Претраживање
Приказ резултата 21-30 од 35
The influence of tribophysical activation on non-isothermal sintering of BaTiO3 ceramics
(Trans Tech Publications Ltd, Durnten-Zurich, 2006)
In this paper the influence of tribophysical activation on non-isothermal sintering of barium titanate has been investigated. BaTiO3 Powders were tribophysically activated in a planetary ball mill for 0, 60 and 120 min., ...
Influence of different pore-forming agents on wollastonite microstructures
(Belgrade : Serbian Ceramic Society, 2016)
In this study, highly porous macro- and micro-cellular wollastonite-based ceramics was synthesized. Ceramic precursor, methylhydrocyclosiloxane, together with micro-sized CaCO3, was used as starting material. After 20 min ...
Structural and electrical properties of barium-zinc-titanate ceramics sintered at 1300ºc
(Belgrade : Institute of Technical Sciences of SASA, 2010)
The aim of this work was an investigation of structural and electrical properties of sintered barium-zinc-titanate ceramics. Mixtures of BaCO3, ZnO and TiO2 were mechanically activated in a planetary ball mill up to 80 ...
The influence of mechanical activation on the electrical properties of Ba0.77Sr0.23TiO3
(2013)
Poster presented at the conference Advanced Ceramics and Application II – Serbian Ceramic Society, Belgrade, September 30 – October 1, 2013
Microstructure evolution and sintering kinetics of ZnO
(Belgrade : Institute of Technical Sciences of SASA, 2010)
The aim of this paper was to analyse the sintering kinetics and microstructure evolution of ZnO. Powder was isothermally sintered (15, 30, 60, 90 and 120 minutes) in the temperature range from 800 to 1200oC. The values of ...
Adsorption capacity of wollastonite based adsorbents with porous structure controlled with different progeny agents
(Belgrade : Serbian Ceramic Society, 2016)
Porous wollastonite (WL) based adsorbents were fabricated by a pressureless sintering process by using low molecular weight poly(methyl methacrylate) (PMMA), nanocellulose (NC) and yeast as the pore forming agents. WL based ...
Shungite - a Russian mineral: possible application as a microwave absorber
(Belgrade : Materials Research Society of Serbia, 2018)
The paper presents results of investigation of the influence of mechanical activation of shungite, a Russian natural mineral rich in silica and carbon, on its sintering behavior. The mechanical activation of the starting ...
Characterization of MgAl2O4 sintered ceramics
(Belgrade : Serbian Ceramic Society, 2019)
Single crystalline phase MgAl2O4 is made from the predetermined composition of MgO-Al2O3 powder mixture by using ball-milling. Mixtures of MgO and Al2O3 are treated in planetary ball mill for 30, 60, 90 and 120 minutes, ...
Barium-zinc-titanate ceramics
(Kiev : National Academy of Sciences of Ukraine (NASU); Frantsevych Institute for Problems of Materials Science of NASU; National Technical University of Ukraine "KPI"; Ukrainian Materials Science Society; INTEM LTD, 2010)
Starting mixtures of BaCO3, ZnO and TiO2 powders were mechanically activated in a planetary ball mill for various periods of time. The powders obtained were sintered nonisothermally to temperatures between 1100 and 1300°C ...
Sintering of cordierite in the presence of MoO3 and crystallization analysis
(Belgrade : Materials Research Society of Serbia, 2014)
Cordierite (MAS) is difficult to sinter because of the very narrow sintering temperature range (1300-1400ºC). Because a low temperature process is desirable, it is necessary to find functional ads which can allow easier ...