Претраживање
Приказ резултата 11-20 од 35
Characterization of pressure-less sintered MgO-Al2O3-SiO2-TeO2 system
(Belgrade : Materials Research Society of Serbia, 2017)
In this study, sintering of two systems was investigated in parallel, pure cordierite 2MgO:2Al2O3:5SiO2, and cordierite with addition of 5 mass % TeO2. Green bodies were prepared from powder mixtures mechanically activated ...
The Influence of Mechanical Activation on Sintering Process of BaCO3-SrCO3-TiO2 System
(Belgrade : Serbian Ceramic Society, 2012)
In this article the influence of mechanical activation on sintering process of barium-strontiumtitanate ceramics has been investigated. Both non-activated and mixtures treated in planetary ball mill for 5, 10, 20, 40, 80 ...
Synthesis and Characterization of Multifferoics 16%(Fe2O3)4%(BaCO3)80%(BaTiO3)
(Belgrade : Serbian Ceramic Society, 2017)
The initial powder (16 % Fe2O3, 4 % BaCO3, 80 % BaTiO3) was mechanically activated in a planetary mill for 20, 80, 120, 160, 200 and 220 minutes in air. Modified Faraday method was used to perform magnetization measurements ...
Influence of mechanochemical activation on sintering of cordierite ceramics with the presence of Bi2O3 as a functional additive
(Belgrade : Materials Research Society of Serbia, 2011)
According to its exceptional electrical characteristics, such as low temperature expansion coefficient, low dielectric constant and good mechanical properties, cordierite, 2MgO⋅2Al2O3⋅5SiO2, represents very attractive ...
The effect of mechanical activation on synthesis and properties of MgAl2O4 ceramics
(Societa ceramica italianaPolitecnico di Torino, 2019)
Magnesium aluminate, MgAl2O4, and other alumina-based spinels are refractory ceramics with high hardness and resistance to chemical attack while also being possible microwave dielectrics. Pure MgAl2O4 can be optically ...
Electrical and mechanical properties of alumina doped with transition metal oxides sintered at 1400°C
(Societa ceramica italianaPolitecnico di Torino, 2019)
Corundum (alpha-alumina) is one of the most exploited materials in ceramic industry due to its good physico-chemical properties, mechanical properties, and, importantly, due to its low cost. Advantageous properties, such ...
Influence of one activated component on the sintering process of three phase system
(Belgrade : Materials Research Society of Serbia, 2013)
According to its low temperature thermal expansion coefficient, low dielectric constant, also good mechanical properties, cordierite, 2MgO×2Al2O3×5SiO2, represents a very attractive hightemperature ceramic material. In ...
Reaction kinetics of mechanically activated cordierite based ceramics studied via DTA
(Ljubljana : Central and Eastern European Committee for Thermal Analysis and Calorimetry, 2015)
Cordierite, 2MgO•2Ah03•5Si02 (MAS), is a very attractive high-temperature ceramic material. In order to accelerate the process of sintering, 5.00 mass% Mo03 was added to the starting mixtures. The mechanical activation of ...
Influence of different pore-forming agents on wollastonite microstructures
(Belgrade : Serbian Ceramic Society, 2016)
In this study, highly porous macro- and micro-cellular wollastonite-based ceramics was synthesized. Ceramic precursor, methylhydrocyclosiloxane, together with micro-sized CaCO3, was used as starting material. After 20 min ...
Adsorption capacity of wollastonite based adsorbents with porous structure controlled with different progeny agents
(Belgrade : Serbian Ceramic Society, 2016)
Porous wollastonite (WL) based adsorbents were fabricated by a pressureless sintering process by using low molecular weight poly(methyl methacrylate) (PMMA), nanocellulose (NC) and yeast as the pore forming agents. WL based ...