević, M., "Selective Al-Ti reactivity in laser-processed Al/Ti multilayers" in Materials and Manufacturing Processes, 32, no. 14 (2017):1622-1627, https://doi.org/10.1080/10426914.2017.1279299 . .